From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] Char/Misc/IIO driver fixes for 7.4-rc4
Date: Mon, 16 Nov 2026 11:53:48 +0100 [thread overview]
Message-ID: <avrgvJDaBJit5pfa@kroah.com> (raw)
The following changes since commit 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4:
Linux 7.4-rc1 (2026-11-01 13:26:31 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git tags/char-misc-7.4-rc4
for you to fetch changes up to 4dbe5ea929ac5a5b8dc21787d0e79fc55a0ea9ac:
Merge tag 'iio-fixes-for-7.4a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus (2026-11-11 09:04:02 -0500)
----------------------------------------------------------------
Char/Misc/IIO driver fixes for 7.4-rc4
Here are a bunch of char, misc, and iio driver fixes for reported
problems for 7.4-rc4. Included in here are:
- usual collection of lots of IIO driver fixes for issues
- binder driver fix
- iio, w1, and comedi driver fixes found and fixed by Josef
- comedi driver fix for a reported problem
- other misc driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alexander Sarmanow (1):
iio: light: vcnl4035: Fix reversed ALS mode bit
Alexis Bouzigues (2):
iio: accel: adxl345: select IIO_BUFFER and IIO_KFIFO_BUF
iio: accel: adxl313: add missing buffer selections in Kconfig
Alice Ryhl (1):
rust_binder: push BR_TRANSACTION_COMPLETE before BR_FAILED_REPLY
Andrea Amer (1):
iio: afe: rescale: expose offset if rescaler or source has one
Antonio Vázquez Blanco (1):
mei: me: add ice lake point LP iTouch DID
Arka Mondal (2):
dt-bindings: iio: dac: adi,ad5758: Fix the 4 mA to 20 mA current range
iio: dac: ad5758: Fix the 4 mA to 20 mA current range
Arnav Kapoor (8):
iio: imu: inv_mpu6050: fix magnetometer scale of Y and Z axes
iio: imu: inv_mpu6050: fix swapped accel and gyro startup times
iio: common: scmi_sensors: fix truncating 64-bit divisions
iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE
iio: proximity: sx9324: fix out-of-bounds read of scan period table
iio: adc: mcp3564: reject devices without match data
iio: proximity: sx9360: fix sampling frequency write and available range
iio: proximity: sx9500: ignore event config writes that don't change state
Baek Kyu, Kim (1):
iio: dac: mcp4725: Update the cached DAC value only on success
Billy Tsai (2):
dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
iio: adc: aspeed: Use syscon phandle for trimming data when available
Changyul Lee (1):
iio: trigger: free the trigger ID after device_del()
Christopher Hoover (2):
iio: temperature: hid-sensor-temperature: Use per-instance callbacks
iio: humidity: hid-sensor-humidity: Use per-instance callbacks
Daniel Schaefer (1):
iio: light: hid-sensor-als: Don't read past the end of short fields
David Carlier (1):
iio: dac: mcp47feb02: reject out-of-range raw values
Greg Kroah-Hartman (1):
Merge tag 'iio-fixes-for-7.4a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Guangshuo Li (2):
iio: accel: kxsd9: Fix potential use-after-free on removal
misc: bcm-vk: fix DMA allocation memory leak
Ian Abbott (1):
comedi: comedi_bond: Fix leak of opened device references
Jan Remes (1):
iio: light: tsl2591: don't divide by zero
Jean-Baptiste Maneyrol (3):
iio: inv_sensors: prevent timestamps going back in time in transitions
iio: inv_sensors: do not compute period estimation when updating odr
iio: imu: inv_icm42600: fix parsing of all FIFO frames for odr change
Jiale Yao (3):
iio: gyro: bmg160: reject duplicate event disable
iio: imu: kmx61: reject duplicate event disable
misc: ibmvmc: initialize HMC state before device registration
Josef Bacik (22):
iio: sx9310: use the data of the I2C table
iio: addac: ad74413r: fix the values of set_multiple
iio: adc: ad7923: add the AD7927 to the SPI ID table
iio: adc: check the result of ad_sd_init()
iio: accel: adxl380: don't stay in standby on -EINVAL
comedi: fix endless recursion in comedi_event()
comedi: addi_apci_1500: fix clearing of the gate enable
comedi: ni_660x: don't poll without a DMA channel
comedi: ni_tio: Fix overflow of the clock period
comedi: vmk80xx: report failed transfers of the K8061
misc: vmw_vmci: wait for callbacks in event unsubscribe
w1: use the bus mutex for the "rw" file
w1: remove the master's files before taking its locks
w1: ds2482: set the strong pull-up with its byte
w1: ds28e04: use the bus mutex to talk on the bus
w1: ds2805: use the bus mutex to talk on the bus
w1: netlink: drop the slave after the bus is unlocked
w1: don't hold list_mutex while a slave is torn down
w1: w1_therm: lock the list of slaves for the bulk read
w1: w1_therm: leave the slaves of other families alone
mei: lb: read the MTU once
iio: hid-sensors: fix a division by zero
Karl Mehltretter (1):
iio: trigger: Return an error when the trigger has no free irq
Loic Poulain (1):
iio: adc: qcom-spmi-adc5-gen3: Reuse IIO device ID for ADC_TM aux device
Maximilian Czirr (1):
iio: hid-sensor: Fix scale for magnetic north heading
Myeonghun Pak (1):
iio: proximity: hx9023s: Allocate trigger before requesting IRQ
Nikhil Gautam (1):
iio: atlas-ezo: Fix humidity channel read support
Salah Triki (1):
iio: temperature: mlx90614: Fix dual channel probe condition check
Shashank Mohan Jain (2):
iio: magnetometer: mmc35240: leave cache-only mode before the cache sync
iio: magnetometer: mmc5633: leave cache-only mode before the cache sync
Srinivas Pandruvada (1):
iio: hid-sensors: fix fractional part for unit exponents -7 and -8
Vidhu Sarwal (1):
iio: humidity: am2315: fix negative temperature decoding
Viral Patel (1):
iio: magnetometer: tlv493d: fix magnetic field scale
Yu-Hsiang Tseng (1):
iio: acpi: Accept comma separated values in ROTM strings
.../bindings/iio/adc/aspeed,ast2600-adc.yaml | 17 ++++
.../devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 +-
drivers/android/binder/error.rs | 1 -
drivers/android/binder/thread.rs | 31 +++----
drivers/comedi/comedi_fops.c | 2 +-
drivers/comedi/drivers/addi_apci_1500.c | 2 +-
drivers/comedi/drivers/comedi_bond.c | 24 ++++--
drivers/comedi/drivers/ni_660x.c | 3 +-
drivers/comedi/drivers/ni_tio.c | 2 +-
drivers/comedi/drivers/vmk80xx.c | 25 +++---
drivers/iio/accel/Kconfig | 4 +
drivers/iio/accel/adxl380.c | 11 ++-
drivers/iio/accel/kxsd9.c | 2 +-
drivers/iio/adc/ad7780.c | 4 +-
drivers/iio/adc/ad7791.c | 4 +-
drivers/iio/adc/ad7793.c | 4 +-
drivers/iio/adc/ad7923.c | 1 +
drivers/iio/adc/aspeed_adc.c | 25 ++++--
drivers/iio/adc/max11205.c | 4 +-
drivers/iio/adc/mcp3564.c | 3 +
drivers/iio/adc/qcom-spmi-adc5-gen3.c | 5 +-
drivers/iio/addac/ad74413r.c | 2 +-
drivers/iio/afe/iio-rescale.c | 3 +-
drivers/iio/chemical/atlas-ezo-sensor.c | 3 -
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 5 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 14 +++-
.../iio/common/inv_sensors/inv_sensors_timestamp.c | 24 ++++--
drivers/iio/common/scmi_sensors/scmi_iio.c | 27 +++---
drivers/iio/dac/ad5758.c | 4 +-
drivers/iio/dac/mcp4725.c | 2 +
drivers/iio/dac/mcp47feb02-core.c | 3 +
drivers/iio/gyro/bmg160_core.c | 2 +-
drivers/iio/humidity/am2315.c | 12 ++-
drivers/iio/humidity/hid-sensor-humidity.c | 14 ++--
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 24 +++---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 97 +++++++++++++++++-----
drivers/iio/imu/kmx61.c | 2 +-
drivers/iio/industrialio-acpi.c | 9 ++
drivers/iio/industrialio-trigger.c | 4 +-
drivers/iio/light/hid-sensor-als.c | 16 +++-
drivers/iio/light/tsl2591.c | 32 ++++---
drivers/iio/light/vcnl4035.c | 4 +-
drivers/iio/magnetometer/mmc35240.c | 3 +-
drivers/iio/magnetometer/mmc5633.c | 3 +-
drivers/iio/magnetometer/tlv493d.c | 6 +-
drivers/iio/proximity/hx9023s.c | 16 ++--
drivers/iio/proximity/sx9310.c | 2 +-
drivers/iio/proximity/sx9324.c | 13 ++-
drivers/iio/proximity/sx9360.c | 29 +++++--
drivers/iio/proximity/sx9500.c | 6 ++
drivers/iio/temperature/hid-sensor-temperature.c | 14 ++--
drivers/iio/temperature/mlx90614.c | 2 +-
drivers/misc/bcm-vk/bcm_vk_sg.c | 43 ++++++++--
drivers/misc/ibmvmc.c | 16 ++--
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/mei_lb.c | 12 ++-
drivers/misc/mei/pci-me.c | 1 +
drivers/misc/vmw_vmci/vmci_event.c | 7 +-
drivers/w1/masters/ds2482.c | 36 ++++----
drivers/w1/slaves/w1_ds2805.c | 8 +-
drivers/w1/slaves/w1_ds28e04.c | 18 ++--
drivers/w1/slaves/w1_therm.c | 45 ++++++----
drivers/w1/w1.c | 21 +++--
drivers/w1/w1_int.c | 8 +-
drivers/w1/w1_netlink.c | 8 +-
include/linux/iio/common/inv_sensors_timestamp.h | 3 +-
66 files changed, 549 insertions(+), 253 deletions(-)
reply other threads:[~2026-11-16 10:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avrgvJDaBJit5pfa@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®