From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: Fuad Tabba <fuad.tabba@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>,
kvm@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Isaku Yamahata <isaku.yamahata@intel.com>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@kernel.org>,
kvmarm@lists.linux.dev, Wei-Lin Chang <weilin.chang@arm.com>,
Will Deacon <will@kernel.org>, Fuad Tabba <tabba@google.com>
Subject: Re: [PATCH v2 2/2] KVM: selftests: Test KVM_PRE_FAULT_MEMORY against a full dirty ring
Date: Tue, 17 Nov 2026 14:36:06 +0000 [thread overview]
Message-ID: <avxj4cTtgy6gOLyC@gremlin> (raw)
In-Reply-To: <20261117074428.7544-3-fuad.tabba@linux.dev>
On Tue, Nov 17, 2026 at 07:44:28AM +0000, Fuad Tabba wrote:
> Pre-fault more populated, dirty-logged pages than the vCPU's dirty ring
> holds, and check that each call stops before the ring overflows, that a
> retry returns ENOSPC without progress, and that each page is reported
> exactly once. A read pre-fault can map a page read-only, or
> access-tracked on x86 without EPT A/D bits, so skip the case if
> pre-faulting doesn't dirty any page.
>
> Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
LGTM!
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
> ---
> .../selftests/kvm/pre_fault_memory_test.c | 101 ++++++++++++++++++
> 1 file changed, 101 insertions(+)
>
> diff --git a/tools/testing/selftests/kvm/pre_fault_memory_test.c b/tools/testing/selftests/kvm/pre_fault_memory_test.c
> index 3082fe09b95fa..72c501afc873b 100644
> --- a/tools/testing/selftests/kvm/pre_fault_memory_test.c
> +++ b/tools/testing/selftests/kvm/pre_fault_memory_test.c
> @@ -5,6 +5,9 @@
> * Author:
> * Isaku Yamahata <isaku.yamahata at gmail.com>
> */
> +#include <asm/barrier.h>
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> #include <linux/sizes.h>
>
> #include <test_util.h>
> @@ -17,6 +20,8 @@
> /* Arbitrarily chosen values */
> #define TEST_BASE_SIZE SZ_2M
> #define TEST_SLOT 10
> +/* Large enough for the entries every architecture reserves. */
> +#define TEST_RING_SIZE SZ_64K
>
> /* Storage of test info to share with guest code */
> struct test_config {
> @@ -281,6 +286,101 @@ static void test_pre_fault_memory(unsigned long vm_type, enum vm_mem_backing_src
> for_each_guest_mode(__test_pre_fault_memory, &p);
> }
>
> +/*
> + * Pre-fault more dirty-logged pages than the ring holds: each call has to stop
> + * before the ring overflows, and no entry may be lost.
> + */
> +static void test_pre_fault_dirty_ring(void)
> +{
> + const u64 entries = TEST_RING_SIZE / sizeof(struct kvm_dirty_gfn);
> + const u64 npages = entries + entries / 4;
> + struct kvm_pre_fault_memory range, left;
> + struct kvm_dirty_gfn *gfns, *cur;
> + u64 harvested = 0, size;
> + struct kvm_vcpu *vcpu;
> + unsigned long *seen;
> + int ret, stops = 0;
> + struct kvm_vm *vm;
> + u32 fetch = 0;
> + gpa_t gpa;
> +
> + if (!kvm_has_cap(KVM_CAP_DIRTY_LOG_RING) && !kvm_has_cap(KVM_CAP_DIRTY_LOG_RING_ACQ_REL)) {
> + pr_info("Skipping the dirty ring test: no dirty ring\n");
> + return;
> + }
> +
> + vm = vm_create(1);
> + vm_enable_dirty_ring(vm, TEST_RING_SIZE);
> + vcpu = vm_vcpu_add(vm, 0, NULL);
> + gfns = vcpu_map_dirty_ring(vcpu);
> +
> + /* A ring entry is a host page. */
> + size = npages * getpagesize();
> + gpa = align_down(vm->max_gfn * vm->page_size - size, SZ_2M);
> + vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, gpa, TEST_SLOT,
> + vm_num_guest_pages(vm->mode, npages), KVM_MEM_LOG_DIRTY_PAGES);
> +
> + /* Populate the pages, so that pre-faulting can map them writable. */
> + memset(addr_gpa2hva(vm, gpa), 1, size);
> +
> + seen = bitmap_zalloc(npages);
> + TEST_ASSERT(seen, "Failed to allocate the bitmap of reported pages");
> +
> + range = (struct kvm_pre_fault_memory) { .gpa = gpa, .size = size };
> + while (range.size) {
> + u64 n;
> +
> + vcpu_ioctl(vcpu, KVM_PRE_FAULT_MEMORY, &range);
> +
> + if (range.size) {
> + left = range;
> + ret = __vcpu_ioctl(vcpu, KVM_PRE_FAULT_MEMORY, &range);
> + TEST_ASSERT_VM_VCPU_IOCTL(ret == -1 && errno == ENOSPC,
> + KVM_PRE_FAULT_MEMORY, ret, vm);
> + TEST_ASSERT(range.gpa == left.gpa && range.size == left.size,
> + "KVM_PRE_FAULT_MEMORY made progress on a full ring");
> + stops++;
> + }
> +
> + for (n = 0; ; n++) {
> + cur = &gfns[fetch % entries];
> + /* Pairs with the smp_wmb() in kvm_dirty_ring_push(). */
> + if (smp_load_acquire(&cur->flags) != KVM_DIRTY_GFN_F_DIRTY)
> + break;
> +
> + TEST_ASSERT(cur->slot == TEST_SLOT && cur->offset < npages,
> + "Ring entry %u: slot %u offset 0x%llx, expected slot %u offset < 0x%lx",
> + fetch, cur->slot, cur->offset, TEST_SLOT, npages);
> + TEST_ASSERT(!__test_and_set_bit(cur->offset, seen),
> + "Ring entry %u: offset 0x%llx reported twice",
> + fetch, cur->offset);
> + /* Pairs with kvm_dirty_gfn_harvested()'s smp_load_acquire(). */
> + smp_store_release(&cur->flags, KVM_DIRTY_GFN_F_RESET);
> + fetch++;
> + }
> +
> + /* A read pre-fault can map a page read-only, or access-tracked on x86. */
> + if (!n && !harvested && !range.size) {
> + pr_info("Skipping the dirty ring test: pre-faulting dirtied no pages\n");
> + bitmap_free(seen);
> + kvm_vm_free(vm);
> + return;
> + }
> + TEST_ASSERT(n, "KVM_PRE_FAULT_MEMORY pushed nothing to the ring");
> + TEST_ASSERT(kvm_vm_reset_dirty_ring(vm) == n,
> + "KVM_RESET_DIRTY_RINGS didn't reset %lu entries", n);
> + harvested += n;
> + }
> +
> + TEST_ASSERT(harvested == npages, "%lu ring entries for %lu pages", harvested, npages);
> + TEST_ASSERT(stops, "KVM_PRE_FAULT_MEMORY never stopped for a %lu-entry ring", entries);
> + pr_info("Pre-faulted %lu pages through a %lu-entry ring, stopping %d times\n",
> + npages, entries, stops);
> +
> + bitmap_free(seen);
> + kvm_vm_free(vm);
> +}
> +
> static void help(char *name)
> {
> puts("");
> @@ -320,5 +420,6 @@ int main(int argc, char *argv[])
> test_pre_fault_memory(KVM_X86_SW_PROTECTED_VM, backing, false);
> test_pre_fault_memory(KVM_X86_SW_PROTECTED_VM, backing, true);
> #endif
> + test_pre_fault_dirty_ring();
> return 0;
> }
> --
> 2.47.3
>
--
Cheers, Lorenzo
prev parent reply other threads:[~2026-11-17 14:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 7:44 [PATCH v2 0/2] KVM: Bound KVM_PRE_FAULT_MEMORY by the vCPU's " Fuad Tabba
2026-11-17 7:44 ` [PATCH v2 1/2] KVM: Stop KVM_PRE_FAULT_MEMORY when the vCPU's dirty ring is full Fuad Tabba
2026-11-17 14:23 ` Lorenzo Stoakes (ARM)
2026-11-17 7:44 ` [PATCH v2 2/2] KVM: selftests: Test KVM_PRE_FAULT_MEMORY against a full dirty ring Fuad Tabba
2026-11-17 14:36 ` Lorenzo Stoakes (ARM) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avxj4cTtgy6gOLyC@gremlin \
--to=ljs@kernel.org \
--cc=alexandru.elisei@arm.com \
--cc=corbet@lwn.net \
--cc=fuad.tabba@linux.dev \
--cc=isaku.yamahata@intel.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=seanjc@google.com \
--cc=skhan@linuxfoundation.org \
--cc=tabba@google.com \
--cc=weilin.chang@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®