From: Hans de Goede <hdegoede@redhat.com>
To: Maximilian Luz <luzmaximilian@gmail.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Mark Gross <mgross@linux.intel.com>, Len Brown <lenb@kernel.org>,
Mark Pearson <markpearson@lenovo.com>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
platform-driver-x86@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 4/4] platform/surface: Add platform profile driver
Date: Thu, 4 Mar 2021 12:01:43 +0100 [thread overview]
Message-ID: <b075f6f6-a947-2847-1488-762584ca3bb6@redhat.com> (raw)
In-Reply-To: <20210211201703.658240-5-luzmaximilian@gmail.com>
Hi,
On 2/11/21 9:17 PM, Maximilian Luz wrote:
> Add a driver to provide platform profile support on 5th- and later
> generation Microsoft Surface devices with a Surface System Aggregator
> Module. On those devices, the platform profile can be used to influence
> cooling behavior and power consumption.
>
> For example, the default 'quiet' profile limits fan noise and in turn
> sacrifices performance of the discrete GPU found on Surface Books. Its
> full performance can only be unlocked on the 'performance' profile.
>
> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> MAINTAINERS | 6 +
> drivers/platform/surface/Kconfig | 22 ++
> drivers/platform/surface/Makefile | 1 +
> .../surface/surface_platform_profile.c | 190 ++++++++++++++++++
> 4 files changed, 219 insertions(+)
> create mode 100644 drivers/platform/surface/surface_platform_profile.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 000a82f59c76..a08d65f8f0df 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11811,6 +11811,12 @@ L: platform-driver-x86@vger.kernel.org
> S: Maintained
> F: drivers/platform/surface/surface_hotplug.c
>
> +MICROSOFT SURFACE PLATFORM PROFILE DRIVER
> +M: Maximilian Luz <luzmaximilian@gmail.com>
> +L: platform-driver-x86@vger.kernel.org
> +S: Maintained
> +F: drivers/platform/surface/surface_platform_profile.c
> +
> MICROSOFT SURFACE PRO 3 BUTTON DRIVER
> M: Chen Yu <yu.c.chen@intel.com>
> L: platform-driver-x86@vger.kernel.org
> diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
> index 179b8c93d7fd..a045425026ae 100644
> --- a/drivers/platform/surface/Kconfig
> +++ b/drivers/platform/surface/Kconfig
> @@ -132,6 +132,28 @@ config SURFACE_HOTPLUG
> Select M or Y here, if you want to (fully) support hot-plugging of
> dGPU devices on the Surface Book 2 and/or 3 during D3cold.
>
> +config SURFACE_PLATFORM_PROFILE
> + tristate "Surface Platform Profile Driver"
> + depends on SURFACE_AGGREGATOR_REGISTRY
> + select ACPI_PLATFORM_PROFILE
> + help
> + Provides support for the ACPI platform profile on 5th- and later
> + generation Microsoft Surface devices.
> +
> + More specifically, this driver provides ACPI platform profile support
> + on Microsoft Surface devices with a Surface System Aggregator Module
> + (SSAM) connected via the Surface Serial Hub (SSH / SAM-over-SSH). In
> + other words, this driver provides platform profile support on the
> + Surface Pro 5, Surface Book 2, Surface Laptop, Surface Laptop Go and
> + later. On those devices, the platform profile can significantly
> + influence cooling behavior, e.g. setting it to 'quiet' (default) or
> + 'low-power' can significantly limit performance of the discrete GPU on
> + Surface Books, while in turn leading to lower power consumption and/or
> + less fan noise.
> +
> + Select M or Y here, if you want to include ACPI platform profile
> + support on the above mentioned devices.
> +
> config SURFACE_PRO3_BUTTON
> tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
> depends on INPUT
> diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
> index 80035ee540bf..99372c427b73 100644
> --- a/drivers/platform/surface/Makefile
> +++ b/drivers/platform/surface/Makefile
> @@ -13,4 +13,5 @@ obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o
> obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o
> obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o
> obj-$(CONFIG_SURFACE_HOTPLUG) += surface_hotplug.o
> +obj-$(CONFIG_SURFACE_PLATFORM_PROFILE) += surface_platform_profile.o
> obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
> diff --git a/drivers/platform/surface/surface_platform_profile.c b/drivers/platform/surface/surface_platform_profile.c
> new file mode 100644
> index 000000000000..0081b01a5b0f
> --- /dev/null
> +++ b/drivers/platform/surface/surface_platform_profile.c
> @@ -0,0 +1,190 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Surface Platform Profile / Performance Mode driver for Surface System
> + * Aggregator Module (thermal subsystem).
> + *
> + * Copyright (C) 2021 Maximilian Luz <luzmaximilian@gmail.com>
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_profile.h>
> +#include <linux/types.h>
> +
> +#include <linux/surface_aggregator/device.h>
> +
> +enum ssam_tmp_profile {
> + SSAM_TMP_PROFILE_NORMAL = 1,
> + SSAM_TMP_PROFILE_BATTERY_SAVER = 2,
> + SSAM_TMP_PROFILE_BETTER_PERFORMANCE = 3,
> + SSAM_TMP_PROFILE_BEST_PERFORMANCE = 4,
> +};
> +
> +struct ssam_tmp_profile_info {
> + __le32 profile;
> + __le16 unknown1;
> + __le16 unknown2;
> +} __packed;
> +
> +struct ssam_tmp_profile_device {
> + struct ssam_device *sdev;
> + struct platform_profile_handler handler;
> +};
> +
> +static SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_tmp_profile_get, struct ssam_tmp_profile_info, {
> + .target_category = SSAM_SSH_TC_TMP,
> + .command_id = 0x02,
> +});
> +
> +static SSAM_DEFINE_SYNC_REQUEST_CL_W(__ssam_tmp_profile_set, __le32, {
> + .target_category = SSAM_SSH_TC_TMP,
> + .command_id = 0x03,
> +});
> +
> +static int ssam_tmp_profile_get(struct ssam_device *sdev, enum ssam_tmp_profile *p)
> +{
> + struct ssam_tmp_profile_info info;
> + int status;
> +
> + status = ssam_retry(__ssam_tmp_profile_get, sdev, &info);
> + if (status < 0)
> + return status;
> +
> + *p = le32_to_cpu(info.profile);
> + return 0;
> +}
> +
> +static int ssam_tmp_profile_set(struct ssam_device *sdev, enum ssam_tmp_profile p)
> +{
> + __le32 profile_le = cpu_to_le32(p);
> +
> + return ssam_retry(__ssam_tmp_profile_set, sdev, &profile_le);
> +}
> +
> +static int convert_ssam_to_profile(struct ssam_device *sdev, enum ssam_tmp_profile p)
> +{
> + switch (p) {
> + case SSAM_TMP_PROFILE_NORMAL:
> + return PLATFORM_PROFILE_BALANCED;
> +
> + case SSAM_TMP_PROFILE_BATTERY_SAVER:
> + return PLATFORM_PROFILE_LOW_POWER;
> +
> + case SSAM_TMP_PROFILE_BETTER_PERFORMANCE:
> + return PLATFORM_PROFILE_BALANCED_PERFORMANCE;
> +
> + case SSAM_TMP_PROFILE_BEST_PERFORMANCE:
> + return PLATFORM_PROFILE_PERFORMANCE;
> +
> + default:
> + dev_err(&sdev->dev, "invalid performance profile: %d", p);
> + return -EINVAL;
> + }
> +}
> +
> +static int convert_profile_to_ssam(struct ssam_device *sdev, enum platform_profile_option p)
> +{
> + switch (p) {
> + case PLATFORM_PROFILE_LOW_POWER:
> + return SSAM_TMP_PROFILE_BATTERY_SAVER;
> +
> + case PLATFORM_PROFILE_BALANCED:
> + return SSAM_TMP_PROFILE_NORMAL;
> +
> + case PLATFORM_PROFILE_BALANCED_PERFORMANCE:
> + return SSAM_TMP_PROFILE_BETTER_PERFORMANCE;
> +
> + case PLATFORM_PROFILE_PERFORMANCE:
> + return SSAM_TMP_PROFILE_BEST_PERFORMANCE;
> +
> + default:
> + /* This should have already been caught by platform_profile_store(). */
> + WARN(true, "unsupported platform profile");
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int ssam_platform_profile_get(struct platform_profile_handler *pprof,
> + enum platform_profile_option *profile)
> +{
> + struct ssam_tmp_profile_device *tpd;
> + enum ssam_tmp_profile tp;
> + int status;
> +
> + tpd = container_of(pprof, struct ssam_tmp_profile_device, handler);
> +
> + status = ssam_tmp_profile_get(tpd->sdev, &tp);
> + if (status)
> + return status;
> +
> + status = convert_ssam_to_profile(tpd->sdev, tp);
> + if (status < 0)
> + return status;
> +
> + *profile = status;
> + return 0;
> +}
> +
> +static int ssam_platform_profile_set(struct platform_profile_handler *pprof,
> + enum platform_profile_option profile)
> +{
> + struct ssam_tmp_profile_device *tpd;
> + int tp;
> +
> + tpd = container_of(pprof, struct ssam_tmp_profile_device, handler);
> +
> + tp = convert_profile_to_ssam(tpd->sdev, profile);
> + if (tp < 0)
> + return tp;
> +
> + return ssam_tmp_profile_set(tpd->sdev, tp);
> +}
> +
> +static int surface_platform_profile_probe(struct ssam_device *sdev)
> +{
> + struct ssam_tmp_profile_device *tpd;
> +
> + tpd = devm_kzalloc(&sdev->dev, sizeof(*tpd), GFP_KERNEL);
> + if (!tpd)
> + return -ENOMEM;
> +
> + tpd->sdev = sdev;
> +
> + tpd->handler.profile_get = ssam_platform_profile_get;
> + tpd->handler.profile_set = ssam_platform_profile_set;
> +
> + set_bit(PLATFORM_PROFILE_LOW_POWER, tpd->handler.choices);
> + set_bit(PLATFORM_PROFILE_BALANCED, tpd->handler.choices);
> + set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE, tpd->handler.choices);
> + set_bit(PLATFORM_PROFILE_PERFORMANCE, tpd->handler.choices);
> +
> + platform_profile_register(&tpd->handler);
> + return 0;
> +}
> +
> +static void surface_platform_profile_remove(struct ssam_device *sdev)
> +{
> + platform_profile_remove();
> +}
> +
> +static const struct ssam_device_id ssam_platform_profile_match[] = {
> + { SSAM_SDEV(TMP, 0x01, 0x00, 0x01) },
> + { },
> +};
> +MODULE_DEVICE_TABLE(ssam, ssam_platform_profile_match);
> +
> +static struct ssam_device_driver surface_platform_profile = {
> + .probe = surface_platform_profile_probe,
> + .remove = surface_platform_profile_remove,
> + .match_table = ssam_platform_profile_match,
> + .driver = {
> + .name = "surface_platform_profile",
> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> + },
> +};
> +module_ssam_device_driver(surface_platform_profile);
> +
> +MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
> +MODULE_DESCRIPTION("Platform Profile Support for Surface System Aggregator Module");
> +MODULE_LICENSE("GPL");
>
next prev parent reply other threads:[~2021-03-04 11:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 20:16 [PATCH v2 0/4] platform/surface: Add platform profile driver for Surface devices Maximilian Luz
2021-02-11 20:17 ` [PATCH v2 1/4] ACPI: platform: Hide ACPI_PLATFORM_PROFILE option Maximilian Luz
2021-02-11 20:17 ` [PATCH v2 2/4] ACPI: platform: Fix file references in comment Maximilian Luz
2021-02-11 20:17 ` [PATCH v2 3/4] ACPI: platform: Add balanced-performance platform profile Maximilian Luz
2021-02-11 20:17 ` [PATCH v2 4/4] platform/surface: Add platform profile driver Maximilian Luz
2021-03-04 11:01 ` Hans de Goede [this message]
2021-02-12 15:29 ` [External] [PATCH v2 0/4] platform/surface: Add platform profile driver for Surface devices Mark Pearson
2021-02-15 14:34 ` Hans de Goede
2021-02-15 14:54 ` Rafael J. Wysocki
2021-02-15 14:56 ` Hans de Goede
2021-02-15 15:22 ` Hans de Goede
2021-02-15 15:29 ` Rafael J. Wysocki
2021-02-15 16:36 ` Hans de Goede
2021-02-15 18:40 ` Rafael J. Wysocki
2021-02-24 14:13 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b075f6f6-a947-2847-1488-762584ca3bb6@redhat.com \
--to=hdegoede@redhat.com \
--cc=jiaxun.yang@flygoat.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luzmaximilian@gmail.com \
--cc=markpearson@lenovo.com \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®