Re: [PATCH V2 2/2] arm64: dts: qcom: Add Monaco evaluation kit initial board support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 8/4/25 8:18 PM, Umang Chheda wrote:
> Hi Dmitry,
> 
> On 8/1/2025 10:44 PM, Dmitry Baryshkov wrote:
>> On Fri, Aug 01, 2025 at 10:06:07PM +0530, Umang Chheda wrote:
>>> Add initial device tree support for Monaco EVK board, based on
>>> Qualcomm's QCS8300 SoC.
>>>
>>> Implement basic features like uart/ufs to enable 'boot to shell'.
>>
>> "boot to shell" only makes sense if the platform is new and not all
>> devices are enabled in the Linux kernel. Granted by the current level of
>> the platform support, DT files for the EVK should have much more
>> features. Please submit a full DT at once.
>>
> Currently upstream aligned changes for other peripherals are not yet ready
> for this platform, hence posted base DT support, will subsequently post other patches
> when they are ready.

Dmitry refers to non-groundbreaking features, such as USB or SD Card
which are a 5 minute job to enable (since the SoC bits are in place),
mostly just requiring confirming with schematics that regulator
assignment hasn't changed versus other reference boards..

Please keep in mind that the more fragmented your changes are, the
longer it will take for them to be accepted upstream, as separate
patches carry a lot of overhead compared to what they offer.

Konrad