From: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Kumar Patro <bibek.patro@oss.qualcomm.com>,
Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
Luca Weiss <luca.weiss@fairphone.com>,
Shawn Guo <shengchao.guo@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
Abel Vesa <abel.vesa@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Subject: Re: [PATCH v6 0/5] arm64: dts: qcom: Add EL2 overlays for Shikra and SM8750
Date: Fri, 20 Nov 2026 18:59:55 +0530 [thread overview]
Message-ID: <b11f627e-4757-49fd-9f7b-de5359273e3b@oss.qualcomm.com> (raw)
In-Reply-To: <20261119-shikra-el2-v6-0-0e91a1467e79@oss.qualcomm.com>
On 11/19/2026 5:13 PM, Komal Bajaj wrote:
> Shikra EVK variants boot Linux under the Gunyah hypervisor (EL2) by
> default, with Linux running at EL1. Booting Linux directly at EL2
> requires the remote processor firmware IOMMU streams to be described
> in the DeviceTree used by Linux.
>
> Add a Shikra EL2-specific DT overlay and wire it up in the Makefile to
> generate -el2.dtb artifacts for the Shikra EVK variants alongside the
> regular DTBs.
>
> Add a similar EL2 overlay for SM8750 MTP, which also boots Linux under
> Gunyah by default.
>
> The series also moves the Qualcomm PAS remoteproc iommus constraint to
> the SoC-specific bindings and relaxes the item limit to accommodate the
> remoteproc SMMU mappings required for Shikra and SM8750 EL2 boot.
>
> Komal Bajaj (5):
> dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings
> dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints
> dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP
> arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings
> arm64: dts: qcom: sm8750: Add EL2 overlay for remoteproc SMMU mappings
>
> .../bindings/remoteproc/qcom,adsp.yaml | 6 ++++
> .../remoteproc/qcom,kaanapali-soccp-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,milos-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,nord-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,pas-common.yaml | 3 --
> .../bindings/remoteproc/qcom,qcs404-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sc7180-pas.yaml | 6 ++++
> .../remoteproc/qcom,sc8280xp-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sdx55-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,shikra-pas.yaml | 28 ++++++++++++++++
> .../bindings/remoteproc/qcom,sm6115-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm6350-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm6375-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8150-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8350-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8550-pas.yaml | 30 +++++++++++++++++
> arch/arm64/boot/dts/qcom/Makefile | 15 +++++++++
> arch/arm64/boot/dts/qcom/shikra-el2.dtso | 33 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8750-el2.dtso | 30 +++++++++++++++++
> 20 files changed, 220 insertions(+), 3 deletions(-)
>
> Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
I have addressed these comments in v7, which is available here: [PATCH
v7 0/5] arm64: dts: qcom: Add EL2 overlays for Shikra and SM8750 - Komal
Bajaj
<https://lore.kernel.org/all/20261120-shikra-el2-v7-0-9d9000eb50d4@oss.qualcomm.com/>
Thanks
Komal
> ---
> Changes in v6:
> - Define iommus with a description in the top-level properties of every
> binding referencing qcom,pas-common.yaml instead of in conditional
> blocks, making patch 1 a no functional change move (Krzysztof, Mukesh)
> - Reword the commit messages
> - Shikra: allow up to three iommus entries at the top level, require
> three for LPAICP, allow one for CDSP and disallow iommus for MPSS
> - Shikra: drop the per-item iommus descriptions
> - Add SM8750 EL2 overlay and the corresponding binding change
> - Link to v5: https://lore.kernel.org/r/20261113-shikra-el2-v5-0-8aca743de97f@oss.qualcomm.com
>
> Changes in v5:
> - Declare iommus property once in top-level properties of qcom,sa8775p-pas.yaml instead of repeating it in every allOf branch (Krzysztof, sashiko)
> - Add Glymur ADSP/CDSP compatibles to iommus conditional in qcom,sm8550-pas.yaml
> - Add sc7280 ADSP/CDSP compatibles to iommus conditional in qcom,sc7180-pas.yaml
> - Add a description for each iommus entry
> - Shikra: list three entries for LPAICP and drop the iommus property for qcom,shikra-mpss-pas (Krzysztof)
> - Link to v4: https://lore.kernel.org/r/20261104-shikra-el2-v4-0-97e7019debff@oss.qualcomm.com
>
> Changes in v4:
> - Add a patch to move the iommus constraint from qcom,pas-common.yaml to SoC-specific PAS bindings (Mukesh)
> - Add iommus constraints for all Shikra PAS compatibles instead of only relaxing the limit for LPAICP
> - Add WiFi firmware iommus to Shikra EL2 overlay
> - Link to v3: https://lore.kernel.org/r/20261005-shikra-el2-v3-0-618f7343695c@oss.qualcomm.com
>
> Changes in v3:
> - Drop qcom,pas-common reference and add per-compatible iommus limits for Shikra (Krzysztof)
> - Link to v2: https://lore.kernel.org/r/20260930-shikra-el2-v2-0-f0822be5aaee@oss.qualcomm.com
>
> Changes in v2:
> - Relax the Qualcomm PAS remoteproc `iommus` item limit, needed for Shikra EL2 remoteproc SMMU mappings.
> - Link to v1: https://lore.kernel.org/r/20260918-shikra-el2-v1-1-07bb072baa31@oss.qualcomm.com
>
> ---
> Komal Bajaj (5):
> dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings
> dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints
> dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP
> arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings
> arm64: dts: qcom: sm8750: Add EL2 overlay for remoteproc SMMU mappings
>
> .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 6 ++++
> .../remoteproc/qcom,kaanapali-soccp-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,milos-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,nord-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,pas-common.yaml | 3 --
> .../bindings/remoteproc/qcom,qcs404-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sc7180-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sc8280xp-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sdx55-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,shikra-pas.yaml | 28 ++++++++++++++++
> .../bindings/remoteproc/qcom,sm6115-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm6350-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm6375-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8150-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8350-pas.yaml | 6 ++++
> .../bindings/remoteproc/qcom,sm8550-pas.yaml | 30 +++++++++++++++++
> arch/arm64/boot/dts/qcom/Makefile | 15 +++++++++
> arch/arm64/boot/dts/qcom/shikra-el2.dtso | 38 ++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8750-el2.dtso | 30 +++++++++++++++++
> 20 files changed, 225 insertions(+), 3 deletions(-)
> ---
> base-commit: e8017d29067fd1310a65c3494ce1a1b492adbac6
> change-id: 20260918-shikra-el2-ea8969385c3c
>
> Best regards,
prev parent reply other threads:[~2026-11-20 13:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 11:43 Komal Bajaj
2026-11-19 11:43 ` [PATCH v6 1/5] dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings Komal Bajaj
2026-11-19 11:43 ` [PATCH v6 2/5] dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints Komal Bajaj
2026-11-19 11:43 ` [PATCH v6 3/5] dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP Komal Bajaj
2026-11-19 11:43 ` [PATCH v6 4/5] arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings Komal Bajaj
2026-11-19 11:43 ` [PATCH v6 5/5] arm64: dts: qcom: sm8750: " Komal Bajaj
2026-11-20 13:29 ` Komal Bajaj [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b11f627e-4757-49fd-9f7b-de5359273e3b@oss.qualcomm.com \
--to=komal.bajaj@oss.qualcomm.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=bibek.patro@oss.qualcomm.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=jingyi.wang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh@kernel.org \
--cc=shengchao.guo@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®