mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Baolu Lu <baolu.lu@linux.intel.com>
Cc: "Jörg Rödel" <joro@8bytes.org>, "Will Deacon" <will@kernel.org>,
	iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: DMAR-IR: IRQ remapping was enabled on dmar6 but we are not in kdump mode
Date: Wed, 15 May 2024 08:02:55 +0200	[thread overview]
Message-ID: <b12ae551-e7a4-435b-b7ff-368d6c1ae7a1@molgen.mpg.de> (raw)
In-Reply-To: <7eb01b85-9233-4f21-865e-6d128f39fb46@linux.intel.com>

Dear Baolu,


Am 15.05.24 um 04:13 schrieb Baolu Lu:
> On 5/15/24 3:46 AM, Paul Menzel wrote:
>> Am 23.01.24 um 01:55 schrieb Baolu Lu:
>>> On 2024/1/22 22:53, Paul Menzel wrote:
>>>> Am 22.01.24 um 13:38 schrieb Baolu Lu:
>>>>> On 2024/1/19 22:45, Paul Menzel wrote:
>>>>>>
>>>>>> On a Dell PowerEdge T640, Linux 5.9 and 6.6.12 warn about kdump:
>>>>>>
>>>>>>      [    2.728445] DMAR-IR: IRQ remapping was enabled on dmar6 but we are not in kdump mode
>>>>>>      [    2.736544] DMAR-IR: IRQ remapping was enabled on dmar5 but we are not in kdump mode
>>>>>>      [    2.744620] DMAR-IR: IRQ remapping was enabled on dmar4 but we are not in kdump mode
>>>>>>      [    2.752695] DMAR-IR: IRQ remapping was enabled on dmar3 but we are not in kdump mode
>>>>>>      [    2.760774] DMAR-IR: IRQ remapping was enabled on dmar2 but we are not in kdump mode
>>>>>>      [    2.768847] DMAR-IR: IRQ remapping was enabled on dmar1 but we are not in kdump mode
>>>>>>      [    2.776922] DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode
>>>>>>      [    2.784999] DMAR-IR: IRQ remapping was enabled on dmar7 but we are not in kdump mode
>>>>>>
>>>>>> Looking through the logs, this only happens when using kexec to 
>>>>>> restart the system.
>>>>>
>>>>> The code that warned this is,
>>>>>
>>>>>   599         if (ir_pre_enabled(iommu)) {
>>>>>   600                 if (!is_kdump_kernel()) {
>>>>>   601                         pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n",
>>>>>   602                                 iommu->name);
>>>>>   603                         clear_ir_pre_enabled(iommu);
>>>>>   604                         iommu_disable_irq_remapping(iommu);
>>>>>   605                 }
>>>>>
>>>>> The VT-d interrupt remapping is enabled during boot, but this is not a
>>>>> kdump kernel.
>>>>>
>>>>> Do you mind checking whether the disable interrupt remapping callback
>>>>> was called during kexec reboot?
>>>>>
>>>>> 1121 struct irq_remap_ops intel_irq_remap_ops = {
>>>>> 1122         .prepare                = intel_prepare_irq_remapping,
>>>>> 1123         .enable                 = intel_enable_irq_remapping,
>>>>> 1124         .disable                = disable_irq_remapping,
>>>>> 1125         .reenable               = reenable_irq_remapping,
>>>>> 1126         .enable_faulting        = enable_drhd_fault_handling,
>>>>> 1127 };
>>>>
>>>> Is there a way to check this without rebuilding the Linux kernel?
>>>
>>> I am not sure, but you can check whether any messages are dumped in the
>>> path of .disable callback? or try to use ftrace?
>>
>> With
>>
>> ```
>> diff --git a/drivers/iommu/intel/irq_remapping.c 
>> b/drivers/iommu/intel/irq_remapping.c
>> index 712ebfc9870c6..146f19ae5b5f1 100644
>> --- a/drivers/iommu/intel/irq_remapping.c
>> +++ b/drivers/iommu/intel/irq_remapping.c
>> @@ -1030,6 +1030,7 @@ static void disable_irq_remapping(void)
>>       struct dmar_drhd_unit *drhd;
>>       struct intel_iommu *iommu = NULL;
>>
>> +     pr_warn("XXX: Called %s\n", __func__);
>>       /*
>>        * Disable Interrupt-remapping for all the DRHD's now.
>>        */
>> ```
>>
>> I can’t see anything in the logs, so it does not seem to be called.
>>
>> Can you reproduce the issue?
> 
> How did you reproduce this?

On a “server” (with Intel Xeon?), in my case Dell PowerEdge T640 and 
Dell PowerEdge R930 (Intel E7-8891 v3), run

     kexec /boot/bzImage --initrd=/boot/grub/initramfs.igz --reuse-cmdline


Kind regards,

Paul

  reply	other threads:[~2024-05-15  6:03 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-19 14:45 Paul Menzel
2024-01-19 15:11 ` Jörg Rödel
2024-01-22 12:38 ` Baolu Lu
2024-01-22 14:53   ` Paul Menzel
2024-01-23  0:55     ` Baolu Lu
2024-05-14 19:46       ` Paul Menzel
2024-05-15  2:13         ` Baolu Lu
2024-05-15  6:02           ` Paul Menzel [this message]
2024-06-08 11:07             ` Paul Menzel
2024-06-09  7:30               ` Baolu Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b12ae551-e7a4-435b-b7ff-368d6c1ae7a1@molgen.mpg.de \
    --to=pmenzel@molgen.mpg.de \
    --cc=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®