mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Lyude Paul <lyude@redhat.com>
Cc: "Wim Van Sebroeck" <wim@iguana.be>,
	linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Zoltán Böszörményi" <zboszor@pr.hu>
Subject: Re: [05/12] watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
Date: Tue, 16 Jan 2018 17:28:16 -0800	[thread overview]
Message-ID: <b16fd820-fa09-67dc-abf2-94f82269571f@roeck-us.net> (raw)
In-Reply-To: <20180116202246.GC9484@roeck-us.net>

On 01/16/2018 12:22 PM, Guenter Roeck wrote:
> On Tue, Jan 16, 2018 at 02:55:57PM -0500, Lyude Paul wrote:
>> Thank you for this cleanup, the gotos that were in this code are really
>> confusing to read through! I'd recommend one very small change described
>> below. Assuming you add that in the next version:
>>
>> Reviewed-by: Lyude Paul <lyude@redhat.com>
>>
>> On Sun, 2017-12-24 at 13:04 -0800, Guenter Roeck wrote:
>>> There are too many unnecessary goto statements in sp5100_tco_setupdevice().
>>> Rearrange the code and limit goto statements to error handling.
>>>
>>> Cc: Zoltán Böszörményi <zboszor@pr.hu>
>>> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>>> ---
>>>   drivers/watchdog/sp5100_tco.c | 62 ++++++++++++++++++++------------------
>>> -----
>>>   1 file changed, 29 insertions(+), 33 deletions(-)
>>>
>>> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
>>> index 0e816f2cdb07..5a13ab483c50 100644
>>> --- a/drivers/watchdog/sp5100_tco.c
>>> +++ b/drivers/watchdog/sp5100_tco.c
>>> @@ -396,48 +396,44 @@ static int sp5100_tco_setupdevice(void)
>>>   	pr_debug("Got 0x%04x from indirect I/O\n", val);
>>>   
>>>   	/* Check MMIO address conflict */
>>> -	if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
>>> -								dev_name))
>>> -		goto setup_wdt;
>>> -	else
>>> +	if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
>>> +					  dev_name)) {
>>>   		pr_debug("MMIO address 0x%04x already in use\n", val);
>>> +		/*
>>> +		 * Secondly, Find the watchdog timer MMIO address
>>> +		 * from SBResource_MMIO register.
>>> +		 */
>>> +		if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
>>> +			/* Read SBResource_MMIO from PCI config(PCI_Reg:
>>> 9Ch) */
>>> +			pci_read_config_dword(sp5100_tco_pci,
>>> +					      SP5100_SB_RESOURCE_MMIO_BASE,
>>> +					      &val);
>>> +		} else {
>>> +			/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg:
>>> 24h) */
>>> +			val =
>>> sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
>>> +		}
>>>   
>>> -	/*
>>> -	 * Secondly, Find the watchdog timer MMIO address
>>> -	 * from SBResource_MMIO register.
>>> -	 */
>>> -	if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
>>> -		/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
>>> -		pci_read_config_dword(sp5100_tco_pci,
>>> -				      SP5100_SB_RESOURCE_MMIO_BASE, &val);
>>> -	} else {
>>> -		/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
>>> -		val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
>>> -	}
>>> -
>>> -	/* The SBResource_MMIO is enabled and mapped memory space? */
>>> -	if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) ==
>>> +		/* The SBResource_MMIO is enabled and mapped memory space?
>>> */
>>> +		if ((val & (SB800_ACPI_MMIO_DECODE_EN |
>>> SB800_ACPI_MMIO_SEL)) !=
>>>   						  SB800_ACPI_MMIO_DECODE_EN
>> Re-align this line since you're changing the code around here anyway
>>
> 
> This code is changed again in a later patch, and I don't see anything wrong
> with the final alignment. Can you look at the final code and let me know what
> alignment you would like to have changed there ?
> 

Never mind, I (think) I found what you meant: I dropped a couple of spaces
in front of SB800_ACPI_MMIO_DECODE_EN. After the last patch, this affected
two places. You are right, those spaces don't add any value.

I also see that Wim didn't pull the changes into his watchdog-next tree,
meaning they are not in linux-next and will miss 4.16 anyway. Given that,
I'll send another version of the series right after the commit window
closes.

Thanks,
Guenter

  reply	other threads:[~2018-01-17  1:28 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-24 21:04 [PATCH 00/12] watchdog: sp5100_tco: Various improvements Guenter Roeck
2017-12-24 21:04 ` [PATCH 01/12] watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG} Guenter Roeck
2017-12-24 21:04 ` [PATCH 02/12] watchdog: sp5100_tco: Fix watchdog disable bit Guenter Roeck
2017-12-24 21:04 ` [PATCH 03/12] watchdog: sp5100_tco: Use request_muxed_region where possible Guenter Roeck
2018-01-16 19:44   ` [03/12] " Lyude Paul
2018-01-16 20:16     ` Guenter Roeck
2017-12-24 21:04 ` [PATCH 04/12] watchdog: sp5100_tco: Use standard error codes Guenter Roeck
2018-01-16 19:46   ` [04/12] " Lyude Paul
2017-12-24 21:04 ` [PATCH 05/12] watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice Guenter Roeck
2018-01-16 19:55   ` [05/12] " Lyude Paul
2018-01-16 20:22     ` Guenter Roeck
2018-01-17  1:28       ` Guenter Roeck [this message]
2017-12-24 21:04 ` [PATCH 06/12] watchdog: sp5100_tco: Match PCI device early Guenter Roeck
2018-01-16 19:58   ` [06/12] " Lyude Paul
2017-12-24 21:04 ` [PATCH 07/12] watchdog: sp5100_tco: Use dev_ print functions where possible Guenter Roeck
2018-01-16 20:00   ` [07/12] " Lyude Paul
2017-12-24 21:04 ` [PATCH 08/12] watchdog: sp5100_tco: Clean up function and variable names Guenter Roeck
2018-01-16 20:05   ` [08/12] " Lyude Paul
2017-12-24 21:04 ` [PATCH 09/12] watchdog: sp5100_tco: Convert to use watchdog subsystem Guenter Roeck
2017-12-24 21:04 ` [PATCH 10/12] watchdog: sp5100_tco: Use bit operations Guenter Roeck
2017-12-24 21:04 ` [PATCH 11/12] watchdog: sp5100-tco: Abort if watchdog is disabled by hardware Guenter Roeck
2018-01-09 22:58   ` [11/12] " Lyude Paul
2018-01-09 23:37     ` Guenter Roeck
2018-01-09 23:58       ` Gabriel C
2018-01-10  0:05         ` Guenter Roeck
2018-01-10  1:26           ` Gabriel C
2018-01-10  2:09             ` Guenter Roeck
2018-01-10  2:41               ` Gabriel C
2018-01-10  5:02                 ` Guenter Roeck
2018-01-10  0:04       ` Lyude Paul
2018-01-10  0:11         ` Guenter Roeck
2018-01-10  0:30           ` Lyude Paul
2017-12-24 21:04 ` [PATCH 12/12] watchdog: sp5100_tco: Add support for recent FCH versions Guenter Roeck
     [not found]   ` <9bac4f60-e385-fef8-0a8f-7a473b079055@pr.hu>
2018-01-04 19:21     ` Guenter Roeck
2018-01-10  8:34       ` Boszormenyi Zoltan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b16fd820-fa09-67dc-abf2-94f82269571f@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=lyude@redhat.com \
    --cc=wim@iguana.be \
    --cc=zboszor@pr.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®