[RFC][PATCH v4 23/32] objtool: mcount: Remove unused file mapping

[Matt Helsley <mhelsley@vmware.com>]

The ELF data is now accessed completely through objtool's
ELF code. We can remove the mapping of the original ELF
file and propagate elf_open_read(), elf_close(), and malloc()
up in place of mmap_file(), mmap_cleanup(), and umalloc()
respectively. This also eliminates the last use of the
umalloc() wrapper, reduces the number of global
variables, and limits the use of globals to:

	The struct elf for the file we're working on. This
	saves passing it to nearly every function as a parameter.

	Variables set depending on the ELF file endian, wordsize,
	and arch so that the appropriate relocation structures,
	offset sizes, architecture quirks, and nop encodings will
	be used.

	One command-line option

Note that we're still using the recordmcount wrapper to change
variable sizes and structure definitions we use to build the
mcount relocation data and call instruction offsets.

Signed-off-by: Matt Helsley <mhelsley@vmware.com>
---
 tools/objtool/recordmcount.c | 99 +++---------------------------------
 tools/objtool/recordmcount.h |  4 +-
 2 files changed, 9 insertions(+), 94 deletions(-)

diff --git a/tools/objtool/recordmcount.c b/tools/objtool/recordmcount.c
index bfed27f53f75..5ec44c9f2884 100644
--- a/tools/objtool/recordmcount.c
+++ b/tools/objtool/recordmcount.c
@@ -41,104 +41,14 @@
 #define R_AARCH64_ABS64	257
 #endif
 
-#define R_ARM_PC24		1
 #define R_ARM_THM_CALL		10
-#define R_ARM_CALL		28
 
-static int fd_map;	/* File descriptor for file being modified. */
-static int mmap_failed; /* Boolean flag. */
 static char gpfx;	/* prefix for global symbol name (sometimes '_') */
 static const char *altmcount;	/* alternate mcount symbol name */
 extern int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
-static void *file_map;	/* pointer of the mapped file */
-static size_t file_map_size; /* original ELF file size */
 
 static struct elf *lf;
 
-static void mmap_cleanup(void)
-{
-	if (!mmap_failed)
-		munmap(file_map, file_map_size);
-	else
-		free(file_map);
-	file_map = NULL;
-	if (lf)
-		elf_close(lf);
-	lf = NULL;
-}
-
-static void * umalloc(size_t size)
-{
-	void *const addr = malloc(size);
-	if (addr == 0) {
-		fprintf(stderr, "malloc failed: %zu bytes\n", size);
-		mmap_cleanup();
-		return NULL;
-	}
-	return addr;
-}
-
-/*
- * Get the whole file as a programming convenience in order to avoid
- * malloc+lseek+read+free of many pieces.  If successful, then mmap
- * avoids copying unused pieces; else just read the whole file.
- * Open for both read and write; new info will be appended to the file.
- * Use MAP_PRIVATE so that a few changes to the in-memory ElfXX_Ehdr
- * do not propagate to the file until an explicit overwrite at the last.
- * This preserves most aspects of consistency (all except .st_size)
- * for simultaneous readers of the file while we are appending to it.
- * However, multiple writers still are bad.  We choose not to use
- * locking because it is expensive and the use case of kernel build
- * makes multiple writers unlikely.
- */
-static void *mmap_file(char const *fname)
-{
-	struct stat sb;
-
-	/* Avoid problems if early cleanup() */
-	fd_map = -1;
-	mmap_failed = 1;
-	file_map = NULL;
-	file_map_size = 0;
-
-	lf = elf_open_read(fname, O_RDWR);
-	if (!lf) {
-		perror(fname);
-		return NULL;
-	}
-	fd_map = lf->fd;
-	if (fstat(fd_map, &sb) < 0) {
-		perror(fname);
-		goto out;
-	}
-	if (!S_ISREG(sb.st_mode)) {
-		fprintf(stderr, "not a regular file: %s\n", fname);
-		goto out;
-	}
-	file_map = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
-			fd_map, 0);
-	if (file_map == MAP_FAILED) {
-		mmap_failed = 1;
-		file_map = umalloc(sb.st_size);
-		if (!file_map) {
-			perror(fname);
-			goto out;
-		}
-		if (read(fd_map, file_map, sb.st_size) != sb.st_size) {
-			perror(fname);
-			mmap_cleanup();
-			goto out;
-		}
-	} else
-		mmap_failed = 0;
-	file_map_size = sb.st_size;
-out:
-	fd_map = -1;
-
-	return file_map;
-}
-
-
 static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
 static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
 static unsigned char *ideal_nop;
@@ -525,8 +435,11 @@ static int do_file(char const *const fname)
 	unsigned int reltype = 0;
 	int rc = -1;
 
-	if (!mmap_file(fname))
+	lf = elf_open_read(fname, O_RDWR);
+	if (!lf) {
+		perror(fname);
 		goto out;
+	}
 
 	w = w4nat;
 	w2 = w2nat;
@@ -656,7 +569,9 @@ static int do_file(char const *const fname)
 	}  /* end switch */
 
 out:
-	mmap_cleanup();
+	if (lf)
+		elf_close(lf);
+	lf = NULL;
 	return rc;
 }
 
diff --git a/tools/objtool/recordmcount.h b/tools/objtool/recordmcount.h
index 352d2042be35..e1be7243742b 100644
--- a/tools/objtool/recordmcount.h
+++ b/tools/objtool/recordmcount.h
@@ -188,13 +188,13 @@ static int do_func(unsigned const reltype)
 	totrelsz = tot_relsize(&rel_entsize);
 	if (totrelsz == 0)
 		return 0;
-	mrel0 = umalloc(totrelsz);
+	mrel0 = malloc(totrelsz);
 	mrelp = mrel0;
 	if (!mrel0)
 		return -1;
 
 	/* 2*sizeof(address) <= sizeof(Elf_Rel) */
-	mloc0 = umalloc(totrelsz>>1);
+	mloc0 = malloc(totrelsz>>1);
 	mlocp = mloc0;
 	if (!mloc0) {
 		free(mrel0);
-- 
2.20.1