From: "H. Peter Anvin" <hpa@zytor.com>
To: Dave Airlie <airlied@gmail.com>, dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] vgacon/vt: clear buffer attributes when we load a 512 character font
Date: Wed, 23 Jan 2013 23:20:45 -0600 [thread overview]
Message-ID: <b2122295-0a35-4aba-90f3-8306b92af78b@email.android.com> (raw)
In-Reply-To: <1359001345-3446-1-git-send-email-airlied@gmail.com>
We should clear this bit presumably on switching either from or to 512-char mode, since the bit doesn't really make sense either way.
Dave Airlie <airlied@gmail.com> wrote:
>From: Dave Airlie <airlied@redhat.com>
>
>When we switch from 256->512 byte font rendering mode, it means the
>current contents of the screen is being reinterpreted. The bit that
>holds
>the high bit of the 9-bit font, may have been previously set, and thus
>the new font misrenders.
>
>The problem case we see is grub2 writes spaces with the bit set, so it
>ends up with data like 0x820, which gets reinterpreted into 0x120 char
>which the font translates into G with a circumflex. This flashes up on
>screen at boot and is quite ugly.
>
>A current side effect of this patch though is that any rendering on the
>screen changes color to a slightly darker color, but at least the
>screen
>no longer corrupts.
>
>Signed-off-by: Dave Airlie <airlied@redhat.com>
>---
> drivers/tty/vt/vt.c | 2 +-
> drivers/video/console/vgacon.c | 19 ++++++++++++-------
> include/linux/vt_kern.h | 1 +
> 3 files changed, 14 insertions(+), 8 deletions(-)
>
>diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
>index 8fd8968..c8067ae 100644
>--- a/drivers/tty/vt/vt.c
>+++ b/drivers/tty/vt/vt.c
>@@ -638,7 +638,7 @@ static inline void save_screen(struct vc_data *vc)
> * Redrawing of screen
> */
>
>-static void clear_buffer_attributes(struct vc_data *vc)
>+void clear_buffer_attributes(struct vc_data *vc)
> {
> unsigned short *p = (unsigned short *)vc->vc_origin;
> int count = vc->vc_screenbuf_size / 2;
>diff --git a/drivers/video/console/vgacon.c
>b/drivers/video/console/vgacon.c
>index d449a74..271b5d0 100644
>--- a/drivers/video/console/vgacon.c
>+++ b/drivers/video/console/vgacon.c
>@@ -1064,7 +1064,7 @@ static int vgacon_do_font_op(struct vgastate
>*state,char *arg,int set,int ch512)
> unsigned short video_port_status = vga_video_port_reg + 6;
> int font_select = 0x00, beg, i;
> char *charmap;
>-
>+ bool clear_attribs = false;
> if (vga_video_type != VIDEO_TYPE_EGAM) {
> charmap = (char *) VGA_MAP_MEM(colourmap, 0);
> beg = 0x0e;
>@@ -1169,12 +1169,6 @@ static int vgacon_do_font_op(struct vgastate
>*state,char *arg,int set,int ch512)
>
> /* if 512 char mode is already enabled don't re-enable it. */
> if ((set) && (ch512 != vga_512_chars)) {
>- /* attribute controller */
>- for (i = 0; i < MAX_NR_CONSOLES; i++) {
>- struct vc_data *c = vc_cons[i].d;
>- if (c && c->vc_sw == &vga_con)
>- c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
>- }
> vga_512_chars = ch512;
> /* 256-char: enable intensity bit
> 512-char: disable intensity bit */
>@@ -1185,8 +1179,19 @@ static int vgacon_do_font_op(struct vgastate
>*state,char *arg,int set,int ch512)
> it means, but it works, and it appears necessary */
> inb_p(video_port_status);
> vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
>+ clear_attribs = true;
> }
> raw_spin_unlock_irq(&vga_lock);
>+
>+ if (clear_attribs) {
>+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
>+ struct vc_data *c = vc_cons[i].d;
>+ if (c && c->vc_sw == &vga_con) {
>+ clear_buffer_attributes(c);
>+ c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
>+ }
>+ }
>+ }
> return 0;
> }
>
>diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
>index 50ae7d0..1f55665 100644
>--- a/include/linux/vt_kern.h
>+++ b/include/linux/vt_kern.h
>@@ -47,6 +47,7 @@ int con_set_cmap(unsigned char __user *cmap);
> int con_get_cmap(unsigned char __user *cmap);
> void scrollback(struct vc_data *vc, int lines);
> void scrollfront(struct vc_data *vc, int lines);
>+void clear_buffer_attributes(struct vc_data *vc);
>void update_region(struct vc_data *vc, unsigned long start, int count);
> void redraw_screen(struct vc_data *vc, int is_switch);
> #define update_screen(x) redraw_screen(x, 0)
--
Sent from my mobile phone. Please excuse brevity and lack of formatting.
next prev parent reply other threads:[~2013-01-24 5:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-24 4:22 Dave Airlie
2013-01-24 5:20 ` H. Peter Anvin [this message]
2013-01-24 8:32 ` Dave Airlie
2013-01-24 12:18 ` H. Peter Anvin
2013-01-25 2:22 ` Dave Airlie
2013-01-25 2:26 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b2122295-0a35-4aba-90f3-8306b92af78b@email.android.com \
--to=hpa@zytor.com \
--cc=airlied@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®