Re: [PATCH] arm64: dts: qcom: sc8280xp: Add missing hs_phy_irq in USB nodes

[Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>]

On 2/19/2024 1:27 PM, Krishna Kurapati wrote:
> Recent binding update [1] indicates that there are hs_phy_irq
> present in primary and secondary usb controllers of sc8280xp.
> 
> Add the missing hs_phy_irq for these controllers. Since the driver
> doesn't use this interrupt, this change has been only compile
> tested.
> 
> [1]: https://lore.kernel.org/all/20231227091951.685-2-quic_kriskura@quicinc.com/
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index a5b194813079..62e2b99915af 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3361,10 +3361,12 @@ usb_0: usb@a6f8800 {
>   			assigned-clock-rates = <19200000>, <200000000>;
>   
>   			interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
>   					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
>   					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
>   					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
>   			interrupt-names = "pwr_event",
> +					  "hs_phy_irq",
>   					  "dp_hs_phy_irq",
>   					  "dm_hs_phy_irq",
>   					  "ss_phy_irq";
> @@ -3421,10 +3423,12 @@ usb_1: usb@a8f8800 {
>   			assigned-clock-rates = <19200000>, <200000000>;
>   
>   			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
>   					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
>   					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
>   					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
>   			interrupt-names = "pwr_event",
> +					  "hs_phy_irq",
>   					  "dp_hs_phy_irq",
>   					  "dm_hs_phy_irq",
>   					  "ss_phy_irq";

Gentle ping for review.
Thanks in advance.

- Krishna