Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter <jonathanh@nvidia.com>]

Hi Peter,

On 23/02/17 10:44, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index b7ef8a7..fe698d2 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
>  	pllcx->params->defaults_set = true;
>  
>  	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
> -			PLL_ENABLE) {
> +			PLL_ENABLE && !pllcx->params->defaults_set) {
>  		/* PLL is ON: only check if defaults already set */
>  		pllcx_check_defaults(pllcx->params);
>  		pr_warn("%s already enabled. Postponing set full defaults\n",

The above hunk is causing the Tegra210 Smaug boot to fail. Looking more
at the code, I believe that the above hunk is not correct, because
'defaults_set' is always true and this is now causing us to always reset
the PLL if in-use or not. I will send a patch to correct this.

Cheers
Jon

-- 
nvpublic