Re: [PATCH v2 2/3] mmc: dw_mmc-k3: before set biu_clk rate, check biu_clk available or not

[Shawn Lin <shawn.lin@rock-chips.com>]

在 2026/02/13 星期五 11:08, ping.gao 写道:
> if biu_clk not available, shouldn't set_rate or get_rate
> 

I would rephrase something like this:
If biu_clk is not available, no need to try to set and get
rate of it, just bail out and print a warning.

> Signed-off-by: ping.gao <ping.gao@samsung.com>
> ---
>   drivers/mmc/host/dw_mmc-k3.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
> index ad6aa1aea549..9c68e162b373 100644
> --- a/drivers/mmc/host/dw_mmc-k3.c
> +++ b/drivers/mmc/host/dw_mmc-k3.c
> @@ -190,6 +190,11 @@ static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>   	int ret;
>   	unsigned int clock;
>   
> +	if (IS_ERR_OR_NULL(host->biu_clk)) {
> +		dev_warn(host->dev, "biu_clk not available\n");

dev_err(host->dev, "biu_clk is not available\n");

Should be a error for k3 driver as it needs biu_clk.

> +		return;
> +	}
> +
>   	clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
>   
>   	ret = clk_set_rate(host->biu_clk, clock);
>