[PATCH net v2 5/5] net: dsa: mt7530: serialize the regmap IRQ chip like every other user

[Daniel Golle <daniel@makrotopia.org>]

The switch register regmap is created with .disable_locking = true;
every other user in this driver calls mt7530_mutex_lock()/unlock()
around it, which takes priv->bus->mdio_lock, since the underlying
mt7530_regmap_read()/write() issue raw, unserialized bus->read()/
write() MDIO transactions.

mt7530_setup_irq() hands this same unlocked regmap straight to
devm_regmap_add_irq_chip_fwnode(), whose threaded IRQ handler then
calls regmap_read()/regmap_update_bits() on it without ever calling
mt7530_mutex_lock(). An interrupt firing while another thread is
mid-transaction on the same regmap (e.g. a paged register access, or
an indirect PHY access) can interleave with the IRQ handler's own
paged access and corrupt page selection on either side.

Use struct regmap_irq_chip's handle_mask_sync hook to call
mt7530_mutex_lock()/unlock() around the mask register write regmap-irq
issues whenever a consumer of one of the mapped sub-IRQs enables,
disables, requests or frees its line. This needs a per-device copy of
mt7530_regmap_irq_chip, since devm_regmap_add_irq_chip_fwnode() keeps
a pointer to it rather than copying it.

handle_pre_irq/handle_post_irq, which would additionally cover the
status read and ack write the threaded handler does directly, bracket
the whole handler including its handle_nested_irq() calls. Lockdep
caught this on hardware: those calls reach phy_interrupt() for the
per-port PHY IRQ lines mapped through this chip, which takes
phydev->lock, while phy_attach_direct() and this driver's own indirect
PHY access already establish the opposite order (phydev->lock, then
priv->bus->mdio_lock) elsewhere. Using them here would close that
cycle, so they are not used.

regmap_irq_sync_unlock() also has its own init_ack_masked path, used
by this chip, which unconditionally does its own regmap_write() to ack
currently-masked IRQs; that path has no per-driver hook. Together with
the threaded handler's own status read and ack write, these stay
unprotected -- a narrower, harder-to-hit gap than the recurring mask
sync above -- and will be closed once the switch regmap moves to
regmap's own locking in the driver-wide register access cleanup.

Fixes: 254f6b272e3b ("dsa: mt7530: Utilize REGMAP_IRQ for interrupt handling")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: new patch

 drivers/net/dsa/mt7530.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 29b8b28e8d2c..575eb90ce3f0 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2303,6 +2303,21 @@ static const struct regmap_irq mt7530_irqs[] = {
 	REGMAP_IRQ_REG_LINE(31, 32), /* ACL */
 };
 
+/* Serialize regmap-irq's mask sync like every other regmap user */
+static int mt7530_irq_mask_sync(int index, unsigned int mask_buf_def,
+				unsigned int mask_buf, void *irq_drv_data)
+{
+	struct mt7530_priv *priv = irq_drv_data;
+	int ret;
+
+	mt7530_mutex_lock(priv);
+	ret = regmap_update_bits(priv->regmap, MT7530_SYS_INT_EN,
+				 mask_buf_def, ~mask_buf);
+	mt7530_mutex_unlock(priv);
+
+	return ret;
+}
+
 static const struct regmap_irq_chip mt7530_regmap_irq_chip = {
 	.name = KBUILD_MODNAME,
 	.status_base = MT7530_SYS_INT_STS,
@@ -2312,12 +2327,14 @@ static const struct regmap_irq_chip mt7530_regmap_irq_chip = {
 	.irqs = mt7530_irqs,
 	.num_irqs = ARRAY_SIZE(mt7530_irqs),
 	.num_regs = 1,
+	.handle_mask_sync = mt7530_irq_mask_sync,
 };
 
 static int
 mt7530_setup_irq(struct mt7530_priv *priv)
 {
 	struct regmap_irq_chip_data *irq_data;
+	struct regmap_irq_chip *chip;
 	struct device *dev = priv->dev;
 	struct device_node *np = dev->of_node;
 	int irq, ret;
@@ -2337,10 +2354,17 @@ mt7530_setup_irq(struct mt7530_priv *priv)
 	if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
 		mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
 
+	chip = devm_kmemdup(dev, &mt7530_regmap_irq_chip, sizeof(*chip),
+			    GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->irq_drv_data = priv;
+
 	ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
 					      priv->regmap, irq,
 					      IRQF_ONESHOT,
-					      0, &mt7530_regmap_irq_chip,
+					      0, chip,
 					      &irq_data);
 	if (ret)
 		return ret;
-- 
2.55.0