Re: [PATCH 3/3] ARM: dts: qcom: msm8960: expressatt: Add camera flash

[David Heidelberg <david@ixit.cz>]

On 07/03/2026 01:58, Rudraksha Gupta via B4 Relay wrote:
> From: Rudraksha Gupta <guptarud@gmail.com>
> 
> Add camera flash support for the Samsung Galaxy Express (expressatt).
> 
> The flash IC uses a one-wire pulse-count protocol on GPIO 3, gated by
> PMIC MPP 4 which must be driven high to unlock the flash circuit.
> 
> Downstream references:
> Link: https://github.com/LineageOS/android_kernel_samsung_d2/blob/stable/cm-12.0-YNG4N/drivers/leds/Makefile#L51
> Link: https://github.com/LineageOS/android_kernel_samsung_d2/blob/stable/cm-12.0-YNG4N/arch/arm/mach-msm/board-apexq-camera.c#L591
> 
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
> ---
>   .../dts/qcom/qcom-msm8960-samsung-expressatt.dts   | 31 ++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
> index c4b98af6955d..96460775a4ec 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
> @@ -1,5 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0
>   #include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
>   #include <dt-bindings/reset/qcom,gcc-msm8960.h>
>   
>   #include "qcom-msm8960.dtsi"
> @@ -61,6 +62,20 @@ touchkey_enable: touchkey-enable {
>   		regulator-boot-on;
>   	};
>   
> +	camera_flash: led-controller {
> +		compatible = "richtek,rt8515";
> +		enf-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> +		unlock-gpios = <&pm8921_mpps 4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&cam_flash_en>;
> +

LGTM, just please order pinctrl-n before pinctrl-names :)

Reviewed-by: David Heidelberg <david@ixit.cz>

Nitpick: if you can, add phone-devel@vger.kernel.org for next time,
it's easier to distinguish the phone patches in huge linux-arm-msm pile :)

David

-- 
David Heidelberg