Re: [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver

[Gerald Loacker <gerald.loacker@wolfvision.net>]

Am 29.11.2022 um 17:37 schrieb Andy Shevchenko:
> On Tue, Nov 29, 2022 at 07:45:40AM +0100, Gerald Loacker wrote:
>> Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor.
>> Additionally to temperature and magnetic X, Y and Z-axes the angle and
>> magnitude are reported.
>> The sensor is operating in continuous measurement mode and changes to sleep
>> mode if not used for 5 seconds.
> 
> ...
> 
>> +		snprintf(data->name, sizeof(data->name), "tmag5273x%1u", data->version);
> 
> Thinking more about this format, perhaps
> 
> 		snprintf(data->name, sizeof(data->name), "tmag5273x-v%1u", data->version);
> 
> ?

I'd prefer to keep this as it's related to the orderable part number,
e.g. TMAG5273A1 / TMAG5273A2.

> 
> ...
> 
>> +static int tmag5273_runtime_resume(struct device *dev)
>> +{
>> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>> +	struct tmag5273_data *data = iio_priv(indio_dev);
>> +	int ret;
> 
>> +	/*
>> +	 * Time to go to stand-by mode from sleep mode is 50us
>> +	 * typically. During this time no I2C access is possible.
>> +	 */
> 
> Shouldn't be this comment closer to usleep_range()?
> 

Ok, I'll clarify this and also introduce a wake-up function, as this is
used two times in a similar way.

>> +	tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT);
>> +	usleep_range(80, 200);
>> +	ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT);
>> +	if (ret)
>> +		dev_err(dev, "failed to power on device (%pe)\n", ERR_PTR(ret));
>> +
>> +	return ret;
>> +}

Regards,
Gerald