From: Aboorva Devarajan <aboorvad@linux.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Shuah Khan <shuah@kernel.org>,
linux-mm@kvack.org, linux-kselftest@vger.kernel.org
Cc: Sayali Patil <sayalip@linux.ibm.com>,
linux-kernel@vger.kernel.org,
Aboorva Devarajan <aboorvad@linux.ibm.com>
Subject: [PATCH v2 2/3] selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
Date: Tue, 19 May 2026 09:36:23 +0530 [thread overview]
Message-ID: <b2fc2e80e5c0a56eb266b3744f476d8573cdc890.1779090293.git.aboorvad@linux.ibm.com> (raw)
In-Reply-To: <cover.1779090293.git.aboorvad@linux.ibm.com>
From: Sayali Patil <sayalip@linux.ibm.com>
migrate_partial_unmap_fault() and migrate_remap_fault() use
hardcoded offsets based on a 2MB PMD size. Similarly,
benchmark_thp_migration() assumes a fixed 2MB THP size when generating
test buffer sizes.
Derive offsets and test sizes from the runtime PMD page size returned
by read_pmd_pagesize(). If unavailable, fall back to TWOMEG.
This allows the tests to adapt correctly on systems where
PMD-sized THP differs from 2MB. Also replace the fixed 1MB unmap
size with a PMD-relative value derived from the runtime PMD size.
On systems with larger PMD sizes, computed test buffer sizes can exceed
INT_MAX. Skip such test cases to avoid overflow.
Fixes: 24c2c5b8ffbd ("selftests/mm/hmm-tests: partial unmap, mremap and anon_write tests")
Fixes: 271a7b2e3c13 ("selftests/mm/hmm-tests: new throughput tests including THP")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
---
tools/testing/selftests/mm/hmm-tests.c | 62 ++++++++++++++++++--------
1 file changed, 43 insertions(+), 19 deletions(-)
diff --git a/tools/testing/selftests/mm/hmm-tests.c b/tools/testing/selftests/mm/hmm-tests.c
index 3d0da4dff85bc..1d49d9e919c1f 100644
--- a/tools/testing/selftests/mm/hmm-tests.c
+++ b/tools/testing/selftests/mm/hmm-tests.c
@@ -22,6 +22,7 @@
#include <strings.h>
#include <time.h>
#include <pthread.h>
+#include <limits.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>
@@ -2334,12 +2335,21 @@ TEST_F(hmm, migrate_partial_unmap_fault)
struct hmm_buffer *buffer;
unsigned long npages;
unsigned long size = read_pmd_pagesize();
+ unsigned long unmap_size;
+ unsigned long offsets[3];
unsigned long i;
void *old_ptr;
void *map;
int *ptr;
int ret, j, use_thp;
- int offsets[] = { 0, 512 * ONEKB, ONEMEG };
+
+ if (!size)
+ size = TWOMEG;
+
+ unmap_size = size / 2;
+ offsets[0] = 0;
+ offsets[1] = size / 4;
+ offsets[2] = size / 2;
for (use_thp = 0; use_thp < 2; ++use_thp) {
for (j = 0; j < ARRAY_SIZE(offsets); ++j) {
@@ -2381,12 +2391,12 @@ TEST_F(hmm, migrate_partial_unmap_fault)
for (i = 0, ptr = buffer->mirror; i < size / sizeof(*ptr); ++i)
ASSERT_EQ(ptr[i], i);
- munmap(buffer->ptr + offsets[j], ONEMEG);
+ munmap(buffer->ptr + offsets[j], unmap_size);
/* Fault pages back to system memory and check them. */
for (i = 0, ptr = buffer->ptr; i < size / sizeof(*ptr); ++i)
if (i * sizeof(int) < offsets[j] ||
- i * sizeof(int) >= offsets[j] + ONEMEG)
+ i * sizeof(int) >= offsets[j] + unmap_size)
ASSERT_EQ(ptr[i], i);
buffer->ptr = old_ptr;
@@ -2400,12 +2410,19 @@ TEST_F(hmm, migrate_remap_fault)
struct hmm_buffer *buffer;
unsigned long npages;
unsigned long size = read_pmd_pagesize();
+ unsigned long offsets[3];
unsigned long i;
void *old_ptr, *new_ptr = NULL;
void *map;
int *ptr;
int ret, j, use_thp, dont_unmap, before;
- int offsets[] = { 0, 512 * ONEKB, ONEMEG };
+
+ if (!size)
+ size = TWOMEG;
+
+ offsets[0] = 0;
+ offsets[1] = size / 4;
+ offsets[2] = size / 2;
for (before = 0; before < 2; ++before) {
for (dont_unmap = 0; dont_unmap < 2; ++dont_unmap) {
@@ -2808,38 +2825,45 @@ static inline int run_migration_benchmark(int fd, int use_thp, size_t buffer_siz
TEST_F_TIMEOUT(hmm, benchmark_thp_migration, 120)
{
struct benchmark_results thp_results, regular_results;
- size_t thp_size = 2 * 1024 * 1024; /* 2MB - typical THP size */
+ size_t thp_size = read_pmd_pagesize();
int iterations = 5;
+ if (!thp_size)
+ thp_size = TWOMEG;
+
printf("\nHMM THP Migration Benchmark\n");
printf("---------------------------\n");
printf("System page size: %ld bytes\n", sysconf(_SC_PAGESIZE));
/* Test different buffer sizes */
size_t test_sizes[] = {
- thp_size / 4, /* 512KB - smaller than THP */
- thp_size / 2, /* 1MB - half THP */
- thp_size, /* 2MB - single THP */
- thp_size * 2, /* 4MB - two THPs */
- thp_size * 4, /* 8MB - four THPs */
- thp_size * 8, /* 16MB - eight THPs */
- thp_size * 128, /* 256MB - one twenty eight THPs */
+ thp_size / 4, /* quarter THP */
+ thp_size / 2, /* half THP */
+ thp_size, /* single THP */
+ thp_size * 2, /* two THPs */
+ thp_size * 4, /* four THPs */
+ thp_size * 8, /* eight THPs */
+ thp_size * 128, /* one twenty eight THPs */
};
static const char *const test_names[] = {
- "Small Buffer (512KB)",
- "Half THP Size (1MB)",
- "Single THP Size (2MB)",
- "Two THP Size (4MB)",
- "Four THP Size (8MB)",
- "Eight THP Size (16MB)",
- "One twenty eight THP Size (256MB)"
+ "Small Buffer",
+ "Half THP Size",
+ "Single THP Size",
+ "Two THP Size",
+ "Four THP Size",
+ "Eight THP Size",
+ "One twenty eight THP Size"
};
int num_tests = ARRAY_SIZE(test_sizes);
/* Run all tests */
for (int i = 0; i < num_tests; i++) {
+ /* Skip test sizes exceeding INT_MAX to avoid overflow */
+ if (test_sizes[i] > INT_MAX)
+ break;
+
/* Test with THP */
ASSERT_EQ(run_migration_benchmark(self->fd, 1, test_sizes[i],
iterations, &thp_results), 0);
--
2.54.0
next prev parent reply other threads:[~2026-05-19 4:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-19 4:06 [PATCH v2 0/3] selftests/mm: assorted fixes for hmm-tests Aboorva Devarajan
2026-05-19 4:06 ` [PATCH v2 1/3] selftests/mm: allow PUD-level entries in compound testcase of hmm tests Aboorva Devarajan
2026-05-19 4:06 ` Aboorva Devarajan [this message]
2026-05-19 4:06 ` [PATCH v2 3/3] selftests/mm: fix exclusive_cow test fork() handling Aboorva Devarajan
2026-05-19 18:44 ` [PATCH v2 0/3] selftests/mm: assorted fixes for hmm-tests Andrew Morton
2026-06-11 3:46 ` Aboorva Devarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b2fc2e80e5c0a56eb266b3744f476d8573cdc890.1779090293.git.aboorvad@linux.ibm.com \
--to=aboorvad@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=sayalip@linux.ibm.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®