From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752361AbdARJ7X (ORCPT <rfc822;w@1wt.eu>);
        Wed, 18 Jan 2017 04:59:23 -0500
Received: from fllnx210.ext.ti.com ([198.47.19.17]:12687 "EHLO
        fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751577AbdARJ6w (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Wed, 18 Jan 2017 04:58:52 -0500
Subject: Re: [PATCH] ARM: davinci: da850-evm: fix read access to SPI flash
To: Kevin Hilman <khilman@baylibre.com>,
        Fabien Parent <fparent@baylibre.com>
References: <20170117125742.9536-1-fparent@baylibre.com>
 <m237gh2ozw.fsf@baylibre.com>
CC: <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
        <mark.rutland@arm.com>
From: Sekhar Nori <nsekhar@ti.com>
Message-ID: <b349792e-0465-acac-5fe9-e9b4ae666ce7@ti.com>
Date: Wed, 18 Jan 2017 15:28:21 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101
 Thunderbird/45.5.1
MIME-Version: 1.0
In-Reply-To: <m237gh2ozw.fsf@baylibre.com>
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Wednesday 18 January 2017 05:55 AM, Kevin Hilman wrote:
> Fabien Parent <fparent@baylibre.com> writes:
> 
>> Read access to the SPI flash are broken on da850-evm, i.e. the data
>> read is not what is actually programmed on the flash.
>> According to the datasheet for the M25P64 part present on the da850-evm,
>> if the SPI frequency is higher than 20MHz then the READ command is not
>> usable anymore and only the FAST_READ command can be used to read data.
>>
>> This commit specifies in the DTS that we should use FAST_READ command
>> instead of the READ command.
>>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> 
> Tested on da850-evm on top of v4.10-rc3.  This gets the DT boot
> functionatliy in line with the legacy (board-file) boot.
> 
> Tested-by: Kevin Hilman <khilman@baylibre.com>

Applied with Kevin's Tested-by and also marked for stable. Sending pull
request for v4.10-rc shortly.

Thanks,
Sekhar