Re: [PATCH v1 2/2] PCI: dwc: histb: Simplify reset control handling by using reset_control_bulk*() function

[Philipp Zabel <p.zabel@pengutronix.de>]

On Di, 2025-08-26 at 17:12 +0530, Anand Moon wrote:
> Currently, the driver acquires and asserts/deasserts the resets
> individually thereby making the driver complex to read.
> 
> This can be simplified by using the reset_control_bulk() APIs.
> 
> Use devm_reset_control_bulk_get_exclusive() API to acquire all the resets
> and use reset_control_bulk_{assert/deassert}() APIs to assert/deassert them
> in bulk.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-histb.c | 57 ++++++++++++-------------
>  1 file changed, 28 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
> index 4022349e85d2..4ba5c9af63a0 100644
> --- a/drivers/pci/controller/dwc/pcie-histb.c
> +++ b/drivers/pci/controller/dwc/pcie-histb.c
> @@ -49,14 +49,20 @@
>  #define PCIE_LTSSM_STATE_MASK		GENMASK(5, 0)
>  #define PCIE_LTSSM_STATE_ACTIVE		0x11
>  
> +#define PCIE_HISTB_NUM_RESETS   ARRAY_SIZE(histb_pci_rsts)
> +
> +static const char * const histb_pci_rsts[] = {
> +	"soft",
> +	"sys",
> +	"bus",
> +};
> +
[...]
> @@ -236,14 +241,19 @@ static int histb_pcie_host_enable(struct dw_pcie_rp *pp)
>  		goto reg_dis;
>  	}
>  
> -	reset_control_assert(hipcie->soft_reset);
> -	reset_control_deassert(hipcie->soft_reset);
> -
> -	reset_control_assert(hipcie->sys_reset);
> -	reset_control_deassert(hipcie->sys_reset);
> +	ret = reset_control_bulk_assert(PCIE_HISTB_NUM_RESETS,
> +					hipcie->reset);
> +	if (ret) {
> +		dev_err(dev, "Couldn't assert reset %d\n", ret);
> +		goto reg_dis;
> +	}
>  
> -	reset_control_assert(hipcie->bus_reset);
> -	reset_control_deassert(hipcie->bus_reset);
> +	ret = reset_control_bulk_deassert(PCIE_HISTB_NUM_RESETS,

Note that this changes the order of assertion/deassertion, not only
because resets lines are now switched in bulk, but also because
reset_control_bulk_deassert() deasserts the reset lines in reverse
order. So this does

If the three resets are independent and order doesn't matter,

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp