From: Ludwig Kormann <ludwig.kormann@in-circuit.de>
To: samuel@sholland.org, jernej.skrabec@gmail.com, wens@csie.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
andre.przywara@arm.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] arm: dts: sunxi: Add ICnova A20 ADB4006 board support
Date: Thu, 20 Apr 2023 10:23:27 +0200 [thread overview]
Message-ID: <b3d0844b-201d-d591-7135-3743dcfa3413@in-circuit.de> (raw)
In-Reply-To: <b84537c0-cb58-621a-2b6d-3bbaac5091de@linaro.org>
Hi,
thanks for your review.
Am 19.04.23 um 15:05 schrieb Krzysztof Kozlowski:
> On 19/04/2023 14:12, Ludwig Kormann wrote:
>> Add board support for ICnova A20 SomPi compute module on
>> ICnova ADB4006 development board.
>>
>> Specification:
>> SoM
>> - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz
>> - 512MB DDR3 RAM
>> - Fast Ethernet (Phy: Realtek RTL8201CP)
>> ADB4006
>> - I2C
>> - 2x USB 2.0
>> - 1x Fast Ethernet port
>> - 1x SATA
>> - 2x buttons (PWRON, Boot)
>> - 2x LEDS
>> - serial console
>> - HDMI
>> - µSD-Card slot
>> - Audio Line-In / Line-Out
>> - GPIO pinheaders
>>
>> https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
>> https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
>>
>> ---
>>
>> changes in v2:
>> - use short licensing header
>> - remove deprecated elements from led nodes
>> - disable csi power supply
>> - add missing pins in usbphy node
>> - split dts into SoM dtsi and carrier board dts
>>
>> v1 of this patch was sent to the uboot mailing list [1].
>>
>> [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html
>>
>> Signed-off-by: Ludwig Kormann <ludwig.kormann@in-circuit.de>
>> ---
>> .../devicetree/bindings/arm/sunxi.yaml | 6 +
> Bindings are always separate patches. checkpatch did not complain?
>
I just ran checkpatch.pl, you're right, it does complain. I will move
the bindings to a seperate patch.
>> arch/arm/boot/dts/Makefile | 1 +
>> .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++
>> arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi | 63 ++++++++
>> 4 files changed, 207 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>>
>> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml
>> b/Documentation/devicetree/bindings/arm/sunxi.yaml
>> index 013821f4a7b8..12f0c236f17b 100644
>> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
>> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
>> @@ -305,6 +305,12 @@ properties:
>> - const: allwinner,i12-tvbox
>> - const: allwinner,sun7i-a20
>> + - description: ICNova A20 ADB4006
>> + items:
>> + - const: incircuit,icnova-a20-adb4006
>> + - const: incircuit,icnova-a20
>> + - const: allwinner,sun7i-a20
>> +
>> - description: ICNova A20 SWAC
>> items:
>> - const: incircuit,icnova-a20-swac
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 3cc32722c394..b6b408417261 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1321,6 +1321,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-hummingbird.dtb \
>> sun7i-a20-itead-ibox.dtb \
>> sun7i-a20-i12-tvbox.dtb \
>> + sun7i-a20-icnova-a20-adb4006.dtb \
>> sun7i-a20-icnova-swac.dtb \
>> sun7i-a20-lamobo-r1.dtb \
>> sun7i-a20-linutronix-testbox-v2.dtb \
>> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> new file mode 100644
>> index 000000000000..c1606c085e4e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> @@ -0,0 +1,137 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> Unusual license. Are you sure you are ok with GPLv5.0?
Thanks for the hint. I will remove the '+' and update the licensing to
"GPL-2.0 OR MIT".
>
> Also, at the end of your files - drop stray blank lines.
I will remove them.
I will implement the changes and provide patch series v3.
kind regards,
Ludwig
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2023-04-20 8:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-19 12:12 Ludwig Kormann
2023-04-19 13:05 ` Krzysztof Kozlowski
2023-04-20 8:23 ` Ludwig Kormann [this message]
2023-04-20 8:53 ` Andre Przywara
2023-04-20 12:53 ` Krzysztof Kozlowski
2023-04-20 8:57 ` Andre Przywara
2023-04-20 9:22 ` Ludwig Kormann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b3d0844b-201d-d591-7135-3743dcfa3413@in-circuit.de \
--to=ludwig.kormann@in-circuit.de \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®