Re: [PATCH V2 4/4] arm64: dts: qcom: ipq5018: Add tsens node

[Sricharan Ramabadhran <quic_srichara@quicinc.com>]

On 9/15/2023 6:16 PM, Krzysztof Kozlowski wrote:
> On 15/09/2023 14:15, Sricharan Ramabadhran wrote:
>> IPQ5018 has tsens V1.0 IP with 4 sensors.
>> There is no RPM, so tsens has to be manually enabled. Adding the tsens
>> and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the
>> critical temperature being 120'C and action is to reboot. Adding all
>> the 4 zones here.
>>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   [v2] Fixed node names, order and added qfprom cells for points
>>        seperately to use the calibrate_common and squashed thermal_zone
>>        nodes here
>>
>>   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++
>>   1 file changed, 169 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> index 9f13d2dcdfd5..d53aea5342e2 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> @@ -93,6 +93,117 @@ soc: soc@0 {
>>   		#size-cells = <1>;
>>   		ranges = <0 0 0 0xffffffff>;
>>   
>> +		qfprom: qfprom@a0000 {
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> 
> This is a friendly reminder during the review process.
> 
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
> 

  oops, moved the compatible to first, but missed it on posting version.
  Will fix it in V3.

Regards,
  Sricharan