From: Nikolay Borisov <nborisov@suse.com>
To: Allen Pais <allen.lkml@gmail.com>, linux-btrfs@vger.kernel.org
Cc: clm@fb.com, jbackik@fb.com, dsterba@suse.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] btrfs: stop using get_seconds()
Date: Tue, 19 Jun 2018 16:07:21 +0300 [thread overview]
Message-ID: <b40f794f-16b6-0369-cb0d-bbb5b12aa46a@suse.com> (raw)
In-Reply-To: <1528804105-24100-1-git-send-email-allen.lkml@gmail.com>
On 12.06.2018 14:48, Allen Pais wrote:
> The get_seconds() function is deprecated as it truncates
> the timestamp to 32 bits. Change to either ktime_get_seconds()
> or ktime_get_real_seconds()
nit: In your patch you are only changing them to get-real-seconds. So
the "ktime_get_seconds() or" part of the changelog is unnecessary.
>
> Signed-off-by: Allen Pais <allen.lkml@gmail.com>
> ---
> fs/btrfs/ctree.h | 4 ++--
> fs/btrfs/dev-replace.c | 8 ++++----
> fs/btrfs/disk-io.c | 4 ++--
> fs/btrfs/transaction.c | 2 +-
> fs/btrfs/transaction.h | 2 +-
> 5 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
> index 118346a..e671a1f 100644
> --- a/fs/btrfs/ctree.h
> +++ b/fs/btrfs/ctree.h
> @@ -342,8 +342,8 @@ struct btrfs_path {
> sizeof(struct btrfs_item))
> struct btrfs_dev_replace {
> u64 replace_state; /* see #define above */
> - u64 time_started; /* seconds since 1-Jan-1970 */
> - u64 time_stopped; /* seconds since 1-Jan-1970 */
> + time64_t time_started; /* seconds since 1-Jan-1970 */
> + time64_t time_stopped; /* seconds since 1-Jan-1970 */
> atomic64_t num_write_errors;
> atomic64_t num_uncorrectable_read_errors;
>
> diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
> index e2ba041..1b30c38 100644
> --- a/fs/btrfs/dev-replace.c
> +++ b/fs/btrfs/dev-replace.c
> @@ -465,7 +465,7 @@ int btrfs_dev_replace_start(struct btrfs_fs_info *fs_info,
> * go to the tgtdev as well (refer to btrfs_map_block()).
> */
> dev_replace->replace_state = BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED;
> - dev_replace->time_started = get_seconds();
> + dev_replace->time_started = ktime_get_real_seconds();
> dev_replace->cursor_left = 0;
> dev_replace->committed_cursor_left = 0;
> dev_replace->cursor_left_last_write_of_item = 0;
> @@ -618,7 +618,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
> : BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED;
> dev_replace->tgtdev = NULL;
> dev_replace->srcdev = NULL;
> - dev_replace->time_stopped = get_seconds();
> + dev_replace->time_stopped = ktime_get_real_seconds();
> dev_replace->item_needs_writeback = 1;
>
> /* replace old device with new one in mapping tree */
> @@ -807,7 +807,7 @@ int btrfs_dev_replace_cancel(struct btrfs_fs_info *fs_info)
> break;
> }
> dev_replace->replace_state = BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED;
> - dev_replace->time_stopped = get_seconds();
> + dev_replace->time_stopped = ktime_get_real_seconds();
> dev_replace->item_needs_writeback = 1;
> btrfs_dev_replace_write_unlock(dev_replace);
> btrfs_scrub_cancel(fs_info);
> @@ -848,7 +848,7 @@ void btrfs_dev_replace_suspend_for_unmount(struct btrfs_fs_info *fs_info)
> case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
> dev_replace->replace_state =
> BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED;
> - dev_replace->time_stopped = get_seconds();
> + dev_replace->time_stopped = ktime_get_real_seconds();
> dev_replace->item_needs_writeback = 1;
> btrfs_info(fs_info, "suspending dev_replace for unmount");
> break;
> diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
> index 205092d..f3224e2 100644
> --- a/fs/btrfs/disk-io.c
> +++ b/fs/btrfs/disk-io.c
> @@ -1803,7 +1803,7 @@ static int transaction_kthread(void *arg)
> struct btrfs_trans_handle *trans;
> struct btrfs_transaction *cur;
> u64 transid;
> - unsigned long now;
> + time64_t now;
> unsigned long delay;
> bool cannot_commit;
>
> @@ -1819,7 +1819,7 @@ static int transaction_kthread(void *arg)
> goto sleep;
> }
>
> - now = get_seconds();
> + now = ktime_get_real_seconds();
> if (cur->state < TRANS_STATE_BLOCKED &&
> !test_bit(BTRFS_FS_NEED_ASYNC_COMMIT, &fs_info->flags) &&
> (now < cur->start_time ||
> diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
> index ff5f6c7..56c8bab 100644
> --- a/fs/btrfs/transaction.c
> +++ b/fs/btrfs/transaction.c
> @@ -241,7 +241,7 @@ static noinline int join_transaction(struct btrfs_fs_info *fs_info,
> refcount_set(&cur_trans->use_count, 2);
> atomic_set(&cur_trans->pending_ordered, 0);
> cur_trans->flags = 0;
> - cur_trans->start_time = get_seconds();
> + cur_trans->start_time = ktime_get_real_seconds();
>
> memset(&cur_trans->delayed_refs, 0, sizeof(cur_trans->delayed_refs));
>
> diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
> index 9443948..4cbb1b5 100644
> --- a/fs/btrfs/transaction.h
> +++ b/fs/btrfs/transaction.h
> @@ -48,7 +48,7 @@ struct btrfs_transaction {
> int aborted;
> struct list_head list;
> struct extent_io_tree dirty_pages;
> - unsigned long start_time;
> + time64_t start_time;
> wait_queue_head_t writer_wait;
> wait_queue_head_t commit_wait;
> wait_queue_head_t pending_wait;
>
next prev parent reply other threads:[~2018-06-19 13:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 11:48 Allen Pais
2018-06-19 12:59 ` David Sterba
2018-06-19 13:07 ` Nikolay Borisov [this message]
2018-06-19 13:10 ` David Sterba
2018-06-20 3:21 ` Allen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b40f794f-16b6-0369-cb0d-bbb5b12aa46a@suse.com \
--to=nborisov@suse.com \
--cc=allen.lkml@gmail.com \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=jbackik@fb.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®