mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	mark.rutland@arm.com, sboyd@codeaurora.org
Subject: [PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access
Date: Fri, 29 Jan 2016 14:57:04 +0000	[thread overview]
Message-ID: <b4ccba950f8fe0433b8e258a1fc0b8977bbe82d5.1454079150.git.robin.murphy@arm.com> (raw)

So far, we have been blindly assuming that if a memory-mapped timer
frame exists, then we have access to it. Whilst it's the firmware's
job to give us non-secure access to frames in the first place, we
should not rely on it always being generous enough to also configure
CNTACR if it's not even using those frames itself.

Explicitly enable feature-level access per-frame, and verify that the
access we want is really implemented before trying to make use of it.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 drivers/clocksource/arm_arch_timer.c | 39 ++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index c64d543..c88485d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -32,6 +32,14 @@
 #define CNTTIDR		0x08
 #define CNTTIDR_VIRT(n)	(BIT(1) << ((n) * 4))
 
+#define CNTACR(n)	(0x40 + ((n) * 4))
+#define CNTACR_RPCT	BIT(0)
+#define CNTACR_RVCT	BIT(1)
+#define CNTACR_RFRQ	BIT(2)
+#define CNTACR_RVOFF	BIT(3)
+#define CNTACR_RWVT	BIT(4)
+#define CNTACR_RWPT	BIT(5)
+
 #define CNTVCT_LO	0x08
 #define CNTVCT_HI	0x0c
 #define CNTFRQ		0x10
@@ -757,7 +765,6 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	}
 
 	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
-	iounmap(cntctlbase);
 
 	/*
 	 * Try to find a virtual capable frame. Otherwise fall back to a
@@ -765,20 +772,34 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	 */
 	for_each_available_child_of_node(np, frame) {
 		int n;
+		u32 cntacr;
 
 		if (of_property_read_u32(frame, "frame-number", &n)) {
 			pr_err("arch_timer: Missing frame-number\n");
-			of_node_put(best_frame);
 			of_node_put(frame);
-			return;
+			goto out;
 		}
 
-		if (cnttidr & CNTTIDR_VIRT(n)) {
+		/* Try enabling everything, and see what sticks */
+		cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+			 CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+		writel_relaxed(cntacr, cntctlbase + CNTACR(n));
+		cntacr = readl_relaxed(cntctlbase + CNTACR(n));
+
+		if (~cntacr & CNTACR_RFRQ)
+			continue;
+
+		if ((cnttidr & CNTTIDR_VIRT(n)) &&
+		    !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
 			of_node_put(best_frame);
 			best_frame = frame;
 			arch_timer_mem_use_virtual = true;
 			break;
 		}
+
+		if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+			continue;
+
 		of_node_put(best_frame);
 		best_frame = of_node_get(frame);
 	}
@@ -786,24 +807,26 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	base = arch_counter_base = of_iomap(best_frame, 0);
 	if (!base) {
 		pr_err("arch_timer: Can't map frame's registers\n");
-		of_node_put(best_frame);
-		return;
+		goto out;
 	}
 
 	if (arch_timer_mem_use_virtual)
 		irq = irq_of_parse_and_map(best_frame, 1);
 	else
 		irq = irq_of_parse_and_map(best_frame, 0);
-	of_node_put(best_frame);
+
 	if (!irq) {
 		pr_err("arch_timer: Frame missing %s irq",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
-		return;
+		goto out;
 	}
 
 	arch_timer_detect_rate(base, np);
 	arch_timer_mem_register(base, irq);
 	arch_timer_common_init();
+out:
+	iounmap(cntctlbase);
+	of_node_put(best_frame);
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
-- 
2.7.0.25.gfc10eb5.dirty

             reply	other threads:[~2016-01-29 14:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29 14:57 Robin Murphy [this message]
2016-01-29 18:30 ` Stephen Boyd
2016-01-29 19:44   ` Robin Murphy
2016-01-29 20:04     ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b4ccba950f8fe0433b8e258a1fc0b8977bbe82d5.1454079150.git.robin.murphy@arm.com \
    --to=robin.murphy@arm.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=sboyd@codeaurora.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®