From: Neil Armstrong <neil.armstrong@linaro.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 3/6] arm64: dts: qcom: sm8550: Add GPU nodes
Date: Mon, 4 Dec 2023 13:57:03 +0100 [thread overview]
Message-ID: <b52212f4-39a9-474c-87ea-72f6d08a8388@linaro.org> (raw)
In-Reply-To: <20231127-topic-a7xx_dt-v2-3-2a437588e563@linaro.org>
On 04/12/2023 13:55, Konrad Dybcio wrote:
> Add the required nodes to support the A740 GPU.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 166 +++++++++++++++++++++++++++++++++++
> 1 file changed, 166 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 7bafb3d88d69..8f59085c804d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1984,6 +1984,128 @@ tcsr: clock-controller@1fc0000 {
> #reset-cells = <1>;
> };
>
> + gpu: gpu@3d00000 {
> + compatible = "qcom,adreno-43050a01", "qcom,adreno";
> + reg = <0x0 0x03d00000 0x0 0x40000>,
> + <0x0 0x03d9e000 0x0 0x1000>,
> + <0x0 0x03d61000 0x0 0x800>;
> + reg-names = "kgsl_3d0_reg_memory",
> + "cx_mem",
> + "cx_dbgc";
> +
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> + iommus = <&adreno_smmu 0 0x0>,
> + <&adreno_smmu 1 0x0>;
> +
> + operating-points-v2 = <&gpu_opp_table>;
> +
> + qcom,gmu = <&gmu>;
> +
> + status = "disabled";
> +
> + zap-shader {
> + memory-region = <&gpu_micro_code_mem>;
> + };
> +
> + /* Speedbin needs more work on A740+, keep only lower freqs */
> + gpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-680000000 {
> + opp-hz = /bits/ 64 <680000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + opp-615000000 {
> + opp-hz = /bits/ 64 <615000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
> + };
> +
> + opp-550000000 {
> + opp-hz = /bits/ 64 <550000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + opp-475000000 {
> + opp-hz = /bits/ 64 <475000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
> + };
> +
> + opp-401000000 {
> + opp-hz = /bits/ 64 <401000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + opp-348000000 {
> + opp-hz = /bits/ 64 <348000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
> + };
> +
> + opp-295000000 {
> + opp-hz = /bits/ 64 <295000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> + };
> +
> + opp-220000000 {
> + opp-hz = /bits/ 64 <220000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
> + };
> + };
> + };
> +
> + gmu: gmu@3d6a000 {
> + compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
> + reg = <0x0 0x03d6a000 0x0 0x35000>,
> + <0x0 0x03d50000 0x0 0x10000>,
> + <0x0 0x0b280000 0x0 0x10000>;
> + reg-names = "gmu", "rscc", "gmu_pdc";
> +
> + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hfi", "gmu";
> +
> + clocks = <&gpucc GPU_CC_AHB_CLK>,
> + <&gpucc GPU_CC_CX_GMU_CLK>,
> + <&gpucc GPU_CC_CXO_CLK>,
> + <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> + <&gpucc GPU_CC_DEMET_CLK>;
> + clock-names = "ahb",
> + "gmu",
> + "cxo",
> + "axi",
> + "memnoc",
> + "hub",
> + "demet";
> +
> + power-domains = <&gpucc GPU_CC_CX_GDSC>,
> + <&gpucc GPU_CC_GX_GDSC>;
> + power-domain-names = "cx",
> + "gx";
> +
> + iommus = <&adreno_smmu 5 0x0>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + operating-points-v2 = <&gmu_opp_table>;
> +
> + gmu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> + };
> + };
> +
> gpucc: clock-controller@3d90000 {
> compatible = "qcom,sm8550-gpucc";
> reg = <0 0x03d90000 0 0xa000>;
> @@ -1995,6 +2117,50 @@ gpucc: clock-controller@3d90000 {
> #power-domain-cells = <1>;
> };
>
> + adreno_smmu: iommu@3da0000 {
> + compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
> + "qcom,smmu-500", "arm,mmu-500";
> + reg = <0x0 0x03da0000 0x0 0x40000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
> + <&gpucc GPU_CC_AHB_CLK>;
> + clock-names = "hlos",
> + "bus",
> + "iface",
> + "ahb";
> + power-domains = <&gpucc GPU_CC_CX_GDSC>;
> + dma-coherent;
> + };
> +
> remoteproc_mpss: remoteproc@4080000 {
> compatible = "qcom,sm8550-mpss-pas";
> reg = <0x0 0x04080000 0x0 0x4040>;
>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
next prev parent reply other threads:[~2023-12-04 12:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-04 12:55 [PATCH v2 0/6] SM8450 / SM8550 Adreno Konrad Dybcio
2023-12-04 12:55 ` [PATCH v2 1/6] dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU Konrad Dybcio
2023-12-04 12:55 ` [PATCH v2 2/6] arm64: dts: qcom: sm8450: Add GPU nodes Konrad Dybcio
2023-12-04 12:55 ` [PATCH v2 3/6] arm64: dts: qcom: sm8550: " Konrad Dybcio
2023-12-04 12:57 ` Neil Armstrong [this message]
2023-12-04 12:55 ` [PATCH v2 4/6] arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU Konrad Dybcio
2023-12-04 12:56 ` Neil Armstrong
2023-12-04 12:55 ` [PATCH v2 5/6] arm64: dts: qcom: sm8550-mtp: " Konrad Dybcio
2023-12-04 12:55 ` [PATCH v2 6/6] arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU Konrad Dybcio
2023-12-12 17:20 ` [PATCH v2 0/6] SM8450 / SM8550 Adreno Will Deacon
2023-12-17 17:21 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b52212f4-39a9-474c-87ea-72f6d08a8388@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®