mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joseph Qi <joseph.qi@linux.alibaba.com>
To: Jiale Yao <yaojiale02@163.com>
Cc: Mark Fasheh <mark@fasheh.com>, Joel Becker <jlbec@evilplan.org>,
	Gang He <ghe@suse.com>, Andrew Morton <akpm@linux-foundation.org>,
	Heming Zhao <heming.zhao@suse.com>,
	ocfs2-devel@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] ocfs2: validate filecheck inode slots
Date: Thu, 8 Oct 2026 20:59:05 +0800	[thread overview]
Message-ID: <b5773b48-d9be-4789-845b-a8d94a701fa5@linux.alibaba.com> (raw)
In-Reply-To: <20261004070621.1514598-1-yaojiale02@163.com>



On 10/4/26 3:06 PM, Jiale Yao wrote:
> The online filecheck path reads inodes with
> ocfs2_filecheck_validate_inode_block() instead of
> ocfs2_validate_inode_block(). It does not check the slot fields used by
> ocfs2_get_system_file_inode() to index slot-local system inodes.
> 
> A corrupted dinode can set OCFS2_ORPHANED_FL or
> OCFS2_DIO_ORPHANED_FL while carrying an out-of-range orphan slot. An
> out-of-range i_suballoc_slot can also bypass the normal validator through
> the filecheck path. These values can later cause an out-of-bounds access
> when used as slot indices.
> 
> Share predicate helpers between the normal and filecheck validators so
> both paths enforce the same bounds while retaining their own logging and
> error handling. Reject invalid slots in the repair path as well, since the
> correct slot cannot be recovered.
> 
> This was reproduced on Linux 7.3-rc4 in an x86_64 QEMU guest with KASAN.
> Online filecheck of a corrupted inode reported a slab-out-of-bounds read
> in ocfs2_evict_inode(), reached from ocfs2_filecheck_attr_store().
> 
> Fixes: d56a8f32e4c6 ("ocfs2: check/fix inode block for online file check")
> Signed-off-by: Jiale Yao <yaojiale02@163.com>
> ---
> 
> Notes:
>     Changes in v2:
>     - Extract the slot validity conditions from ocfs2_validate_inode_block()
>       into predicates shared with the filecheck paths.
>     - Keep logging and error handling local to each validator.
>     - Fix the Fixes tag and include the KASAN reproduction information.
> 
>  fs/ocfs2/inode.c | 68 +++++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 62 insertions(+), 6 deletions(-)
> 
> diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
> index 180107a11046..e5a7e53fffe5 100644
> --- a/fs/ocfs2/inode.c
> +++ b/fs/ocfs2/inode.c
> @@ -249,6 +249,33 @@ static int ocfs2_dinode_has_extents(struct ocfs2_dinode *di)
>  	return 1;
>  }
>  
> +static int
> +ocfs2_dinode_has_invalid_suballoc_slot(struct super_block *sb,
> +				       struct ocfs2_dinode *di)
> +{
> +	u16 slot = le16_to_cpu(di->i_suballoc_slot);
> +
> +	return slot != (u16)OCFS2_INVALID_SLOT &&
> +	       slot >= OCFS2_SB(sb)->max_slots;
> +}

Use 'static bool' instead, to keep consistent with
ocfs2_dinode_has_size_without_clusters().

And it seems your another patch also changes the same context, so please
send the two together as a series.

BTW, you should rebase on top of the latest linux-next. This conflicts
with the series of 25bf9e549360 ("ocfs2: restrict OCFS2_INVALID_SLOT
suballoc slot to system inodes"), and you have to teach the helper about
OCFS2_SYSTEM_FL.

Thanks,
Joseph

> +
> +static int
> +ocfs2_dinode_has_invalid_orphan_slot(struct super_block *sb,
> +				     struct ocfs2_dinode *di)
> +{
> +	return (le32_to_cpu(di->i_flags) & OCFS2_ORPHANED_FL) &&
> +	       le16_to_cpu(di->i_orphaned_slot) >= OCFS2_SB(sb)->max_slots;
> +}
> +
> +static int
> +ocfs2_dinode_has_invalid_dio_orphan_slot(struct super_block *sb,
> +					 struct ocfs2_dinode *di)
> +{
> +	return (le32_to_cpu(di->i_flags) & OCFS2_DIO_ORPHANED_FL) &&
> +	       le16_to_cpu(di->i_dio_orphaned_slot) >=
> +	       OCFS2_SB(sb)->max_slots;
> +}
> +
>  /*
>   * here's how inodes get read from disk:
>   * iget5_locked -> find_actor -> OCFS2_FIND_ACTOR
> @@ -1520,24 +1547,21 @@ int ocfs2_validate_inode_block(struct super_block *sb,
>  		goto bail;
>  	}
>  
> -	if (le16_to_cpu(di->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
> -	    (u32)le16_to_cpu(di->i_suballoc_slot) > OCFS2_SB(sb)->max_slots - 1) {
> +	if (ocfs2_dinode_has_invalid_suballoc_slot(sb, di)) {
>  		rc = ocfs2_error(sb, "Invalid dinode %llu: suballoc slot %u\n",
>  				 (unsigned long long)bh->b_blocknr,
>  				 le16_to_cpu(di->i_suballoc_slot));
>  		goto bail;
>  	}
>  
> -	if ((le32_to_cpu(di->i_flags) & OCFS2_ORPHANED_FL) &&
> -	    le16_to_cpu(di->i_orphaned_slot) >= OCFS2_SB(sb)->max_slots) {
> +	if (ocfs2_dinode_has_invalid_orphan_slot(sb, di)) {
>  		rc = ocfs2_error(sb, "Invalid dinode %llu: orphaned slot %u\n",
>  				 (unsigned long long)bh->b_blocknr,
>  				 le16_to_cpu(di->i_orphaned_slot));
>  		goto bail;
>  	}
>  
> -	if ((le32_to_cpu(di->i_flags) & OCFS2_DIO_ORPHANED_FL) &&
> -	    le16_to_cpu(di->i_dio_orphaned_slot) >= OCFS2_SB(sb)->max_slots) {
> +	if (ocfs2_dinode_has_invalid_dio_orphan_slot(sb, di)) {
>  		rc = ocfs2_error(sb, "Invalid dinode %llu: DIO orphaned slot %u\n",
>  				 (unsigned long long)bh->b_blocknr,
>  				 le16_to_cpu(di->i_dio_orphaned_slot));
> @@ -1835,6 +1859,33 @@ static int ocfs2_filecheck_validate_inode_block(struct super_block *sb,
>  		goto bail;
>  	}
>  
> +	if (ocfs2_dinode_has_invalid_suballoc_slot(sb, di)) {
> +		mlog(ML_ERROR,
> +		     "Filecheck: invalid dinode #%llu: suballoc slot %u\n",
> +		     (unsigned long long)bh->b_blocknr,
> +		     le16_to_cpu(di->i_suballoc_slot));
> +		rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
> +		goto bail;
> +	}
> +
> +	if (ocfs2_dinode_has_invalid_orphan_slot(sb, di)) {
> +		mlog(ML_ERROR,
> +		     "Filecheck: invalid dinode #%llu: orphaned slot %u\n",
> +		     (unsigned long long)bh->b_blocknr,
> +		     le16_to_cpu(di->i_orphaned_slot));
> +		rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
> +		goto bail;
> +	}
> +
> +	if (ocfs2_dinode_has_invalid_dio_orphan_slot(sb, di)) {
> +		mlog(ML_ERROR,
> +		     "Filecheck: invalid dinode #%llu: DIO orphaned slot %u\n",
> +		     (unsigned long long)bh->b_blocknr,
> +		     le16_to_cpu(di->i_dio_orphaned_slot));
> +		rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
> +		goto bail;
> +	}
> +
>  	if (ocfs2_dinode_has_size_without_clusters(sb, di)) {
>  		if (S_ISDIR(le16_to_cpu(di->i_mode)))
>  			mlog(ML_ERROR,
> @@ -1893,6 +1944,11 @@ static int ocfs2_filecheck_repair_inode_block(struct super_block *sb,
>  		return -OCFS2_FILECHECK_ERR_VALIDFLAG;
>  	}
>  
> +	if (ocfs2_dinode_has_invalid_suballoc_slot(sb, di) ||
> +	    ocfs2_dinode_has_invalid_orphan_slot(sb, di) ||
> +	    ocfs2_dinode_has_invalid_dio_orphan_slot(sb, di))
> +		return -OCFS2_FILECHECK_ERR_INVALIDINO;
> +
>  	if (le64_to_cpu(di->i_blkno) != bh->b_blocknr) {
>  		di->i_blkno = cpu_to_le64(bh->b_blocknr);
>  		changed = 1;


      reply	other threads:[~2026-10-08 12:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04  7:06 Jiale Yao
2026-10-08 12:59 ` Joseph Qi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b5773b48-d9be-4789-845b-a8d94a701fa5@linux.alibaba.com \
    --to=joseph.qi@linux.alibaba.com \
    --cc=akpm@linux-foundation.org \
    --cc=ghe@suse.com \
    --cc=heming.zhao@suse.com \
    --cc=jlbec@evilplan.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark@fasheh.com \
    --cc=ocfs2-devel@lists.linux.dev \
    --cc=yaojiale02@163.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®