Hi Jonathan,

On Mon, 2026-09-07 at 02:54 +0100, Jonathan Cameron wrote:
> > Expose IIO_CHAN_INFO_CALIBBIAS on the accelerometer channels. The
> > registers are stored in MREG1, which can be accessed by the
> > mreg_read
> > and mreg_write routines. The calibration bias is written to
> > OFFSET_USER4
> > to OFFSET_USER8 registers in MREG1.
> > 
> > Note: The accelerometer functionality is tested with Invensense,
> > ICM42370-P development board.
> > 
> > Datasheet:
> > https://www.invensense.tdk.com/en-us/products/3-axis/icm-42370-p
> > Datasheet: https://www.lcsc.com/product-detail/C5129967.html
> > Signed-off-by: Kanak Shilledar <kanak.shilledar@axis.com>
> 
> Various things inline.
> 
> Thanks
> 
> Jonathan

I will fix these issues.
Thanks and Regards,
Kanak Shilledar