Re: [PATCH] dmaengine: tegra186: Fix residual calculation

[Jon Hunter <jonathanh@nvidia.com>]

On 29/02/2024 06:52, Akhil R wrote:
> The exisiting residual calculation returns an incorrect value when

s/exisiting/existing/

> bytes_xfer == bytes_req. This scenario occurs particularly with
> drivers like UART where DMA is scheduled for maximum number of bytes and
> is terminated when the bytes inflow stops. At higher baud rates, it
> could request the tx_status while there is no bytes left to transfer.
> This will lead to incorrect residual being set. Hence return residual as
> '0' when bytes transferred equals to the bytes requested.
> 
> Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> ---
>   drivers/dma/tegra186-gpc-dma.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/dma/tegra186-gpc-dma.c b/drivers/dma/tegra186-gpc-dma.c
> index 88547a23825b..3642508e88bb 100644
> --- a/drivers/dma/tegra186-gpc-dma.c
> +++ b/drivers/dma/tegra186-gpc-dma.c
> @@ -746,6 +746,9 @@ static int tegra_dma_get_residual(struct tegra_dma_channel *tdc)
>   	bytes_xfer = dma_desc->bytes_xfer +
>   		     sg_req[dma_desc->sg_idx].len - (wcount * 4);
>   
> +	if (dma_desc->bytes_req == bytes_xfer)
> +		return 0;
> +
>   	residual = dma_desc->bytes_req - (bytes_xfer % dma_desc->bytes_req);
>   
>   	return residual;


Thanks! Apart from the typo, looks good to me ...

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>

Jon

-- 
nvpublic