Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller

[Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>]

> Krishna, when you make v2 can you update the wording about the USB 2.0
> mux? Maybe something like "which by default on boot is selected to mux
> to the external port on the board (with the other option being a test
> point)." instead of the wording I originally had? That way the
> information Dmitry requested here is easily accessible in the future.
> 
>>
>>>

[...]

>>>>>>    };
>>>>>
>>>>> Isn't gpio-hog the preferred way to describe that ?
>>>>
>>>> That depends. As this pinctrl describes board configuration, I'd agree
>>>> with Neil.
>>>
>>> I unfortunately don't have the experience with gpio-hog to weigh in
>>> here, but wouldn't be opposed to Krishna switching it if that's what's
>>> recommended for this type of thing.
>>
>> Quoting gpio.txt:
>>
>> The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
>> providing automatic GPIO request and configuration as part of the
>> gpio-controller's driver probe function.
>>
>> See sdm845-pinctrl.yaml for an example of the gpio-hog node.
> 
> Thanks, that seems like the way to go. Krishna please take note of this
> for v2!
> 

Hi Andrew,

  Can you help test the following patch. It is just an add-on to your 
original one. I don't have a SA8540P Ride at the moment and getting one 
might take time. Incase you can confirm this patch is working. I can 
push v2 of this series.


diff --git 
a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml 
b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index ed344deaf8b9..aa42ac5a3197 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -36,6 +36,10 @@ patternProperties:
              $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
          additionalProperties: false

+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
  $defs:
    qcom-sc8280xp-tlmm-state:
      type: object
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts 
b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index b04f72ec097c..aa0cec0b4cc2 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -503,6 +503,18 @@ &usb_2_qmpphy0 {
         status = "okay";
  };

+&usb_2 {
+       pinctrl-0 = <&usb2_en_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&usb_2_dwc3 {
+       phy-names = "usb2-port0", "usb3-port0";
+       phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+};
+
  &xo_board_clk {
         clock-frequency = <38400000>;
  };
@@ -655,4 +667,19 @@ wake-pins {
                         bias-pull-up;
                 };
         };
+
+       usb2-en-hog {
+               gpio-hog;
+               gpios = <24 GPIO_ACTIVE_LOW>;
+               output-low;
+       };
+
+       usb2_en_state: usb2-en-state {
+               /* TS3USB221A USB2.0 mux select */
+               pins = "gpio24";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-low;
+       };


Regards,
Krishna,