From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from pegase2.c-s.fr (pegase2.c-s.fr [93.17.235.10]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 027532C0296; Sat, 15 Nov 2025 13:20:54 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=93.17.235.10 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1763212857; cv=none; b=D2Eb/kkeBIo+Q7wcUYdGOCl9/vPwC1V4XePJbslbn00ebIUHnOozWO63RJUhe7Ad0kQ5P0/pcCaKJS6ngdeUSztoZV1D7/xuyyipOogGpeTK+RQvuMiBi3iqOudQKawdyG9lI/Xc4gu7tm+8yTuohiWjkQEMDEOMYqOB7AnbB4c= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1763212857; c=relaxed/simple; bh=NZOU2pdchDrd59AXbQMYen063c1FMdYvNq7KuWjU+/Q=; h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From: In-Reply-To:Content-Type; b=HPY1Cx/DOCymhDcWNvhEEcUDXd16evIHVCbmOddlUI2z+a1GEZzZ+OuEF6yZYCGlIXrbeE7dpFJulKc3+OlbUZo+M0bs4MVS8ixaSfTsCcEkUuRMy1+jfbLMEajwxP25eb5GGcWHY1xJheVdVVsohmB7RkFAOtvQ5eUhEub4YEo= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=csgroup.eu; spf=pass smtp.mailfrom=csgroup.eu; arc=none smtp.client-ip=93.17.235.10 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=csgroup.eu Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=csgroup.eu Received: from localhost (mailhub4.si.c-s.fr [172.26.127.67]) by localhost (Postfix) with ESMTP id 4d7v9f6SNyz9sTW; Sat, 15 Nov 2025 13:55:02 +0100 (CET) X-Virus-Scanned: amavisd-new at c-s.fr Received: from pegase2.c-s.fr ([172.26.127.65]) by localhost (pegase2.c-s.fr [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id Trl3BISnWbBX; Sat, 15 Nov 2025 13:55:02 +0100 (CET) Received: from messagerie.si.c-s.fr (messagerie.si.c-s.fr [192.168.25.192]) by pegase2.c-s.fr (Postfix) with ESMTP id 4d7v9f5Lv9z9sTS; Sat, 15 Nov 2025 13:55:02 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by messagerie.si.c-s.fr (Postfix) with ESMTP id A12408B770; Sat, 15 Nov 2025 13:55:02 +0100 (CET) X-Virus-Scanned: amavisd-new at c-s.fr Received: from messagerie.si.c-s.fr ([127.0.0.1]) by localhost (messagerie.si.c-s.fr [127.0.0.1]) (amavisd-new, port 10023) with ESMTP id pGy1IFFuN1zE; Sat, 15 Nov 2025 13:55:02 +0100 (CET) Received: from [192.168.235.99] (unknown [192.168.235.99]) by messagerie.si.c-s.fr (Postfix) with ESMTP id 38C568B76E; Sat, 15 Nov 2025 13:55:01 +0100 (CET) Message-ID: Date: Sat, 15 Nov 2025 13:55:00 +0100 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH net-next v16 00/15] net: phy: Introduce PHY ports representation To: Maxime Chevallier , davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?Q?K=C3=B6ry_Maincent?= , =?UTF-8?Q?Marek_Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?Q?Nicol=C3=B2_Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau References: <20251113081418.180557-1-maxime.chevallier@bootlin.com> From: Christophe Leroy Content-Language: fr-FR In-Reply-To: <20251113081418.180557-1-maxime.chevallier@bootlin.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Le 13/11/2025 à 09:14, Maxime Chevallier a écrit : > Hi everyone, > > This is v16 of the phy_port work. Changes are typos, a more relaxed > check when parsing DT pairs, and binding updates. Thanks a lot to Andrew > and Rob for the reviews on the last round. > > This series conflicts with Romain's series on fiber support for dp83869: > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fall%2F20251110-sfp-1000basex-v2-0-dd5e8c1f5652%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692158446%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=fbKgJgNn%2FaI%2BH3p9hjlVl7sQnVRtVtoFA3DEzKborUU%3D&reserved=0 > > As a remainder, a few important notes : > > - This is only a first phase. It instantiates the port, and leverage > that to make the MAC <-> PHY <-> SFP usecase simpler. > > - Next phase will deal with controlling the port state, as well as the > netlink uAPI for that. > > - The end-goal is to enable support for complex port MUX. This > preliminary work focuses on PHY-driven ports, but this will be > extended to support muxing at the MII level (Multi-phy, or compo PHY > + SFP as found on Turris Omnia for example). > > - The naming is definitely not set in stone. I named that "phy_port", > but this may convey the false sense that this is phylib-specific. > Even the word "port" is not that great, as it already has several > different meanings in the net world (switch port, devlink port, > etc.). I used the term "connector" in the binding. > > A bit of history on that work : > > The end goal that I personnaly want to achieve is : > > + PHY - RJ45 > | > MAC - MUX -+ PHY - RJ45 > > After many discussions here on netdev@, but also at netdevconf[1] and > LPC[2], there appears to be several analoguous designs that exist out > there. > > [1] : https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnetdevconf.info%2F0x17%2Fsessions%2Ftalk%2Fimproving-multi-phy-and-multi-port-interfaces.html&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692180471%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=HJZwQP6qPup6YH1XU4WOmMY%2BLekJdvClUFIoT4ieC8s%3D&reserved=0 > [2] : https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flpc.events%2Fevent%2F18%2Fcontributions%2F1964%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692199016%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=GfYNvE46zApzJzglRQ5xmrpVnbnFF2Q7ZkvDY84evos%3D&reserved=0 (video isn't the > right one) > > Take the MAchiatobin, it has 2 interfaces that looks like this : > > MAC - PHY -+ RJ45 > | > + SFP - Whatever the module does > > Now, looking at the Turris Omnia, we have : > > > MAC - MUX -+ PHY - RJ45 > | > + SFP - Whatever the module does > > We can find more example of this kind of designs, the common part is > that we expose multiple front-facing media ports. This is what this > current work aims at supporting. As of right now, it does'nt add any > support for muxing, but this will come later on. > > This first phase focuses on phy-driven ports only, but there are already > quite some challenges already. For one, we can't really autodetect how > many ports are sitting behind a PHY. That's why this series introduces a > new binding. Describing ports in DT should however be a last-resort > thing when we need to clear some ambiguity about the PHY media-side. > > The only use-cases that we have today for multi-port PHYs are combo PHYs > that drive both a Copper port and an SFP (the Macchiatobin case). This > in itself is challenging and this series only addresses part of this > support, by registering a phy_port for the PHY <-> SFP connection. The > SFP module should in the end be considered as a port as well, but that's > not yet the case. > > However, because now PHYs can register phy_ports for every media-side > interface they have, they can register the capabilities of their ports, > which allows making the PHY-driver SFP case much more generic. > > Let me know what you think, I'm all in for discussions :) > > Regards, For the series: Tested-by: Christophe Leroy > > Changes in v16: > - From Andrew, relaxed the check on the number of pairs so that we only > fail when baseT is missing pairs > - Add a check for either 1, 2 or 4 pairs > - Lots of typos (mostly lanes -> pairs) > - Added Andrew's review tags (thanks again) > - From Rob, added an "else" statement in the ethernet-connector binding > - Changed the node name for ethernet connectors to be decimal > > Changes in V15: > - Update bindings, docs and code to use pairs instead of lanes > - Make pairs only relevant for BaseT > > Changes in V14: > - Fixed kdoc > - Use the sfp module_caps feature. > > Changes in V13: > - Added phy_caps support for interface selection > - Aggregated tested-by tags > > Changes in V12: > - Moved some of phylink's internal helpers to phy_caps for reuse in > phylib > - Fixed SFP interface selection > - Added Rob's review and changes in patch 6 > > Changes in V11: > - The ti,fiber-mode property was deprecated in favor of the > ethernet-connector binding > - The .attach_port was split into an MDI and an MII version > - I added the warning back in the AR8031 PHY driver > - There is now an init-time check on the number of lanes associated to > every linkmode, making sure the number of lanes is above or equal to > the minimum required > - Various typos were fixed all around > - We no longer use sfp_select_interface() for SFP interface validation > > Changes in V10: > - Rebase on net-next > - Fix a typo reported by Köry > - Aggregate all reviews > - Fix the conflict on the qcom driver > > Changes in V9: > - Removed maxItems and items from the connector binding > - Fixed a typo in the binding > > Changes in V8: > - Added maxItems on the connector media binding > - Made sure we parse a single medium > - Added a missing bitwise macro > > Changes in V7: > - Move ethtool_medium_get_supported to phy_caps > - support combo-ports, each with a given set of supported modes > - Introduce the notion of 'not-described' ports > > Changes in V6: > > - Fixed kdoc on patch 3 > - Addressed a missing port-ops registration for the Marvell 88x2222 > driver > - Addressed a warning reported by Simon on the DP83822 when building > without CONFIG_OF_MDIO > > Changes in V5 : > > - renamed the bindings to use the term "connector" instead of "port" > - Rebased, and fixed some issues reported on the 83822 driver > - Use phy_caps > > Changes in V4 : > > - Introduced a kernel doc > - Reworked the mediums definitions in patch 2 > - QCA807x now uses the generic SFP support > - Fixed some implementation bugs to build the support list based on the > interfaces supported on a port > > V15: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fall%2F20251106094742.2104099-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692220733%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=SBossM1KcxSldiNhV71oehI66tKkBsYryLXLVuu9JWs%3D&reserved=0 > V14: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20251013143146.364919-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692237443%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=QvbbA%2BUzln1JQTwT4Hhn8SXropD4pQ8Ss8UkIAggpH0%3D&reserved=0 > V13: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250921160419.333427-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692252741%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=vJvKSHr8SSa9L9dU4rGkoWUcKxpnG%2FxZ2zoR7FOyeYE%3D&reserved=0 > V12: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250909152617.119554-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692268301%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=ZcyGywWFEONxQYbNszGbv57WK5KxWPP2%2FJFYVeu5ev4%3D&reserved=0 > V11: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250814135832.174911-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692283514%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=wRthSrgiu5zV4pV6Wj6rrRp4Zj3Y%2FU7pCWuJq3Kkmi4%3D&reserved=0 > V10: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250722121623.609732-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692298054%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=AF7a%2FNgMAoFZKQf1oURLWqCYglsKG%2FnmLkuyYc1ubMM%3D&reserved=0 > V9: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250717073020.154010-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692316899%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=X8olmChjGo3BtOADzrwW6H5Ho9C15OB%2FTmCgYWnRdos%3D&reserved=0 > V8: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250710134533.596123-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692334432%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=cInZohiCGoQVoSaAOw4ym7ahfyMYuVTFsWvo4fi500A%3D&reserved=0 > v7: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250630143315.250879-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692351034%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=uvaVASBiuBBG01svghO%2BSey7q95F3LzfxDz%2FmPOGB1Q%3D&reserved=0 > V6: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250507135331.76021-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692371801%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=gu5JPp%2BYLJwgiqvD8axB2ipjHa1ICHJlPBjvzm5mU70%3D&reserved=0 > V5: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250425141511.182537-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692389327%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=Os1hQJEu4LbqdPMdAuwBArekFd7OfRuTG%2Fgq0CzmqY8%3D&reserved=0 > V4: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250213101606.1154014-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692405507%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=ve3LPTeQ5KEQbIfCB8sS2mxAMIeT2nvHFa0srBqSS6M%3D&reserved=0 > V3: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250207223634.600218-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692420383%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=gN36neiSqhj%2FslVSU8oWrOvdam2nZ08I2tVW1BjGqNQ%3D&reserved=0 > RFC V2: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20250122174252.82730-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692435564%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=ae3RoCo5SF0u5vvruXV9UGgXojDP0Xy%2BCKnMEZxXaL0%3D&reserved=0 > RFC V1: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20241220201506.2791940-1-maxime.chevallier%40bootlin.com%2F&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7Cc3434ae46bd540e2e87708de228ca8e0%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C638986184692450191%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=wXdzjfHVActY7No3GBa%2BA%2FWSIS9OXtmLwGqebXEcJvc%3D&reserved=0 > > Maxime > > Maxime Chevallier (15): > dt-bindings: net: Introduce the ethernet-connector description > net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values > net: phy: Introduce PHY ports representation > net: phy: dp83822: Add support for phy_port representation > dt-bindings: net: dp83822: Deprecate ti,fiber-mode > net: phy: Create a phy_port for PHY-driven SFPs > net: phy: Introduce generic SFP handling for PHY drivers > net: phy: marvell-88x2222: Support SFP through phy_port interface > net: phy: marvell: Support SFP through phy_port interface > net: phy: marvell10g: Support SFP through phy_port > net: phy: at803x: Support SFP through phy_port interface > net: phy: qca807x: Support SFP through phy_port interface > net: phy: Only rely on phy_port for PHY-driven SFP > net: phy: dp83822: Add SFP support through the phy_port interface > Documentation: networking: Document the phy_port infrastructure > > .../bindings/net/ethernet-connector.yaml | 57 +++ > .../devicetree/bindings/net/ethernet-phy.yaml | 18 + > .../devicetree/bindings/net/ti,dp83822.yaml | 9 +- > Documentation/networking/index.rst | 1 + > Documentation/networking/phy-port.rst | 111 ++++++ > MAINTAINERS | 3 + > drivers/net/phy/Makefile | 2 +- > drivers/net/phy/dp83822.c | 78 ++-- > drivers/net/phy/marvell-88x2222.c | 94 ++--- > drivers/net/phy/marvell.c | 92 ++--- > drivers/net/phy/marvell10g.c | 52 +-- > drivers/net/phy/phy-caps.h | 5 + > drivers/net/phy/phy-core.c | 6 + > drivers/net/phy/phy_caps.c | 65 ++++ > drivers/net/phy/phy_device.c | 337 +++++++++++++++++- > drivers/net/phy/phy_port.c | 212 +++++++++++ > drivers/net/phy/qcom/at803x.c | 77 ++-- > drivers/net/phy/qcom/qca807x.c | 72 ++-- > include/linux/ethtool.h | 39 +- > include/linux/phy.h | 63 +++- > include/linux/phy_port.h | 99 +++++ > include/uapi/linux/ethtool.h | 20 ++ > net/ethtool/common.c | 268 ++++++++------ > 23 files changed, 1399 insertions(+), 381 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/ethernet-connector.yaml > create mode 100644 Documentation/networking/phy-port.rst > create mode 100644 drivers/net/phy/phy_port.c > create mode 100644 include/linux/phy_port.h >