Re: [PATCH 1/3] hwmon: (pmbus/mpq7932) Get page count based on chip info

[Guenter Roeck <linux@roeck-us.net>]

On 9/10/23 20:41, Saravanan Sekar wrote:
> Get page count using compatible match to support the series of chipsets
> which differs in number of regualator/page.
> 
> Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
> ---
>   drivers/hwmon/pmbus/mpq7932.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/mpq7932.c b/drivers/hwmon/pmbus/mpq7932.c
> index 865d42edda1a..af3e5e9590c8 100644
> --- a/drivers/hwmon/pmbus/mpq7932.c
> +++ b/drivers/hwmon/pmbus/mpq7932.c
> @@ -105,7 +105,7 @@ static int mpq7932_probe(struct i2c_client *client)
>   		return -ENOMEM;
>   
>   	info = &data->info;
> -	info->pages = MPQ7932_NUM_PAGES;
> +	info->pages = (int)device_get_match_data(&client->dev);

I kind of doubt that this works without generating a compiler warning.

Also, does this work with CONFIG_OF=n ?

Guenter

>   	info->format[PSC_VOLTAGE_OUT] = direct;
>   	info->m[PSC_VOLTAGE_OUT] = 160;
>   	info->b[PSC_VOLTAGE_OUT] = -33;
> @@ -115,7 +115,7 @@ static int mpq7932_probe(struct i2c_client *client)
>   	}
>   
>   #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR)
> -	info->num_regulators = ARRAY_SIZE(mpq7932_regulators_desc);
> +	info->num_regulators = info->pages;
>   	info->reg_desc = mpq7932_regulators_desc;
>   #endif
>   
> @@ -129,7 +129,7 @@ static int mpq7932_probe(struct i2c_client *client)
>   }
>   
>   static const struct of_device_id mpq7932_of_match[] = {
> -	{ .compatible = "mps,mpq7932"},
> +	{ .compatible = "mps,mpq7932", .data = (void *)MPQ7932_NUM_PAGES },
>   	{},
>   };
>   MODULE_DEVICE_TABLE(of, mpq7932_of_match);