Re: [PATCH] net: phy: dp83869: fix interrupts issue, not correctly handled when operate with an optical fiber sfp.

[Andrew Lunn <andrew@lunn.ch>]

On Sun, May 18, 2025 at 10:24:17PM -0400, chalianis1@gmail.com wrote:
> From: Anis Chali <chalianis1@gmail.com>
> 
> to correctly clear the interrupts both status registers must be read.
> 
> from datasheet: http://ti.com/lit/ds/symlink/dp83869hm.pdf
> 7.3.6 Interrupt
> The DP83869HM can be configured to generate an interrupt when changes of internal status occur. The interrupt
> allows a MAC to act upon the status in the PHY without polling the PHY registers. The interrupt source can be
> selected through the interrupt registers, MICR (12h) and FIBER_INT_EN (C18h). The interrupt status can be
> read from ISR (13h) and FIBER_INT_STTS (C19h) registers. Some interrupts are enabled by default and can
> be disabled through register access. Both the interrupt status registers must be read in order to clear pending
> interrupts. Until the pending interrupts are cleared, new interrupts may not be routed to the interrupt pin.
> 
> Signed-off-by: Anis Chali <chalianis1@gmail.com>

This seems like something for stable?

https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html

Please include a Fixes: tag.

Please base this patch on the net tree:

https://www.kernel.org/doc/html/latest/process/maintainer-netdev.html

> ---
>  drivers/net/phy/dp83869.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
> index a62cd838a9ea..98d773175462 100644
> --- a/drivers/net/phy/dp83869.c
> +++ b/drivers/net/phy/dp83869.c
> @@ -25,6 +25,7 @@
>  #define DP83869_CFG2		0x14
>  #define DP83869_CTRL		0x1f
>  #define DP83869_CFG4		0x1e
> +#define DP83869_FX_INT_STS	0xc19

It appears that this is an Extended register, so it belong after
DP83869_FX_CTRL?

    Andrew

---
pw-bot: cr