Re: [PATCH v5 8/8] i2c: i2c-mlxbf.c: Update binding devicetree

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/09/2022 19:47, Asmaa Mnebhi wrote:
> In the latest version of the i2c-mlxbf.c driver, the "Smbus block"
> resource was broken down to 3 separate resources "Smbus timer",
> "Smbus master" and "Smbus slave" to accommodate for BlueField-3
> SoC registers' changes.
> 
> Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
> ---


>    reg:
>      minItems: 3
> @@ -25,6 +27,9 @@ properties:
>        - description: Cause master registers
>        - description: Cause slave registers
>        - description: Cause coalesce registers
> +      - description: Smbus timer registers
> +      - description: Smbus master registers
> +      - description: Smbus slave registers
>  
>    interrupts:
>      maxItems: 1
> @@ -35,6 +40,13 @@ properties:
>        bus frequency used to configure timing registers;
>        The frequency is expressed in Hz. Default is 100000.
>  
> +  resource_version:

No underscores in names.

> +    enum: [ 0, 1 ]
> +    description:
> +      Version of the device tree. resource_version = 0 when the driver uses
> +      Smbus block resource. resource_version = 1 when the driver uses Smbus
> +      timer, Smbus master and Smbus slave resources.

No way. That's not a DT property.

> +
>  required:
>    - compatible
>    - reg
> @@ -42,18 +54,6 @@ required:
>  
>  unevaluatedProperties: false
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        enum:
> -          - mellanox,i2c-mlxbf1
> -
> -then:
> -  properties:
> -    reg:
> -      maxItems: 3

Why?

> -
>  examples:
>    - |
>      i2c@2804000 {
> @@ -61,8 +61,13 @@ examples:
>          reg = <0x02804000 0x800>,
>                <0x02801200 0x020>,
>                <0x02801260 0x020>;
> +              <0x00000001 0x1>;
> +              <0x02804000 0x40>,
> +              <0x02804200 0x200>,
> +              <0x02804400 0x200>,
>          interrupts = <57>;
>          clock-frequency = <100000>;
> +        resource_version = <1>;
>      };
>  
>    - |
> @@ -72,6 +77,25 @@ examples:
>                <0x02808e00 0x020>,
>                <0x02808e20 0x020>,
>                <0x02808e40 0x010>;
> +              <0x02808800 0x040>;
> +              <0x02808a00 0x200>,
> +              <0x02808c00 0x200>,
>          interrupts = <57>;
>          clock-frequency = <400000>;
> +        resource_version = <1>;
> +    };
> +
> +  - |
> +    i2c@2808800 {
> +        compatible = "mellanox,i2c-mlxbf3";
> +        reg = <0x00000001 0x1>,
> +              <0x13404400 0x020>,
> +              <0x13404420 0x020>,
> +              <0x13404440 0x010>;
> +              <0x13404480 0x40>,
> +              <0x13404200 0x200>,
> +              <0x13404000 0x200>,

No need for the same example.

Best regards,
Krzysztof