From: Lokesh Vutla <lokeshvutla@ti.com>
To: Aswath Govindraju <a-govindraju@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/2] arm64: dts: ti: k3-am64: Add GPIO DT nodes
Date: Fri, 19 Mar 2021 11:55:28 +0530 [thread overview]
Message-ID: <b736ac35-6f2b-a31f-2704-2412ab3bbec4@ti.com> (raw)
In-Reply-To: <20210319051950.17549-2-a-govindraju@ti.com>
On 19/03/21 10:49 am, Aswath Govindraju wrote:
> Add device tree nodes for GPIO modules and interrupt controller in main
> and mcu domains.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Thanks and regards,
Lokesh
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 45 ++++++++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 27 ++++++++++++++
> 2 files changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index a03b66456062..b997d13f9ec5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -373,6 +373,51 @@
> clocks = <&k3_clks 145 0>;
> };
>
> + main_gpio_intr: interrupt-controller0 {
> + compatible = "ti,sci-intr";
> + ti,intr-trigger-type = <1>;
> + interrupt-controller;
> + interrupt-parent = <&gic500>;
> + #interrupt-cells = <1>;
> + ti,sci = <&dmsc>;
> + ti,sci-dev-id = <3>;
> + ti,interrupt-ranges = <0 32 16>;
> + };
> +
> + main_gpio0: gpio@600000 {
> + compatible = "ti,am64-gpio", "ti,keystone-gpio";
> + reg = <0x0 0x00600000 0x0 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&main_gpio_intr>;
> + interrupts = <190>, <191>, <192>,
> + <193>, <194>, <195>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <87>;
> + ti,davinci-gpio-unbanked = <0>;
> + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 77 0>;
> + clock-names = "gpio";
> + };
> +
> + main_gpio1: gpio@601000 {
> + compatible = "ti,am64-gpio", "ti,keystone-gpio";
> + reg = <0x0 0x00601000 0x0 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&main_gpio_intr>;
> + interrupts = <180>, <181>, <182>,
> + <183>, <184>, <185>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <88>;
> + ti,davinci-gpio-unbanked = <0>;
> + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 78 0>;
> + clock-names = "gpio";
> + };
> +
> sdhci0: mmc@fa10000 {
> compatible = "ti,am64-sdhci-8bit";
> reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> index 1d2be485a669..99e94dee1bd4 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> @@ -73,4 +73,31 @@
> power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 148 0>;
> };
> +
> + mcu_gpio_intr: interrupt-controller1 {
> + compatible = "ti,sci-intr";
> + ti,intr-trigger-type = <1>;
> + interrupt-controller;
> + interrupt-parent = <&gic500>;
> + #interrupt-cells = <1>;
> + ti,sci = <&dmsc>;
> + ti,sci-dev-id = <5>;
> + ti,interrupt-ranges = <0 104 4>;
> + };
> +
> + mcu_gpio0: gpio@4201000 {
> + compatible = "ti,am64-gpio", "keystone-gpio";
> + reg = <0x0 0x4201000 0x0 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&mcu_gpio_intr>;
> + interrupts = <30>, <31>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <23>;
> + ti,davinci-gpio-unbanked = <0>;
> + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 79 0>;
> + clock-names = "gpio";
> + };
> };
>
next prev parent reply other threads:[~2021-03-19 6:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-19 5:19 [PATCH v3 0/2] AM64: Add support for GPIO Aswath Govindraju
2021-03-19 5:19 ` [PATCH v3 1/2] arm64: dts: ti: k3-am64: Add GPIO DT nodes Aswath Govindraju
2021-03-19 6:25 ` Lokesh Vutla [this message]
2021-03-19 5:19 ` [PATCH v3 2/2] arm64: dts: ti: k3-am642: reserve gpio in mcu domain for firmware usage Aswath Govindraju
2021-03-19 6:25 ` Lokesh Vutla
2021-03-22 15:42 ` [PATCH v3 0/2] AM64: Add support for GPIO Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b736ac35-6f2b-a31f-2704-2412ab3bbec4@ti.com \
--to=lokeshvutla@ti.com \
--cc=a-govindraju@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®