On Tue, 24 Jun 2025, Jiri Slaby (SUSE) wrote: > After commit 795158691cc0 ("serial: 8250: extract > serial8250_initialize()"), split serial8250_initialize() even more -- > the mctrl part of this code can be separated into > serial8250_init_mctrl() -- done now. > > Signed-off-by: Jiri Slaby (SUSE) > Suggested-by: Ilpo Järvinen Heh, I didn't even realize I was suggesting this :-D but it's good nonetheless. Reviewed-by: Ilpo Järvinen > Cc: Andy Shevchenko > --- > [v2] > * use port-> directly. > * do not remove curly braces. > Both rebase errors -- noticed by Andy. > --- > drivers/tty/serial/8250/8250_port.c | 21 +++++++++++++-------- > 1 file changed, 13 insertions(+), 8 deletions(-) > > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c > index 48c30e158cb8..0f85a2f292fc 100644 > --- a/drivers/tty/serial/8250/8250_port.c > +++ b/drivers/tty/serial/8250/8250_port.c > @@ -2216,15 +2216,8 @@ static void serial8250_THRE_test(struct uart_port *port) > up->bugs |= UART_BUG_THRE; > } > > -static void serial8250_initialize(struct uart_port *port) > +static void serial8250_init_mctrl(struct uart_port *port) > { > - struct uart_8250_port *up = up_to_u8250p(port); > - unsigned long flags; > - bool lsr_TEMT, iir_NOINT; > - > - serial_port_out(port, UART_LCR, UART_LCR_WLEN8); > - > - uart_port_lock_irqsave(port, &flags); > if (port->flags & UPF_FOURPORT) { > if (!port->irq) > port->mctrl |= TIOCM_OUT1; > @@ -2235,6 +2228,18 @@ static void serial8250_initialize(struct uart_port *port) > } > > serial8250_set_mctrl(port, port->mctrl); > +} > + > +static void serial8250_initialize(struct uart_port *port) > +{ > + struct uart_8250_port *up = up_to_u8250p(port); > + unsigned long flags; > + bool lsr_TEMT, iir_NOINT; > + > + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); > + > + uart_port_lock_irqsave(port, &flags); > + serial8250_init_mctrl(port); > > /* > * Serial over Lan (SoL) hack: > -- i.