From: Dinh Nguyen <dinguyen@kernel.org>
To: Lothar Rubusch <l.rubusch@gmail.com>,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
martin.petersen@oracle.com, pabeni@redhat.com,
rostedt@goodmis.org, bhelgaas@google.com
Cc: arnd@arndb.de, matthew.gerlach@altera.com,
tien.fong.chee@altera.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 00/11] Add Enclustra Arria10 and Cyclone5 SoMs
Date: Wed, 22 Oct 2025 06:22:48 -0500 [thread overview]
Message-ID: <b7c569b4-12c1-438b-971b-75c0f84c4837@kernel.org> (raw)
In-Reply-To: <20251018121155.7743-1-l.rubusch@gmail.com>
On 10/18/25 07:11, Lothar Rubusch wrote:
> This series was already presented in November 2024.
> https://lkml.org/lkml/2024/11/16/198
>
> Due to the ongoing complex situation with Intel's maintainership,
> the series likely did not progress further at the time. In early
> 2025, Tien Fong Chee (in CC) informed me that Altera is expected
> to resume maintainership in late 2025. I was referred to Matthew
> Gerlach (also CC'd), who, as I understand, is taking over at least
> part of the Intel/Altera-related responsibilities.
>
> At this year’s OSS in Amsterdam, I had an encouraging discussion
> with Arnd Bergmann (CC’d), which motivated me to continue pursuing
> this patch series.
>
> Hence, a slightly reworded update goes now again to the mailing lists
> and will drive the binding check bot crazy. While not all Altera
> bindings may be fully resolved yet, this series should not introduce
> any new issues.
> I’m submitting it based on prior acknowledgments and will wait a few
> weeks to see if a maintainer responds. If it remains orphaned, I’ll
> follow up with you, Arnd, as previously mentioned - this is just a
> heads-up for now.
>
> I hope this approach is acceptable. Please let me know otherwise.
> Thank you for all the support in this so far.
>
> Add device-tree support for the following SoMs:
> - Mercury SA1 (cyclone5)
> - Mercury+ SA2 (cyclone5)
> - Mercury+ AA1 (arria10)
>
> Further add device-tree support for the corresponding carrier boards:
> - Mercury+ PE1
> - Mercury+ PE3
> - Mercury+ ST1
>
> Finally, provide generic support for combinations of the above with
> one of the boot-modes
> - SD
> - eMMC
> - QSPI
>
> All of the above elements can be freely combined, with the combinations
> specified in the provided .dts files. This renders the existing .dts file
> unnecessary. Any additional minor fixes to the dtbs_checks are applied
> separately.
>
> This approach is also necessary for integrating with the corresponding
> bootloader using dts/upstream, which is one of the reasons for the .dtsi
> split.
>
> Note: I used AI tools to help refine the wording of the commit messages.
>
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> ---
> v6 -> v7:
> - dt-bindings: alphabetic order for aa1 variants fixed
>
> v5 -> v6:
> - update to recent kernel version
> - add Arnd Bergman in CC (refered to OSS / Amsterdam)
> - add Matthew Gerlach in CC
> - add chee tien fong in CC
> - change phy-mode "rgmii" to "rgmii-id", due to binding checks, similar
> boards in that context and the allowing internal delay (id) or strict
> no internal delay, seems to make no difference here
> - removal of compatibility "spansion,s25fl512s" due to deprecation of
> older vendor properties for "jedec,spi-nor"
> - change commit header wording "combinations" to "variants"
>
> v4 -> v5:
> - separate generic socfpga dt fixes from this patch set. The focus of this
> patch set is the dts/dtsi files and related bindings, not additional
> intel/socfpga refactoring
>
> v3 -> v4:
> - add separate patch to match "snps,dwmac" compatible in corresponding
> driver, required by binding check
> - replace non-standard node names in .dtsi files by node names recommended
> by the device tree standard v0.4
>
> v2 -> v3:
> - dropped the patch to add the socfpga clock bindings:
> Documentation/devicetree/bindings/clock/altr,socfpga-a10.yaml
> reason: refactoring the "altr,socfpga-" TXT files to .yaml files is a
> different story involving several other files, thus can be part of a
> future patch series, not related to the current upstreaming the
> Enclustra DTS support, so dropped
> - adjust comments on boot mode selection
> - adjust titles to several bindings patches
>
> v1 -> v2:
> - split bindings and DT adjustments/additions
> - add several fixes to the socfpga.dtsi and socfpga_arria10.dtsi where
> bindings did not match
> - extend existing bindings by properties and nods from arria10 setup
> - implement the clock binding altr,socfpga-a10.yaml based on existing
> text file, rudimentary datasheet study and requirements of the
> particular DT setup
> ---
> Lothar Rubusch (11):
> ARM: dts: socfpga: add Enclustra boot-mode dtsi
> ARM: dts: socfpga: add Enclustra base-board dtsi
> ARM: dts: socfpga: add Enclustra Mercury SA1
> dt-bindings: altera: add Enclustra Mercury SA1
> ARM: dts: socfpga: add Enclustra Mercury+ SA2
> dt-bindings: altera: add binding for Mercury+ SA2
> ARM: dts: socfpga: add Mercury AA1 variants
> dt-bindings: altera: add Mercury AA1 variants
> ARM: dts: socfpga: removal of generic PE1 dts
> dt-bindings: altera: removal of generic PE1 dts
> ARM: dts: socfpga: add Enclustra SoM dts files
>
> .../devicetree/bindings/arm/altera.yaml | 24 ++-
> arch/arm/boot/dts/intel/socfpga/Makefile | 25 ++-
> .../socfpga/socfpga_arria10_mercury_aa1.dtsi | 143 ++++++++++++++---
> .../socfpga_arria10_mercury_aa1_pe1_emmc.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_pe1_qspi.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_pe1_sdmmc.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_pe3_emmc.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_pe3_qspi.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_pe3_sdmmc.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_st1_emmc.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_st1_qspi.dts | 16 ++
> .../socfpga_arria10_mercury_aa1_st1_sdmmc.dts | 16 ++
> .../socfpga/socfpga_arria10_mercury_pe1.dts | 55 -------
> .../socfpga/socfpga_cyclone5_mercury_sa1.dtsi | 143 +++++++++++++++++
> .../socfpga_cyclone5_mercury_sa1_pe1_emmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa1_pe1_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa1_pe3_emmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa1_pe3_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa1_st1_emmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa1_st1_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts | 16 ++
> .../socfpga/socfpga_cyclone5_mercury_sa2.dtsi | 146 ++++++++++++++++++
> .../socfpga_cyclone5_mercury_sa2_pe1_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa2_pe3_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts | 16 ++
> .../socfpga_cyclone5_mercury_sa2_st1_qspi.dts | 16 ++
> ...socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts | 16 ++
> ...cfpga_enclustra_mercury_bootmode_emmc.dtsi | 12 ++
> ...cfpga_enclustra_mercury_bootmode_qspi.dtsi | 8 +
> ...fpga_enclustra_mercury_bootmode_sdmmc.dtsi | 8 +
> .../socfpga_enclustra_mercury_pe1.dtsi | 33 ++++
> .../socfpga_enclustra_mercury_pe3.dtsi | 55 +++++++
> .../socfpga_enclustra_mercury_st1.dtsi | 15 ++
> 36 files changed, 972 insertions(+), 79 deletions(-)
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
> delete mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
> create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
>
>
> base-commit: 4b17a60d1e1c2d9d2ccbd58642f6f4ac2fa364ba
Applied!
Thanks,
Dinh
prev parent reply other threads:[~2025-10-22 11:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-18 12:11 Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 01/11] ARM: dts: socfpga: add Enclustra boot-mode dtsi Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 02/11] ARM: dts: socfpga: add Enclustra base-board dtsi Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 03/11] ARM: dts: socfpga: add Enclustra Mercury SA1 Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 04/11] dt-bindings: altera: " Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 05/11] ARM: dts: socfpga: add Enclustra Mercury+ SA2 Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 06/11] dt-bindings: altera: add binding for " Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 07/11] ARM: dts: socfpga: add Mercury AA1 variants Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 08/11] dt-bindings: altera: " Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 09/11] ARM: dts: socfpga: removal of generic PE1 dts Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 10/11] dt-bindings: altera: " Lothar Rubusch
2025-10-18 12:11 ` [PATCH v7 11/11] ARM: dts: socfpga: add Enclustra SoM dts files Lothar Rubusch
2025-10-20 16:11 ` [PATCH v7 00/11] Add Enclustra Arria10 and Cyclone5 SoMs Dinh Nguyen
2025-10-21 12:40 ` Lothar Rubusch
2025-10-22 11:22 ` Dinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7c569b4-12c1-438b-971b-75c0f84c4837@kernel.org \
--to=dinguyen@kernel.org \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=l.rubusch@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=matthew.gerlach@altera.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=rostedt@goodmis.org \
--cc=tien.fong.chee@altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®