Re: [PATCH v2 1/7] serial: qcom-geni: fix premature receiver enable

[Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>]

Thanks Johan for the fixes.

On 10/1/2024 6:20 PM, Johan Hovold wrote:
> The receiver should not be enabled until the port is opened so drop the
> bogus call to start rx from the setup code which is shared with the
> console implementation.
> 
> This was added for some confused implementation of hibernation support,
> but the receiver must not be started unconditionally as the port may not
> have been open when hibernating the system.
> 
> Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
> Cc:stable@vger.kernel.org	# 6.2
> Cc: Aniket Randive<quic_arandive@quicinc.com>
> Signed-off-by: Johan Hovold<johan+linaro@kernel.org>
> ---
>   drivers/tty/serial/qcom_geni_serial.c | 1 -
>   1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 6f0db310cf69..9ea6bd09e665 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
>   			       false, true, true);
>   	geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
>   	geni_se_select_mode(&port->se, port->dev_data->mode);
> -	qcom_geni_serial_start_rx(uport);
Does it mean hibernation will break now ? Not sure if its tested with 
hibernation. I can see this call was added to port_setup specifically 
for hibernation but now after removing it, where is it getting fixed ?
I think RX will not be initialized after hibernation.
>   	port->setup = true;
>   
>   	return 0;
> -- 2.45.2