From: "Henning P. Schmiedehausen" <hps@intermeta.de>
To: linux-kernel@vger.kernel.org
Subject: [2.4.21-pre7-ac1] IDE Warning when booting
Date: Wed, 16 Apr 2003 10:16:12 +0000 (UTC) [thread overview]
Message-ID: <b7jahc$8f0$1@tangens.hometree.net> (raw)
Hi,
I get these since many 2.4.21-pre<x>-ac<y> versions.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM BIGFOOT_CY6480A, ATA DISK drive
blk: queue c02d2bc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: IBM-DTLA-307060, ATA DISK drive
blk: queue c02d3018, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
hda: 12706470 sectors (6506 MB) w/67KiB Cache, CHS=790/255/63, DMA
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, (U)DMA
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: [PTBL] [7943/240/63] hdc1 < hdc5 hdc6 >
ide-floppy driver 0.99.newide
The kernels itself are not too stable on my trustworthy old PPro 200
box (which runs rock solid with the RedHat 7.3 release kernels). Not
too stable means "crashes about every other night".
The is a PPro 200 with 256 MBytes RAM, Tyan Mainboard. Not
overclocked, well cooled, lightly loaded. It normally crashes when the
only really disk pushing operation (Backup via Amanda) is started at
night.
I sent some crash reports to Alan, I will post any with pre7-ac1
here. I got a serial console hooked up to that box and I intent to use
it. :-)
Regards
Henning
--
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen INTERMETA GmbH
hps@intermeta.de +49 9131 50 654 0 http://www.intermeta.de/
Java, perl, Solaris, Linux, xSP Consulting, Web Services
freelance consultant -- Jakarta Turbine Development -- hero for hire
next reply other threads:[~2003-04-16 10:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-16 10:16 Henning P. Schmiedehausen [this message]
2003-04-16 10:31 ` Athanasius
2003-04-16 11:16 ` Henning P. Schmiedehausen
2003-04-16 15:32 Mudama, Eric
2003-04-16 21:02 ` Henning P. Schmiedehausen
2003-04-16 16:25 Mudama, Eric
2003-04-16 15:48 ` Alan Cox
2003-04-16 16:39 ` Pau Aliagas
2003-04-16 16:45 Mudama, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='b7jahc$8f0$1@tangens.hometree.net' \
--to=hps@intermeta.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®