mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxim Levitsky <mlevitsk@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>, kvm@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Sean Christopherson <seanjc@google.com>,
	Borislav Petkov <bp@alien8.de>, "H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jim Mattson <jmattson@google.com>,
	x86@kernel.org, Vitaly Kuznetsov <vkuznets@redhat.com>,
	Joerg Roedel <joro@8bytes.org>,
	linux-kernel@vger.kernel.org, Wanpeng Li <wanpengli@tencent.com>
Subject: Re: [PATCH v3 5/7] KVM: x86: nSVM: implement nested vGIF
Date: Mon, 14 Mar 2022 17:21:11 +0200	[thread overview]
Message-ID: <b8794277078e9622c4e1d50f3ca55e785c643ddb.camel@redhat.com> (raw)
In-Reply-To: <8c5fe4f6-49bd-c87a-e76d-64417a1370c0@redhat.com>

On Wed, 2022-03-09 at 14:40 +0100, Paolo Bonzini wrote:
> The patch is good but I think it's possibly to rewrite some parts in an 
> easier way.
> 
> On 3/1/22 15:36, Maxim Levitsky wrote:
> > +	if (svm->vgif_enabled && (svm->nested.ctl.int_ctl & V_GIF_ENABLE_MASK))
> > +		int_ctl_vmcb12_bits |= (V_GIF_MASK | V_GIF_ENABLE_MASK);
> > +	else
> > +		int_ctl_vmcb01_bits |= (V_GIF_MASK | V_GIF_ENABLE_MASK);
> 
> To remember for later: svm->vmcb's V_GIF_ENABLE_MASK is always the same 
> as vgif:
> 
> - if it comes from vmcb12, it must be 1 (and then vgif is also 1)
> 
> - if it comes from vmcb01, it must be equal to vgif (because 
> V_GIF_ENABLE_MASK is set in init_vmcb and never touched again).
> 
> >   
> > +static bool nested_vgif_enabled(struct vcpu_svm *svm)
> > +{
> > +	if (!is_guest_mode(&svm->vcpu) || !svm->vgif_enabled)
> > +		return false;
> > +	return svm->nested.ctl.int_ctl & V_GIF_ENABLE_MASK;
> > +}
> > +
> >   static inline bool vgif_enabled(struct vcpu_svm *svm)
> >   {
> > -	return !!(svm->vmcb->control.int_ctl & V_GIF_ENABLE_MASK);
> > +	struct vmcb *vmcb = nested_vgif_enabled(svm) ? svm->vmcb01.ptr : svm->vmcb;
> > +
> > +	return !!(vmcb->control.int_ctl & V_GIF_ENABLE_MASK);
> >   }
> >   
> 
> Slight simplification:
> 
> - before the patch, vgif_enabled() is just "vgif", because 
> V_GIF_ENABLE_MASK is set in init_vmcb and copied to vmcb02
> 
> - after the patch, vgif_enabled() is also just "vgif".  Outside guest 
> mode the same reasoning applies.  If L2 has enabled vGIF,  vmcb01's 
> V_GIF_ENABLE is equal to vgif per the previous bullet.  If L2 has not 
> enabled vGIF, vmcb02's V_GIF_ENABLE uses svm->vmcb's int_ctl field which 
> is always the same as vgif (see remark above).
> 
> You can make this simplification a separate patch.


This is a very good idea - I'll do this in a separate patch.

> 
> >  static inline void enable_gif(struct vcpu_svm *svm)
> >  {
> > +	struct vmcb *vmcb = nested_vgif_enabled(svm) ? svm->vmcb01.ptr : svm->vmcb;
> > +
> >  	if (vgif_enabled(svm))
> > -		svm->vmcb->control.int_ctl |= V_GIF_MASK;
> > +		vmcb->control.int_ctl |= V_GIF_MASK;
> >  	else
> >  		svm->vcpu.arch.hflags |= HF_GIF_MASK;
> >  }
> >  
> >  static inline void disable_gif(struct vcpu_svm *svm)
> >  {
> > +	struct vmcb *vmcb = nested_vgif_enabled(svm) ? svm->vmcb01.ptr : svm->vmcb;
> > +
> >  	if (vgif_enabled(svm))
> > -		svm->vmcb->control.int_ctl &= ~V_GIF_MASK;
> > +		vmcb->control.int_ctl &= ~V_GIF_MASK;
> >  	else
> >  		svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
> > +
> >  }
> 
> Looks good.  For a little optimization however you could write
> 
> static inline struct vmcb *get_vgif_vmcb(struct vcpu_svm *svm)
> {
> 	if (!vgif)
> 		return NULL;
> 	if (!is_guest_mode(&svm->vcpu)
> 		return svm->vmcb01.ptr;
> 	if ((svm->vgif_enabled && (svm->nested.ctl.int_ctl & V_GIF_ENABLE_MASK))
> 		return svm->vmcb01.ptr;
> 	else
> 		return svm->nested.vmcb02.ptr;
> }
> 
> and then
> 
> 	struct vmcb *vmcb = get_vgif_vmcb(svm);
> 	if (vmcb)
> 		/* use vmcb->control.int_ctl */
> 	else
> 		/* use hflags */

Good idea as well.

Thanks for the review!
Best regards,
	Maxim Levitsky

> 
> Paolo
> 
> >  
> > +static bool nested_vgif_enabled(struct vcpu_svm *svm)
> > +{
> > +	if (!is_guest_mode(&svm->vcpu) || !svm->vgif_enabled)
> > +		return false;
> > +	return svm->nested.ctl.int_ctl & V_GIF_ENABLE_MASK;
> > +}
> > +



  reply	other threads:[~2022-03-14 15:21 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-01 14:36 [PATCH v3 0/7] nSVM/SVM features Maxim Levitsky
2022-03-01 14:36 ` [PATCH v3 1/7] KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running Maxim Levitsky
2022-03-09 13:00   ` Paolo Bonzini
2022-03-14 11:25     ` Maxim Levitsky
2022-03-01 14:36 ` [PATCH v3 2/7] KVM: x86: nSVM: implement nested LBR virtualization Maxim Levitsky
2022-03-09 13:00   ` Paolo Bonzini
2022-03-22 16:53     ` Maxim Levitsky
2022-03-01 14:36 ` [PATCH v3 3/7] KVM: x86: nSVM: implement nested VMLOAD/VMSAVE Maxim Levitsky
2022-03-01 14:36 ` [PATCH v3 4/7] KVM: x86: nSVM: support PAUSE filter threshold and count when cpu_pm=on Maxim Levitsky
2022-03-09 13:12   ` Paolo Bonzini
2022-03-22 16:52     ` Maxim Levitsky
2022-03-09 18:35   ` Jim Mattson
2022-03-09 18:47     ` Paolo Bonzini
2022-03-09 19:07       ` Jim Mattson
2022-03-21 21:36         ` Maxim Levitsky
2022-03-21 21:59           ` Jim Mattson
2022-03-21 22:11             ` Maxim Levitsky
2022-03-21 22:41               ` Jim Mattson
2022-03-22 10:12                 ` Paolo Bonzini
2022-03-22 11:17                   ` Maxim Levitsky
2022-03-01 14:36 ` [PATCH v3 5/7] KVM: x86: nSVM: implement nested vGIF Maxim Levitsky
2022-03-09 13:40   ` Paolo Bonzini
2022-03-14 15:21     ` Maxim Levitsky [this message]
2022-03-01 14:36 ` [PATCH v3 6/7] KVM: x86: SVM: allow to force AVIC to be enabled Maxim Levitsky
2022-03-09 13:41   ` Paolo Bonzini
2022-03-01 14:36 ` [PATCH v3 7/7] KVM: x86: SVM: allow AVIC to co-exist with a nested guest running Maxim Levitsky
2022-03-09 13:50   ` Paolo Bonzini
2022-03-09 18:14     ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b8794277078e9622c4e1d50f3ca55e785c643ddb.camel@redhat.com \
    --to=mlevitsk@redhat.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=tglx@linutronix.de \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®