From: Nicolai Buchwitz <nb@tipi-net.de>
To: "Théo Lebrun" <theo.lebrun@bootlin.com>
Cc: "Conor Dooley" <conor.dooley@microchip.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@kernel.org>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Paolo Valerio" <pvalerio@redhat.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Benoît Monin" <benoit.monin@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH net-next v7 1/3] net: macb: cache ENST config across link down/up
Date: Thu, 19 Nov 2026 12:49:44 +0100 [thread overview]
Message-ID: <b8bbd8e8078d9c27ccfaad2ac5001e42@tipi-net.de> (raw)
In-Reply-To: <20261118-macb-set-channels-v7-1-2dbc00f686af@bootlin.com>
On 18.11.2026 21:53, Théo Lebrun wrote:
> Currently, ENST is not explicitly restored across interface close/open.
> If HW keeps its register state then ENST is kept, otherwise it is lost;
> but we do not write the ENST schedule again on open.
>
> This causes trouble if the config is not compatible with the new open
> and link-up. The two issues that can occur are a link speed change (as
> all timings are configured in a unit relative to the link speed) or a
> change in the # of queues.
>
> The latter is the main reason we do this change before implementing
> ethtool -L support.
>
> If on link-up, the cached ENST config is invalid (link speed changed),
> then we drop the cached config, log a warning and explicitly override
> all ENST timings previously configured in the registers. If it is
> valid, we explicitly re-apply it.
>
> Take this opportunity to replace a kmalloc in
> macb_taprio_setup_replace() with a simple and tiny (104b) stack value.
>
> Drop the old hack of checking for pm_runtime_suspended(), which has
> little value because we could race with the runtime_suspend() call.
>
> Synchronise our config using the existing bp->mac_cfg_lock mutex, taken
> by macb_taprio_setup_replace() and macb_taprio_destroy(). To avoid an
> ABBA deadlock between bp->mac_cfg_lock and phydev->lock taken by
> phylink_ethtool_ksettings_get(), cache the link speed as
> bp->speed_mbps.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> [...]
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
next prev parent reply other threads:[~2026-11-19 11:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 20:53 [PATCH net-next v7 0/3] net: macb: implement ethtool set channels count operation Théo Lebrun
2026-11-18 20:53 ` [PATCH net-next v7 1/3] net: macb: cache ENST config across link down/up Théo Lebrun
2026-11-19 11:49 ` Nicolai Buchwitz [this message]
2026-11-19 12:36 ` Vineeth Karumanchi
2026-11-18 20:53 ` [PATCH net-next v7 2/3] net: macb: implement ethtool_ops.get|set_channels() Théo Lebrun
2026-11-19 11:54 ` Nicolai Buchwitz
2026-11-18 20:53 ` [PATCH net-next v7 3/3] net: macb: distribute evenly Tx SRAM segments Théo Lebrun
2026-11-19 11:45 ` Nicolai Buchwitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8bbd8e8078d9c27ccfaad2ac5001e42@tipi-net.de \
--to=nb@tipi-net.de \
--cc=andrew+netdev@lunn.ch \
--cc=benoit.monin@bootlin.com \
--cc=conor.dooley@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pvalerio@redhat.com \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®