mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
To: Depeng Shao <quic_depengs@quicinc.com>,
	rfoss@kernel.org, todor.too@gmail.com,
	bryan.odonoghue@linaro.org, mchehab@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, hverkuil@xs4all.nl
Cc: quic_eberman@quicinc.com, linux-media@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@quicinc.com,
	Yongsheng Li <quic_yon@quicinc.com>
Subject: Re: [PATCH v9 15/16] media: qcom: camss: Add CSID 780 support
Date: Wed, 22 Jan 2025 03:04:40 +0200	[thread overview]
Message-ID: <b9c51303-9f7d-409f-b052-640bc7bbf01b@linaro.org> (raw)
In-Reply-To: <20250113043133.1387162-16-quic_depengs@quicinc.com>

On 1/13/25 06:31, Depeng Shao wrote:
> The CSID in sm8550 is version 780, it has new register offset
> and new functionality. The buf done irq, register update and
> reset are moved to CSID 780.
> 
> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>   drivers/media/platform/qcom/camss/Makefile    |   1 +
>   .../platform/qcom/camss/camss-csid-780.c      | 337 ++++++++++++++++++
>   .../platform/qcom/camss/camss-csid-780.h      |  25 ++
>   .../media/platform/qcom/camss/camss-csid.h    |   1 +
>   drivers/media/platform/qcom/camss/camss.c     |  85 +++++
>   5 files changed, 449 insertions(+)
>   create mode 100644 drivers/media/platform/qcom/camss/camss-csid-780.c
>   create mode 100644 drivers/media/platform/qcom/camss/camss-csid-780.h
> 
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index e636968a1126..9a723e8712a2 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -7,6 +7,7 @@ qcom-camss-objs += \
>   		camss-csid-4-1.o \
>   		camss-csid-4-7.o \
>   		camss-csid-gen2.o \
> +		camss-csid-780.o \

Please keep the list sorted alphanumerically.

>   		camss-csiphy-2ph-1-0.o \
>   		camss-csiphy-3ph-1-0.o \
>   		camss-csiphy.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-csid-780.c b/drivers/media/platform/qcom/camss/camss-csid-780.c
> new file mode 100644
> index 000000000000..4c720d177731
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-csid-780.c
> @@ -0,0 +1,337 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
> + *
> + * Copyright (c) 2024 Qualcomm Technologies, Inc.
> + */
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +
> +#include "camss.h"
> +#include "camss-csid.h"
> +#include "camss-csid-780.h"
> +
> +#define CSID_IO_PATH_CFG0(csid)		(0x4 * (csid))
> +#define		OUTPUT_IFE_EN			0x100

BIT(8)

> +#define		INTERNAL_CSID			1

BIT(0)

> +
> +#define CSID_RST_CFG			0xC
> +#define		RST_MODE			BIT(0)
> +#define		RST_LOCATION			BIT(4)
> +
> +#define CSID_RST_CMD			0x10
> +#define		SELECT_HW_RST			BIT(0)
> +#define		SELECT_IRQ_RST			BIT(2)
> +
> +#define CSID_IRQ_CMD			0x14
> +#define		IRQ_CMD_CLEAR			BIT(0)
> +
> +#define CSID_RUP_AUP_CMD		0x18
> +#define		CSID_RUP_AUP_RDI(rdi)		((BIT(4) | BIT(20)) << (rdi))
> +
> +#define CSID_TOP_IRQ_STATUS		0x7C
> +#define		 TOP_IRQ_STATUS_RESET_DONE	BIT(0)
> +
> +#define CSID_TOP_IRQ_MASK		0x80
> +#define CSID_TOP_IRQ_CLEAR		0x84
> +#define CSID_TOP_IRQ_SET		0x88
> +
> +#define CSID_CSI2_RX_IRQ_STATUS		0x9C
> +#define CSID_CSI2_RX_IRQ_MASK		0xA0
> +#define CSID_CSI2_RX_IRQ_CLEAR		0xA4
> +#define CSID_CSI2_RX_IRQ_SET		0xA8
> +
> +#define CSID_BUF_DONE_IRQ_STATUS	0x8C
> +#define		BUF_DONE_IRQ_STATUS_RDI_OFFSET	(csid_is_lite(csid) ? 1 : 14)
> +#define CSID_BUF_DONE_IRQ_MASK		0x90
> +#define CSID_BUF_DONE_IRQ_CLEAR		0x94
> +#define CSID_BUF_DONE_IRQ_SET		0x98
> +
> +#define CSID_CSI2_RDIN_IRQ_STATUS(rdi)	(0xEC + 0x10 * (rdi))
> +#define		RUP_DONE_IRQ_STATUS		BIT(23)
> +
> +#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi)	(0xF4 + 0x10 * (rdi))
> +#define CSID_CSI2_RDIN_IRQ_SET(rdi)	(0xF8 + 0x10 * (rdi))
> +
> +#define CSID_CSI2_RX_CFG0		0x200
> +#define		CSI2_RX_CFG0_NUM_ACTIVE_LANES	0
> +#define		CSI2_RX_CFG0_DL0_INPUT_SEL	4
> +#define		CSI2_RX_CFG0_PHY_NUM_SEL	20
> +
> +#define CSID_CSI2_RX_CFG1		0x204
> +#define		CSI2_RX_CFG1_ECC_CORRECTION_EN	BIT(0)
> +#define		CSI2_RX_CFG1_VC_MODE		BIT(2)
> +
> +#define CSID_RDI_CFG0(rdi)		(0x500 + 0x100 * (rdi))
> +#define		RDI_CFG0_TIMESTAMP_EN		BIT(6)
> +#define		RDI_CFG0_TIMESTAMP_STB_SEL	BIT(8)
> +#define		RDI_CFG0_DECODE_FORMAT		12
> +#define		RDI_CFG0_DT			16
> +#define		RDI_CFG0_VC			22
> +#define		RDI_CFG0_DT_ID			27
> +#define		RDI_CFG0_EN			BIT(31)
> +
> +#define CSID_RDI_CTRL(rdi)		(0x504 + 0x100 * (rdi))
> +#define		RDI_CTRL_START_CMD		BIT(0)
> +
> +#define CSID_RDI_CFG1(rdi)		(0x510 + 0x100 * (rdi))
> +#define		RDI_CFG1_DROP_H_EN		BIT(5)
> +#define		RDI_CFG1_DROP_V_EN		BIT(6)
> +#define		RDI_CFG1_CROP_H_EN		BIT(7)
> +#define		RDI_CFG1_CROP_V_EN		BIT(8)
> +#define		RDI_CFG1_PIX_STORE		BIT(10)
> +#define		RDI_CFG1_PACKING_FORMAT_MIPI	BIT(15)
> +
> +#define CSID_RDI_IRQ_SUBSAMPLE_PATTERN(rdi)	(0x548 + 0x100 * (rdi))
> +#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi)	(0x54C + 0x100 * (rdi))
> +
> +#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX	1
> +
> +static void __csid_configure_rx(struct csid_device *csid,
> +				struct csid_phy_config *phy, int vc)
> +{
> +	int val;

u32 val;

> +
> +	val = (phy->lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
> +	val |= phy->lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
> +	val |= (phy->csiphy_id + CSI2_RX_CFG0_PHY_SEL_BASE_IDX) << CSI2_RX_CFG0_PHY_NUM_SEL;
> +
> +	writel(val, csid->base + CSID_CSI2_RX_CFG0);
> +
> +	val = CSI2_RX_CFG1_ECC_CORRECTION_EN;
> +	if (vc > 3)
> +		val |= CSI2_RX_CFG1_VC_MODE;
> +
> +	writel(val, csid->base + CSID_CSI2_RX_CFG1);
> +}
> +
> +static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
> +{
> +	int val = 0;

u32 val = enable ? RDI_CTRL_START_CMD : 0;

> +
> +	if (enable)
> +		val = RDI_CTRL_START_CMD;
> +
> +	writel(val, csid->base + CSID_RDI_CTRL(rdi));
> +}
> +
> +static void __csid_configure_wrapper(struct csid_device *csid)
> +{
> +	u32 val;
> +
> +	/* csid lite doesn't need to configure top register */
> +	if (csid->res->is_lite)
> +		return;
> +
> +	val = OUTPUT_IFE_EN | INTERNAL_CSID;
> +	writel(val, csid->camss->csid_wrapper_base + CSID_IO_PATH_CFG0(csid->id));
> +}
> +
> +static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
> +{
> +	u32 val;
> +	u8 lane_cnt = csid->phy.lane_cnt;
> +	/* Source pads matching RDI channels on hardware. Pad 1 -> RDI0, Pad 2 -> RDI1, etc. */
> +	struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
> +	const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
> +								   csid->res->formats->nformats,
> +								   input_format->code);
> +
> +	if (!lane_cnt)
> +		lane_cnt = 4;
> +
> +	/*
> +	 * DT_ID is a two bit bitfield that is concatenated with
> +	 * the four least significant bits of the five bit VC
> +	 * bitfield to generate an internal CID value.
> +	 *
> +	 * CSID_RDI_CFG0(vc)
> +	 * DT_ID : 28:27
> +	 * VC    : 26:22
> +	 * DT    : 21:16
> +	 *
> +	 * CID   : VC 3:0 << 2 | DT_ID 1:0
> +	 */
> +	u8 dt_id = vc & 0x03;

Here is a misplaced local variable declaration.

> +
> +	val = RDI_CFG0_TIMESTAMP_EN;
> +	val |= RDI_CFG0_TIMESTAMP_STB_SEL;
> +	/* note: for non-RDI path, this should be format->decode_format */
> +	val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
> +	val |= vc << RDI_CFG0_VC;
> +	val |= format->data_type << RDI_CFG0_DT;
> +	val |= dt_id << RDI_CFG0_DT_ID;
> +
> +	writel(val, csid->base + CSID_RDI_CFG0(vc));
> +
> +	val = RDI_CFG1_PACKING_FORMAT_MIPI;
> +	val |= RDI_CFG1_PIX_STORE;
> +	val |= RDI_CFG1_DROP_H_EN;
> +	val |= RDI_CFG1_DROP_V_EN;
> +	val |= RDI_CFG1_CROP_H_EN;
> +	val |= RDI_CFG1_CROP_V_EN;
> +
> +	writel(val, csid->base + CSID_RDI_CFG1(vc));
> +
> +	val = 0;
> +	writel(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(vc));
> +
> +	val = 1;
> +	writel(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(vc));
> +
> +	val = 0;
> +	writel(val, csid->base + CSID_RDI_CTRL(vc));
> +
> +	val = readl(csid->base + CSID_RDI_CFG0(vc));
> +
> +	if (enable)
> +		val |= RDI_CFG0_EN;
> +	writel(val, csid->base + CSID_RDI_CFG0(vc));
> +}
> +
> +static void csid_configure_stream(struct csid_device *csid, u8 enable)
> +{
> +	u8 i;
> +
> +	__csid_configure_wrapper(csid);
> +
> +	/* Loop through all enabled VCs and configure stream for each */
> +	for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
> +		if (csid->phy.en_vc & BIT(i)) {
> +			__csid_configure_rdi_stream(csid, enable, i);
> +			__csid_configure_rx(csid, &csid->phy, i);
> +			__csid_ctrl_rdi(csid, enable, i);
> +		}
> +}
> +
> +static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
> +{
> +	return 0;
> +}
> +
> +static void csid_subdev_reg_update(struct csid_device *csid, int port_id, bool clear)
> +{
> +	if (clear) {
> +		csid->reg_update &= ~CSID_RUP_AUP_RDI(port_id);
> +	} else {
> +		csid->reg_update |= CSID_RUP_AUP_RDI(port_id);
> +		writel(csid->reg_update, csid->base + CSID_RUP_AUP_CMD);
> +	}
> +}
> +
> +/*
> + * csid_isr - CSID module interrupt service routine
> + * @irq: Interrupt line
> + * @dev: CSID device
> + *
> + * Return IRQ_HANDLED on success
> + */
> +static irqreturn_t csid_isr(int irq, void *dev)
> +{
> +	struct csid_device *csid = dev;
> +	u32 val, buf_done_val;
> +	u8 reset_done;
> +	int i;
> +
> +	val = readl(csid->base + CSID_TOP_IRQ_STATUS);
> +	writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
> +	reset_done = val & TOP_IRQ_STATUS_RESET_DONE;
> +
> +	val = readl(csid->base + CSID_CSI2_RX_IRQ_STATUS);
> +	writel(val, csid->base + CSID_CSI2_RX_IRQ_CLEAR);
> +
> +	buf_done_val = readl(csid->base + CSID_BUF_DONE_IRQ_STATUS);
> +	writel(buf_done_val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
> +
> +	/* Read and clear IRQ status for each enabled RDI channel */
> +	for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
> +		if (csid->phy.en_vc & BIT(i)) {
> +			val = readl(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i));
> +			writel(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
> +
> +			if (val & RUP_DONE_IRQ_STATUS)
> +				/* clear the reg update bit */
> +				csid_subdev_reg_update(csid, i, true);
> +
> +			if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i)) {
> +				/*
> +				 * For Titan 780, bus done and RUP IRQ have been moved to
> +				 * CSID from VFE. Once CSID received bus done, need notify
> +				 * VFE of this event. Trigger VFE to handle bus done process.
> +				 */
> +				camss_buf_done(csid->camss, csid->id, i);
> +			}
> +		}
> +
> +	val = IRQ_CMD_CLEAR;
> +	writel(val, csid->base + CSID_IRQ_CMD);
> +
> +	if (reset_done)
> +		complete(&csid->reset_complete);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/*
> + * csid_reset - Trigger reset on CSID module and wait to complete
> + * @csid: CSID device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int csid_reset(struct csid_device *csid)
> +{
> +	unsigned long time;
> +	u32 val;
> +	int i;
> +
> +	reinit_completion(&csid->reset_complete);
> +
> +	writel(1, csid->base + CSID_TOP_IRQ_CLEAR);
> +	writel(1, csid->base + CSID_IRQ_CMD);
> +	writel(1, csid->base + CSID_TOP_IRQ_MASK);
> +
> +	for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
> +		if (csid->phy.en_vc & BIT(i)) {
> +			writel(BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i),
> +			       csid->base + CSID_BUF_DONE_IRQ_CLEAR);
> +			writel(IRQ_CMD_CLEAR, csid->base + CSID_IRQ_CMD);
> +			writel(BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i),
> +			       csid->base + CSID_BUF_DONE_IRQ_MASK);
> +		}
> +
> +	/* preserve registers */
> +	val = RST_LOCATION | RST_MODE;
> +	writel(val, csid->base + CSID_RST_CFG);
> +
> +	val = SELECT_HW_RST | SELECT_IRQ_RST;
> +	writel(val, csid->base + CSID_RST_CMD);
> +
> +	time = wait_for_completion_timeout(&csid->reset_complete,
> +					   msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
> +	if (!time) {
> +		dev_err(csid->camss->dev, "CSID reset timeout\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static void csid_subdev_init(struct csid_device *csid)
> +{
> +	csid->testgen.nmodes = CSID_PAYLOAD_MODE_DISABLED;
> +}
> +
> +const struct csid_hw_ops csid_ops_780 = {
> +	.configure_stream = csid_configure_stream,
> +	.configure_testgen_pattern = csid_configure_testgen_pattern,
> +	.hw_version = csid_hw_version,
> +	.isr = csid_isr,
> +	.reset = csid_reset,
> +	.src_pad_code = csid_src_pad_code,
> +	.subdev_init = csid_subdev_init,
> +	.reg_update = csid_subdev_reg_update,
> +};
> diff --git a/drivers/media/platform/qcom/camss/camss-csid-780.h b/drivers/media/platform/qcom/camss/camss-csid-780.h
> new file mode 100644
> index 000000000000..a990c66a60ff
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-csid-780.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * camss-csid-780.h
> + *
> + * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module Generation 3
> + *
> + * Copyright (c) 2024 Qualcomm Technologies, Inc.
> + */
> +#ifndef __QC_MSM_CAMSS_CSID_780_H__
> +#define __QC_MSM_CAMSS_CSID_780_H__
> +
> +#define DECODE_FORMAT_UNCOMPRESSED_8_BIT	0x1
> +#define DECODE_FORMAT_UNCOMPRESSED_10_BIT	0x2
> +#define DECODE_FORMAT_UNCOMPRESSED_12_BIT	0x3
> +#define DECODE_FORMAT_UNCOMPRESSED_14_BIT	0x4
> +#define DECODE_FORMAT_UNCOMPRESSED_16_BIT	0x5
> +#define DECODE_FORMAT_UNCOMPRESSED_20_BIT	0x6
> +#define DECODE_FORMAT_UNCOMPRESSED_24_BIT	0x7
> +#define DECODE_FORMAT_PAYLOAD_ONLY		0xf
> +
> +#define PLAIN_FORMAT_PLAIN8	0x0 /* supports DPCM, UNCOMPRESSED_6/8_BIT */
> +#define PLAIN_FORMAT_PLAIN16	0x1 /* supports DPCM, UNCOMPRESSED_10/16_BIT */
> +#define PLAIN_FORMAT_PLAIN32	0x2 /* supports UNCOMPRESSED_20_BIT */
> +
> +#endif /* __QC_MSM_CAMSS_CSID_780_H__ */
> diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
> index 4f8765c251bc..659ffb8bb7d5 100644
> --- a/drivers/media/platform/qcom/camss/camss-csid.h
> +++ b/drivers/media/platform/qcom/camss/camss-csid.h
> @@ -237,6 +237,7 @@ extern const struct csid_formats csid_formats_gen2;
>   extern const struct csid_hw_ops csid_ops_4_1;
>   extern const struct csid_hw_ops csid_ops_4_7;
>   extern const struct csid_hw_ops csid_ops_gen2;
> +extern const struct csid_hw_ops csid_ops_780;

Please keep the list sorted alphanumerically.

>   
>   /*
>    * csid_is_lite - Check if CSID is CSID lite.
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 80f8b77547a1..e9519fb99f06 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -2045,6 +2045,88 @@ static const struct camss_subdev_resources csiphy_res_8550[] = {
>   	}
>   };
>   
> +static const struct resources_wrapper csid_wrapper_res_sm8550 = {
> +	.reg = "csid_wrapper",
> +};
> +
> +static const struct camss_subdev_resources csid_res_8550[] = {
> +	/* CSID0 */
> +	{
> +		.regulators = {},
> +		.clock = { "csid", "csiphy_rx" },
> +		.clock_rate = { { 400000000, 480000000 },
> +				{ 400000000, 480000000 } },
> +		.reg = { "csid0" },
> +		.interrupt = { "csid0" },
> +		.csid = {
> +			.is_lite = false,
> +			.parent_dev_ops = &vfe_parent_dev_ops,
> +			.hw_ops = &csid_ops_780,
> +			.formats = &csid_formats_gen2
> +		}
> +	},
> +	/* CSID1 */
> +	{
> +		.regulators = {},
> +		.clock = { "csid", "csiphy_rx" },
> +		.clock_rate = { { 400000000, 480000000 },
> +				{ 400000000, 480000000 } },
> +		.reg = { "csid1" },
> +		.interrupt = { "csid1" },
> +		.csid = {
> +			.is_lite = false,
> +			.parent_dev_ops = &vfe_parent_dev_ops,
> +			.hw_ops = &csid_ops_780,
> +			.formats = &csid_formats_gen2
> +		}
> +	},
> +	/* CSID2 */
> +	{
> +		.regulators = {},
> +		.clock = { "csid", "csiphy_rx" },
> +		.clock_rate = { { 400000000, 480000000 },
> +				{ 400000000, 480000000 } },
> +		.reg = { "csid2" },
> +		.interrupt = { "csid2" },
> +		.csid = {
> +			.is_lite = false,
> +			.parent_dev_ops = &vfe_parent_dev_ops,
> +			.hw_ops = &csid_ops_780,
> +			.formats = &csid_formats_gen2
> +		}
> +	},
> +	/* CSID3 */
> +	{
> +		.regulators = {},
> +		.clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
> +		.clock_rate = { { 400000000, 480000000 },
> +				{ 400000000, 480000000 } },
> +		.reg = { "csid_lite0" },
> +		.interrupt = { "csid_lite0" },
> +		.csid = {
> +			.is_lite = true,
> +			.parent_dev_ops = &vfe_parent_dev_ops,
> +			.hw_ops = &csid_ops_780,
> +			.formats = &csid_formats_gen2
> +		}
> +	},
> +	/* CSID4 */
> +	{
> +		.regulators = {},
> +		.clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
> +		.clock_rate = { { 400000000, 480000000 },
> +				{ 400000000, 480000000 } },
> +		.reg = { "csid_lite1" },
> +		.interrupt = { "csid_lite1" },
> +		.csid = {
> +			.is_lite = true,
> +			.parent_dev_ops = &vfe_parent_dev_ops,
> +			.hw_ops = &csid_ops_780,
> +			.formats = &csid_formats_gen2
> +		}
> +	}
> +};
> +
>   static const struct resources_icc icc_res_sm8550[] = {
>   	{
>   		.name = "ahb",
> @@ -3098,9 +3180,12 @@ static const struct camss_resources sm8550_resources = {
>   	.version = CAMSS_8550,
>   	.pd_name = "top",
>   	.csiphy_res = csiphy_res_8550,
> +	.csid_res = csid_res_8550,
> +	.csid_wrapper_res = &csid_wrapper_res_sm8550,
>   	.icc_res = icc_res_sm8550,
>   	.icc_path_num = ARRAY_SIZE(icc_res_sm8550),
>   	.csiphy_num = ARRAY_SIZE(csiphy_res_8550),
> +	.csid_num = ARRAY_SIZE(csid_res_8550),
>   	.link_entities = camss_link_entities
>   };
>   

--
Best wishes,
Vladimir

  reply	other threads:[~2025-01-22  1:04 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-13  4:31 [PATCH v9 00/16] media: qcom: camss: Add sm8550 support Depeng Shao
2025-01-13  4:31 ` [PATCH v9 01/16] media: qcom: camss: csiphy-3ph: Fix trivial indentation fault in defines Depeng Shao
2025-01-13  4:31 ` [PATCH v9 02/16] media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence control loop Depeng Shao
2025-01-13  4:31 ` [PATCH v9 03/16] media: qcom: camss: csiphy-3ph: Rename struct Depeng Shao
2025-01-13  4:31 ` [PATCH v9 04/16] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices Depeng Shao
2025-01-13  4:31 ` [PATCH v9 05/16] media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct Depeng Shao
2025-01-13  4:31 ` [PATCH v9 06/16] media: qcom: camss: csiphy-3ph: Use an offset variable to find common control regs Depeng Shao
2025-01-13  4:31 ` [PATCH v9 07/16] media: qcom: camss: csid: Move common code into csid core Depeng Shao
2025-01-13  4:31 ` [PATCH v9 08/16] media: qcom: camss: vfe: Move common code into vfe core Depeng Shao
2025-01-13  4:31 ` [PATCH v9 09/16] media: qcom: camss: Add callback API for RUP update and buf done Depeng Shao
2025-01-13  4:31 ` [PATCH v9 10/16] media: qcom: camss: Add default case in vfe_src_pad_code Depeng Shao
2025-01-13  4:31 ` [PATCH v9 11/16] media: qcom: camss: csid: Only add TPG v4l2 ctrl if TPG hardware is available Depeng Shao
2025-01-13  4:31 ` [PATCH v9 12/16] dt-bindings: media: camss: Add qcom,sm8550-camss binding Depeng Shao
2025-01-13  4:31 ` [PATCH v9 13/16] media: qcom: camss: Add sm8550 compatible Depeng Shao
2025-01-13  4:31 ` [PATCH v9 14/16] media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2 DPHY support Depeng Shao
2025-01-22  1:09   ` Vladimir Zapolskiy
2025-01-13  4:31 ` [PATCH v9 15/16] media: qcom: camss: Add CSID 780 support Depeng Shao
2025-01-22  1:04   ` Vladimir Zapolskiy [this message]
2025-01-13  4:31 ` [PATCH v9 16/16] media: qcom: camss: Add support for VFE 780 Depeng Shao
2025-01-22  1:15   ` Vladimir Zapolskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b9c51303-9f7d-409f-b052-640bc7bbf01b@linaro.org \
    --to=vladimir.zapolskiy@linaro.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil@xs4all.nl \
    --cc=kernel@quicinc.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=quic_depengs@quicinc.com \
    --cc=quic_eberman@quicinc.com \
    --cc=quic_yon@quicinc.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®