From: Rakib Mullick <rakib.mullick@gmail.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>,
akpm@linux-foundation.org, linux-kernel@vger.kernel.org
Subject: [PATCH] x86,APIC: Detect lapic_is_integrated() once - use on and on.
Date: Fri, 22 May 2009 19:31:29 +0600 [thread overview]
Message-ID: <b9df5fa10905220631y7b1a094dn9a6e13de1b9c43af@mail.gmail.com> (raw)
Impact: Reduce text space through efficient coding
Determine apic is integrated or not - by calling
lapic_is_integrated() once from APIC_init_uniprocessor() and keep it
in a variable integrated_lapic. Thus we can determine apic is
integrated or not, by checking the variable instead of calling
lapic_is_integrated() on and on. Marking lapic_is_integrated() as
__init, which reduces some text space. Also allows us to get away from
messy #ifdef and inline.
---
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
--- linus/arch/x86/kernel/apic/apic.c 2009-05-21 22:22:15.000000000 +0600
+++ rakib/arch/x86/kernel/apic/apic.c 2009-05-21 23:27:26.000000000 +0600
@@ -127,6 +127,9 @@ early_param("nox2apic", setup_nox2apic);
unsigned long mp_lapic_addr;
int disable_apic;
+
+static int integrated_lapic;
+
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
static int disable_apic_timer __cpuinitdata;
/* Local APIC timer works in C2 */
@@ -188,13 +191,12 @@ static inline int lapic_get_version(void
/*
* Check, if the APIC is integrated or a separate chip
*/
-static inline int lapic_is_integrated(void)
+void __init lapic_is_integrated(void)
{
-#ifdef CONFIG_X86_64
- return 1;
-#else
- return APIC_INTEGRATED(lapic_get_version());
-#endif
+ if (APIC_INTEGRATED(lapic_get_version()))
+ integrated_lapic = 1;
+ else
+ integrated_lapic = 0;
}
/*
@@ -258,7 +260,7 @@ void __cpuinit enable_NMI_through_LVT0(v
v = APIC_DM_NMI;
/* Level triggered for 82489DX (32bit mode) */
- if (!lapic_is_integrated())
+ if (!integrated_lapic)
v |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT0, v);
@@ -313,7 +315,7 @@ static void __setup_APIC_LVTT(unsigned i
lvtt_value = LOCAL_TIMER_VECTOR;
if (!oneshot)
lvtt_value |= APIC_LVT_TIMER_PERIODIC;
- if (!lapic_is_integrated())
+ if (!integrated_lapic)
lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
if (!irqen)
@@ -869,7 +871,7 @@ void clear_local_APIC(void)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
/* Integrated APIC (!82489DX) ? */
- if (lapic_is_integrated()) {
+ if (integrated_lapic) {
if (maxlvt > 3)
/* Clear ESR due to Pentium errata 3AP and 11AP */
apic_write(APIC_ESR, 0);
@@ -1064,7 +1066,7 @@ void __init init_bsp_APIC(void)
*/
apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
- if (!lapic_is_integrated()) /* 82489DX */
+ if (!integrated_lapic) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
}
@@ -1073,7 +1075,7 @@ static void __cpuinit lapic_setup_esr(vo
{
unsigned int oldvalue, value, maxlvt;
- if (!lapic_is_integrated()) {
+ if (!integrated_lapic) {
pr_info("No ESR for 82489DX.\n");
return;
}
@@ -1126,7 +1128,7 @@ void __cpuinit setup_local_APIC(void)
#ifdef CONFIG_X86_32
/* Pound the ESR really hard over the head with a big hammer - mbligh */
- if (lapic_is_integrated() && apic->disable_esr) {
+ if (integrated_lapic && apic->disable_esr) {
apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
@@ -1251,7 +1253,7 @@ void __cpuinit setup_local_APIC(void)
value = APIC_DM_NMI;
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
- if (!lapic_is_integrated()) /* 82489DX */
+ if (!integrated_lapic) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
@@ -1585,6 +1587,8 @@ int __init APIC_init_uniprocessor(void)
pr_info("Apic disabled by BIOS\n");
return -1;
}
+ /* Since CONFIG_X86_64, so it's integrated. */
+ integrated_lapic = 1;
#else
if (!smp_found_config && !cpu_has_apic)
return -1;
@@ -1599,6 +1603,8 @@ int __init APIC_init_uniprocessor(void)
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
return -1;
}
+ /* Determine APIC is integrated or not */
+ lapic_is_integrated();
#endif
enable_IR_x2apic();
next reply other threads:[~2009-05-22 13:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-22 13:31 Rakib Mullick [this message]
2009-05-22 20:02 ` Cyrill Gorcunov
2009-05-22 20:12 ` H. Peter Anvin
2009-05-22 20:21 ` Cyrill Gorcunov
2009-05-22 20:23 ` H. Peter Anvin
2009-05-22 20:30 ` Cyrill Gorcunov
2009-05-22 20:35 ` Cyrill Gorcunov
2009-05-22 20:59 ` H. Peter Anvin
2009-05-22 22:18 ` Maciej W. Rozycki
2009-05-23 13:07 ` Cyrill Gorcunov
2009-05-22 20:33 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b9df5fa10905220631y7b1a094dn9a6e13de1b9c43af@mail.gmail.com \
--to=rakib.mullick@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gorcunov@openvz.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®