Re: [PATCH net-next v11 13/14] dpll: zl3073x: Add support to get/set frequency on input pins

[Vadim Fedorenko <vadim.fedorenko@linux.dev>]

On 19/06/2025 12:15, Paolo Abeni wrote:
> On 6/16/25 10:14 PM, Ivan Vecera wrote:
>> +/**
>> + * zl3073x_dpll_input_ref_frequency_get - get input reference frequency
>> + * @zldpll: pointer to zl3073x_dpll
>> + * @ref_id: reference id
>> + * @frequency: pointer to variable to store frequency
>> + *
>> + * Reads frequency of given input reference.
>> + *
>> + * Return: 0 on success, <0 on error
>> + */
>> +static int
>> +zl3073x_dpll_input_ref_frequency_get(struct zl3073x_dpll *zldpll, u8 ref_id,
>> +				     u32 *frequency)
>> +{
>> +	struct zl3073x_dev *zldev = zldpll->dev;
>> +	u16 base, mult, num, denom;
>> +	int rc;
>> +
>> +	guard(mutex)(&zldev->multiop_lock);
>> +
>> +	/* Read reference configuration */
>> +	rc = zl3073x_mb_op(zldev, ZL_REG_REF_MB_SEM, ZL_REF_MB_SEM_RD,
>> +			   ZL_REG_REF_MB_MASK, BIT(ref_id));
>> +	if (rc)
>> +		return rc;
>> +
>> +	/* Read registers to compute resulting frequency */
>> +	rc = zl3073x_read_u16(zldev, ZL_REG_REF_FREQ_BASE, &base);
>> +	if (rc)
>> +		return rc;
>> +	rc = zl3073x_read_u16(zldev, ZL_REG_REF_FREQ_MULT, &mult);
>> +	if (rc)
>> +		return rc;
>> +	rc = zl3073x_read_u16(zldev, ZL_REG_REF_RATIO_M, &num);
>> +	if (rc)
>> +		return rc;
>> +	rc = zl3073x_read_u16(zldev, ZL_REG_REF_RATIO_N, &denom);
>> +	if (rc)
>> +		return rc;
>> +
>> +	/* Sanity check that HW has not returned zero denominator */
>> +	if (!denom) {
>> +		dev_err(zldev->dev,
>> +			"Zero divisor for ref %u frequency got from device\n",
>> +			ref_id);
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* Compute the frequency */
>> +	*frequency = base * mult * num / denom;
> 
> As base, mult, num and denom are u16, the above looks like integer
> overflow prone.
> 
> I think you should explicitly cast to u64, and possibly use a u64 frequency.

I might be a good idea to use mul_u64_u32_div together with mul_u32_u32?
These macroses will take care of overflow on 32bit platforms as well.

> 
> /P
>