Re: [PATCH] usb: dwc3: Fix ep0 handling when getting reset while doing control transfer

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

Thinh Nguyen wrote:

> Mayank Rana wrote:
>> @@ -3766,6 +3768,27 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
>>  	}
>>  
>>  	dwc3_reset_gadget(dwc);
>> +
>> +	/*
>> +	 * From SNPS databook section 8.1.2, the EP0 should be in setup
>> +	 * phase. So ensure that EP0 is in setup phase by issuing a stall
>> +	 * and restart if EP0 is not in setup phase.
>> +	 */
> 
> We should not issue End Transfer to control endpoint unless it's error
> case such as invalid direction. The databook also specify under section
> USB reset initialization to not send End Transfer to control endpoint.
> 
>> +	if (dwc->ep0state != EP0_SETUP_PHASE) {
>> +		unsigned int	dir;
>> +
>> +		dir = !!dwc->ep0_expect_in;
>> +		if (dwc->ep0state == EP0_DATA_PHASE)
>> +			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
>> +		else
>> +			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);

On second thought, it seems cleaner to do this though the behavior is
undefined.

Do you have the driver tracepoint log capture of this scenario? It'd be
great if I can also review it.

Thanks!
Thinh