mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
To: Heiner Kallweit <hkallweit1@gmail.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"npiggin@gmail.com" <npiggin@gmail.com>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: Re: [PATCH] spi: fsl-espi: Only process interrupts for expected events
Date: Wed, 23 Sep 2020 21:01:18 +0000	[thread overview]
Message-ID: <baac170f-4729-0519-2dca-fd8e90eba5fb@alliedtelesis.co.nz> (raw)
In-Reply-To: <ec77cf82-5ef1-c650-3e8a-80be749c2214@gmail.com>


On 24/09/20 8:27 am, Heiner Kallweit wrote:
> On 04.09.2020 02:28, Chris Packham wrote:
>> The SPIE register contains counts for the TX FIFO so any time the irq
>> handler was invoked we would attempt to process the RX/TX fifos. Use the
>> SPIM value to mask the events so that we only process interrupts that
>> were expected.
>>
>> This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
>> Implement soft interrupt replay in C").
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> Cc: stable@vger.kernel.org
>> ---
>>
>> Notes:
>>      I've tested this on a T2080RDB and a custom board using the T2081 SoC. With
>>      this change I don't see any spurious instances of the "Transfer done but
>>      SPIE_DON isn't set!" or "Transfer done but rx/tx fifo's aren't empty!" messages
>>      and the updates to spi flash are successful.
>>      
>>      I think this should go into the stable trees that contain 3282a3da25bd but I
>>      haven't added a Fixes: tag because I think 3282a3da25bd exposed the issue as
>>      opposed to causing it.
>>
>>   drivers/spi/spi-fsl-espi.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
>> index 7e7c92cafdbb..cb120b68c0e2 100644
>> --- a/drivers/spi/spi-fsl-espi.c
>> +++ b/drivers/spi/spi-fsl-espi.c
>> @@ -574,13 +574,14 @@ static void fsl_espi_cpu_irq(struct fsl_espi *espi, u32 events)
>>   static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
>>   {
>>   	struct fsl_espi *espi = context_data;
>> -	u32 events;
>> +	u32 events, mask;
>>   
>>   	spin_lock(&espi->lock);
>>   
>>   	/* Get interrupt events(tx/rx) */
>>   	events = fsl_espi_read_reg(espi, ESPI_SPIE);
>> -	if (!events) {
>> +	mask = fsl_espi_read_reg(espi, ESPI_SPIM);
>> +	if (!(events & mask)) {
>>   		spin_unlock(&espi->lock);
>>   		return IRQ_NONE;
> Sorry, I was on vacation and therefore couldn't comment earlier.
> I'm fine with the change, just one thing could be improved IMO.
> If we skip an unneeded interrupt now, then returning IRQ_NONE
> causes reporting this interrupt as spurious. This isn't too nice
> as spurious interrupts typically are seen as a problem indicator.
> Therefore returning IRQ_HANDLED should be more appropriate.
> This would just require a comment in the code explaining why we
> do this, and why it can happen that we receive interrupts
> we're not interested in.
I'd be happy to send a follow-up to change IRQ_NONE to IRQ_HANDLED. I 
don't think the old code could have ever hit the IRQ_NONE (because event 
will always be non-zero) so it won't really be a change in behaviour. 
With the patch (that is now in spi/for-next) so far I do see a low 
number of spurious interrupts on the test setup where previously I would 
have seen failure to talk to the spi-flash.

      reply	other threads:[~2020-09-23 21:01 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-04  0:28 Chris Packham
2020-09-13 22:03 ` Chris Packham
2020-09-14  2:28   ` Nicholas Piggin
2020-09-14  9:06     ` Joakim Tjernlund
2020-09-21 21:40 ` Mark Brown
2020-09-23 20:27 ` Heiner Kallweit
2020-09-23 21:01   ` Chris Packham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=baac170f-4729-0519-2dca-fd8e90eba5fb@alliedtelesis.co.nz \
    --to=chris.packham@alliedtelesis.co.nz \
    --cc=broonie@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=npiggin@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®