From: Matti Vaittinen <mazziesaccount@gmail.com>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Nuno Sa <nuno.sa@analog.com>,
David Lechner <dlechner@baylibre.com>,
Javier Carrasco <javier.carrasco.cruz@gmail.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] iio: adc: ti-adc128s052: Fix ADC value on BE systems
Date: Mon, 31 Mar 2025 11:02:55 +0300 [thread overview]
Message-ID: <babe1eac3de30aa22e09266de1f5521fa9e0decd.1742474322.git.mazziesaccount@gmail.com> (raw)
In-Reply-To: <cover.1742474322.git.mazziesaccount@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1857 bytes --]
ADCs supported by the ti-adc128s052 driver do return the ADC data in 16
bits using big-endian format. The driver does unconditionally swap the
bytes. This leads to wrong values being reported to users on big endian
systems.
Fix this by using the be16_to_cpu() instead of doing unconditional byte
swapping.
Fixes: 913b86468674 ("iio: adc: Add TI ADC128S052")
Cc: stable@vger.kernel.org
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
I have no big endian machines on my hands to test this. Problem was
spotted by reading the code, which leaves some room for errors.
Careful reviewing is appreciated!
---
drivers/iio/adc/ti-adc128s052.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index a456ea78462f..d1e31122ea0d 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -28,19 +28,20 @@ struct adc128 {
struct regulator *reg;
struct mutex lock;
- u8 buffer[2] __aligned(IIO_DMA_MINALIGN);
+ __be16 buffer __aligned(IIO_DMA_MINALIGN);
};
static int adc128_adc_conversion(struct adc128 *adc, u8 channel)
{
int ret;
+ char *msg = (char *)&adc->buffer;
- mutex_lock(&adc->lock);
+ msg[0] = channel << 3;
+ msg[1] = 0;
- adc->buffer[0] = channel << 3;
- adc->buffer[1] = 0;
+ mutex_lock(&adc->lock);
- ret = spi_write(adc->spi, &adc->buffer, 2);
+ ret = spi_write(adc->spi, msg, 2);
if (ret < 0) {
mutex_unlock(&adc->lock);
return ret;
@@ -53,7 +54,7 @@ static int adc128_adc_conversion(struct adc128 *adc, u8 channel)
if (ret < 0)
return ret;
- return ((adc->buffer[0] << 8 | adc->buffer[1]) & 0xFFF);
+ return be16_to_cpu(adc->buffer) & 0xFFF;
}
static int adc128_read_raw(struct iio_dev *indio_dev,
--
2.48.1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2025-03-31 8:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-31 8:01 [PATCH 0/6] Support ROHM BD79104 ADC Matti Vaittinen
2025-03-31 8:02 ` [PATCH 1/6] dt-bindings: " Matti Vaittinen
2025-03-31 15:47 ` Conor Dooley
2025-03-31 8:02 ` Matti Vaittinen [this message]
2025-03-31 11:11 ` [PATCH 2/6] iio: adc: ti-adc128s052: Fix ADC value on BE systems Jonathan Cameron
2025-03-31 12:07 ` Matti Vaittinen
2025-03-31 8:03 ` [PATCH 3/6] iio: adc: ti-adc128s052: Be consistent with arrays Matti Vaittinen
2025-03-31 11:13 ` Jonathan Cameron
2025-03-31 8:03 ` [PATCH 4/6] iio: adc: ti-adc128s052: Use devm_mutex_init() Matti Vaittinen
2025-03-31 11:13 ` Jonathan Cameron
2025-03-31 8:03 ` [PATCH 5/6] iio: adc: ti-adc128s052: Simplify using guard(mutex) Matti Vaittinen
2025-03-31 11:14 ` Jonathan Cameron
2025-03-31 8:03 ` [PATCH 6/6] iio: adc: ti-adc128s052: Support ROHM BD79104 Matti Vaittinen
2025-03-31 11:22 ` Jonathan Cameron
2025-04-01 12:33 ` Matti Vaittinen
2025-04-05 17:43 ` Jonathan Cameron
2025-04-07 6:10 ` Matti Vaittinen
2025-04-07 18:44 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=babe1eac3de30aa22e09266de1f5521fa9e0decd.1742474322.git.mazziesaccount@gmail.com \
--to=mazziesaccount@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=javier.carrasco.cruz@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®