Re: (subset) [PATCH v3 0/9] Use correct LDO5 control registers for PCA9450

[Frieder Schrempf <frieder.schrempf@kontron.de>]

Hi Mark,

On 03.02.25 8:57 PM, Mark Brown wrote:
> On Wed, 18 Dec 2024 16:27:23 +0100, Frieder Schrempf wrote:
>> This is a follow-up of [1].
>>
>> The main objective of this is to fix the PCA9450 driver to
>> use the correct control register for the LDO5 regulator.
>>
>> Currently the control register to use for LDO5 is hardcoded to
>> LDO5CTRL_H. This is wrong for two reasons:
>>
>> [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
> 
> Thanks!
> 
> [1/9] dt-bindings: regulator: pca9450: Add properties for handling LDO5
>       commit: f9cbf56b0a1966d977df87d15a5bdbff2c342062
> [2/9] arm64: dts: imx8mp-skov-reva: Use hardware signal for SD card VSELECT
>       commit: b5ec74c2aec76fbdff9bc16951455602e11902bf
> [3/9] Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
>       commit: c73be62caabbec6629689c705aea65e5ce364d5d
> [4/9] regulator: pca9450: Fix control register for LDO5
>       commit: 3ce6f4f943ddd9edc03e450a2a0d89cb025b165b
> [5/9] regulator: pca9450: Fix enable register for LDO5
>       commit: f5aab0438ef17f01c5ecd25e61ae6a03f82a4586
> 

Thanks for picking up these patches. Meanwhile Shawn has applied patch 2
and 7-9 on his side. What about patch 6? Is there a specific reason why
this was left out?

Thanks
Frieder