From: Fernando Fernandez Mancera <fmancera@suse.de>
To: Jiayuan Chen <jiayuan.chen@linux.dev>, netdev@vger.kernel.org
Cc: stable@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>, David Ahern <dsahern@kernel.org>,
Ido Schimmel <idosch@nvidia.com>,
Kuniyuki Iwashima <kuniyu@google.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Joel Granados <joel.granados@kernel.org>,
Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>,
Wyatt Feng <bronzed_45_vested@icloud.com>,
Yung Chih Su <yuuchihsu@gmail.com>,
Flavio Leitner <fbl@redhat.com>,
Hannes Frederic Sowa <hannes@stressinduktion.org>,
"Paul E. McKenney" <paulmck@kernel.org>,
Petr Mladek <pmladek@suse.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/5] ipv6: restrict gc_elasticity to 31
Date: Fri, 23 Oct 2026 15:31:22 +0200 [thread overview]
Message-ID: <bb1fc73c-84b3-45a8-86e4-458498d0f80b@suse.de> (raw)
In-Reply-To: <20261023091419.167088-2-jiayuan.chen@linux.dev>
On 10/23/26 11:13 AM, Jiayuan Chen wrote:
> Every counted IPv6 dst allocation runs ip6_dst_gc() once the number of
> live dst goes over gc_thresh (1024 by default). ip6_dst_gc() decays
> ip6_rt_gc_expire by gc_elasticity: the smaller gc_elasticity is, the
> smaller ip6_rt_gc_expire gets, i.e. the more aggressive the gc.
>
> ip6_rt_gc_expire is a u32, but gc_elasticity has no upper bound, so
> writing >= 32 shifts a 32-bit value by >= 32 bits, which is UB:
>
> val = atomic_read(&net->ipv6.ip6_rt_gc_expire);
> atomic_set(&net->ipv6.ip6_rt_gc_expire, val - (val >> rt_elasticity));
>
> UBSAN: shift-out-of-bounds in net/ipv6/route.c:3369:53
> shift exponent 32 is too large for 32-bit type 'unsigned int'
> CPU: 2 UID: 0 PID: 615 Comm: ping6 Not tainted 7.3.0-rc7+ #364 PREEMPT
> Call Trace:
> <IRQ>
> dump_stack_lvl+0xc1/0xf0
> dump_stack+0x10/0x20
> __ubsan_handle_shift_out_of_bounds+0x1d1/0x390
> ip6_dst_gc.cold+0x15/0x1a
> dst_alloc+0x4e0/0x620
> ip6_rt_cache_alloc+0x189/0x7e0
> __ip6_rt_update_pmtu+0x68e/0x1160
> ip6_update_pmtu+0x30c/0x3a0
> icmpv6_err+0x1fa/0x330
> icmpv6_notify+0x303/0x770
> icmpv6_rcv+0xc12/0x1670
> ip6_protocol_deliver_rcu+0xb4a/0x1520
> ip6_input_finish+0x19c/0x400
> ip6_input+0xd4/0x240
> ipv6_rcv+0x1fd/0x330
> __netif_receive_skb_one_core+0x118/0x1c0
> __netif_receive_skb+0x21/0x150
> process_backlog+0x37e/0x1200
> __napi_poll.constprop.0+0xa5/0x5e0
> net_rx_action+0x4c0/0xf70
> handle_softirqs+0x204/0x9b0
> __do_softirq+0x10/0x18
>
> Cap it at 31. 31 and 32 are equivalent anyway: ip6_rt_gc_expire starts
> at 30*HZ (~30000 with HZ=1000), and such a value shifted right by 15 or
> more is already 0, so val - (val >> rt_elasticity) stops decaying well
> before 31. Values above 31 add no new behaviour, they only hit the UB.
>
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Cc: stable@vger.kernel.org
> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Thanks!
next prev parent reply other threads:[~2026-10-23 13:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 9:13 [PATCH net 0/5] net: fix misc signed overflows caused by bad sysctl values Jiayuan Chen
2026-10-23 9:13 ` [PATCH net 1/5] ipv6: restrict gc_elasticity to 31 Jiayuan Chen
2026-10-23 13:31 ` Fernando Fernandez Mancera [this message]
2026-10-23 9:13 ` [PATCH net 2/5] ipv4: fix shift-out-of-bounds in ip_rt_send_redirect() Jiayuan Chen
2026-10-23 14:11 ` Fernando Fernandez Mancera
2026-10-23 9:13 ` [PATCH net 3/5] ipv6: restrict mld_qrv to 255 Jiayuan Chen
2026-10-23 14:13 ` Fernando Fernandez Mancera
2026-10-23 9:13 ` [PATCH net 4/5] ipv4: restrict igmp_qrv " Jiayuan Chen
2026-10-23 14:14 ` Fernando Fernandez Mancera
2026-10-23 9:13 ` [PATCH net 5/5] net: restrict message_cost and message_burst to non-negative values Jiayuan Chen
2026-10-23 12:19 ` Joel Granados
2026-10-23 12:55 ` Fernando Fernandez Mancera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bb1fc73c-84b3-45a8-86e4-458498d0f80b@suse.de \
--to=fmancera@suse.de \
--cc=bronzed_45_vested@icloud.com \
--cc=chia-yu.chang@nokia-bell-labs.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@kernel.org \
--cc=fbl@redhat.com \
--cc=hannes@stressinduktion.org \
--cc=horms@kernel.org \
--cc=idosch@nvidia.com \
--cc=jiayuan.chen@linux.dev \
--cc=joel.granados@kernel.org \
--cc=kuba@kernel.org \
--cc=kuniyu@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=paulmck@kernel.org \
--cc=pmladek@suse.com \
--cc=razor@blackwall.org \
--cc=stable@vger.kernel.org \
--cc=yuuchihsu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®