Re: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support

[Florian Fainelli <f.fainelli@gmail.com>]

On 07/18/2017 12:37 PM, Florian Fainelli wrote:
> Adds support for the Broadcom reference board BCM947189ACDMBR which
> features the following:
> 
> * 128MB of DRAM
> * External MoCA support through a Broadcom BCM6802 chip
> * 1x external Gigabit PHY through the external BCM6802
> * 1x USB 2.0 port
> * 1x PCIE slot
> * Few configurable buttons and LEDs
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Rafal, any feedback on this?

> ---
>  arch/arm/boot/dts/Makefile            |  3 +-
>  arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
>  2 files changed, 99 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4b17f35dc9a7..236587e7f07d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm953012hr.dtb \
>  	bcm953012k.dtb
>  dtb-$(CONFIG_ARCH_BCM_53573) += \
> -	bcm47189-tenda-ac9.dtb
> +	bcm47189-tenda-ac9.dtb \
> +	bcm947189acdbmr.dtb
>  dtb-$(CONFIG_ARCH_BCM_63XX) += \
>  	bcm963138dvt.dtb
>  dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
> new file mode 100644
> index 000000000000..ef263412fea5
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
> @@ -0,0 +1,97 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + * Author: Florian Fainelli <f.fainelli@gmail.com>
> + *
> + * Licensed under the ISC license.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm53573.dtsi"
> +
> +/ {
> +	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
> +	model = "Broadcom BCM947189ACDBMR";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200 earlycon";
> +	};
> +
> +	memory {
> +		reg = <0x00000000 0x08000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		wps {
> +			label = "bcm53xx:blue:wps";
> +			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		5ghz {
> +			label = "bcm53xx:blue:5ghz";
> +			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		2ghz {
> +			label = "bcm53xx:blue:2ghz";
> +			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		restart {
> +			label = "Reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		wps {
> +			label = "WPS";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	spi {
> +		compatible = "spi-gpio";
> +		num-chipselects = <1>;
> +		gpio-sck = <&chipcommon 21 0>;
> +		gpio-miso = <&chipcommon 22 0>;
> +		gpio-mosi = <&chipcommon 23 0>;
> +		cs-gpios = <&chipcommon 24 0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* External BCM6802 MoCA chip is connected */
> +	};
> +};
> +
> +&pcie0 {
> +	ranges = <0x00000000 0 0 0 0 0x00100000>;
> +	#address-cells = <3>;
> +	#size-cells = <2>;
> +
> +	bridge@0,0,0 {
> +		reg = <0x0000 0 0 0 0>;
> +		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +
> +		wifi@0,1,0 {
> +			reg = <0x0000 0 0 0 0>;
> +			ranges = <0x00000000 0 0 0 0x00100000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +	};
> +};
> +
> +&usb2 {
> +	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
> +};
> 


-- 
Florian