Re: [PATCH] sh: hd64461: fix virq offsets

[John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>]

Hi Artur!

On Sun, 2023-07-09 at 14:13 +0200, Artur Rojek wrote:
> A recent change to start counting SuperH IRQ #s from 16 breaks support
> for the Hitachi HD64461 companion chip.
> 
> Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
> accommodate for the new virq numbering rules.
> 
> Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> ---
>  arch/sh/cchips/Kconfig        | 4 ++--
>  arch/sh/include/asm/hd64461.h | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
> index efde2edb5627..9659a0bc58de 100644
> --- a/arch/sh/cchips/Kconfig
> +++ b/arch/sh/cchips/Kconfig
> @@ -29,9 +29,9 @@ endchoice
>  config HD64461_IRQ
>  	int "HD64461 IRQ"
>  	depends on HD64461
> -	default "36"
> +	default "52"
>  	help
> -	  The default setting of the HD64461 IRQ is 36.
> +	  The default setting of the HD64461 IRQ is 52.
>  
>  	  Do not change this unless you know what you are doing.
>  
> diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
> index afb24cb034b1..6d85db6cf54b 100644
> --- a/arch/sh/include/asm/hd64461.h
> +++ b/arch/sh/include/asm/hd64461.h
> @@ -229,7 +229,7 @@
>  #define	HD64461_NIMR		HD64461_IO_OFFSET(0x5002)
>  
>  #define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
> -#define	OFFCHIP_IRQ_BASE	64
> +#define	OFFCHIP_IRQ_BASE	80
>  #define	HD64461_IRQ_NUM		16
>  
>  #define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)

I think it would be better to write this as (64 + 16) for consistency
with the other changes made by Sergey.

Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer
`. `'   Physicist
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913