From: Andrew Duggan <aduggan@synaptics.com>
To: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Jiri Kosina <jikos@kernel.org>, Lyude Paul <thatslyude@gmail.com>,
Nick Dyer <nick@shmanahar.org>,
Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 4/7] Input: synaptics-rmi4 - store the attn data in the driver
Date: Fri, 2 Dec 2016 16:34:01 -0800 [thread overview]
Message-ID: <bbf10707-4be9-1b87-8c75-a3e930146c58@synaptics.com> (raw)
In-Reply-To: <1480678916-6469-5-git-send-email-benjamin.tissoires@redhat.com>
On 12/02/2016 03:41 AM, Benjamin Tissoires wrote:
> Now that we have a proper API to set the attention data, there is
> no point in keeping it in the transport driver.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
> ---
>
> no changes in v2
> ---
> drivers/input/rmi4/rmi_driver.c | 5 ++---
> drivers/input/rmi4/rmi_f03.c | 13 +++++++------
> drivers/input/rmi4/rmi_f11.c | 12 ++++++------
> drivers/input/rmi4/rmi_f12.c | 43 +++++++++++++++++++++--------------------
> drivers/input/rmi4/rmi_f30.c | 11 ++++++-----
> include/linux/rmi.h | 5 ++---
> 6 files changed, 45 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> index 85062e4..05a3c4b 100644
> --- a/drivers/input/rmi4/rmi_driver.c
> +++ b/drivers/input/rmi4/rmi_driver.c
> @@ -155,7 +155,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
> if (!data)
> return 0;
>
> - if (!rmi_dev->xport->attn_data) {
> + if (!data->attn_data.data) {
> error = rmi_read_block(rmi_dev,
> data->f01_container->fd.data_base_addr + 1,
> data->irq_status, data->num_of_irq_regs);
> @@ -223,8 +223,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
> count = kfifo_get(&drvdata->attn_fifo, &attn_data);
> if (count) {
> *(drvdata->irq_status) = attn_data.irq_status;
> - rmi_dev->xport->attn_data = attn_data.data;
> - rmi_dev->xport->attn_size = attn_data.size;
> + drvdata->attn_data = attn_data;
> }
>
> ret = rmi_process_interrupt_requests(rmi_dev);
> diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
> index 06279cd..996dcbb 100644
> --- a/drivers/input/rmi4/rmi_f03.c
> +++ b/drivers/input/rmi4/rmi_f03.c
> @@ -166,6 +166,7 @@ static int rmi_f03_config(struct rmi_function *fn)
> static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
> {
> struct rmi_device *rmi_dev = fn->rmi_dev;
> + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> struct f03_data *f03 = dev_get_drvdata(&fn->dev);
> u16 data_addr = fn->fd.data_base_addr;
> const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
> @@ -176,20 +177,20 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
> int i;
> int ret;
>
> - if (!rmi_dev || !rmi_dev->xport)
> + if (!rmi_dev)
> return -ENODEV;
>
> - if (rmi_dev->xport->attn_data) {
> + if (drvdata->attn_data.data) {
> /* First grab the data passed by the transport device */
> - if (rmi_dev->xport->attn_size < ob_len) {
> + if (drvdata->attn_data.size < ob_len) {
> dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
> return 0;
> }
>
> - memcpy(obs, rmi_dev->xport->attn_data, ob_len);
> + memcpy(obs, drvdata->attn_data.data, ob_len);
>
> - rmi_dev->xport->attn_data += ob_len;
> - rmi_dev->xport->attn_size -= ob_len;
> + drvdata->attn_data.data += ob_len;
> + drvdata->attn_data.size -= ob_len;
> } else {
> /* Grab all of the data registers, and check them for data */
> ret = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
> index 44fc275..bc5e37f 100644
> --- a/drivers/input/rmi4/rmi_f11.c
> +++ b/drivers/input/rmi4/rmi_f11.c
> @@ -1284,19 +1284,19 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
> int error;
> int valid_bytes = f11->sensor.pkt_size;
>
> - if (rmi_dev->xport->attn_data) {
> + if (drvdata->attn_data.data) {
> /*
> * The valid data in the attention report is less then
> * expected. Only process the complete fingers.
> */
> - if (f11->sensor.attn_size > rmi_dev->xport->attn_size)
> - valid_bytes = rmi_dev->xport->attn_size;
> + if (f11->sensor.attn_size > drvdata->attn_data.size)
> + valid_bytes = drvdata->attn_data.size;
> else
> valid_bytes = f11->sensor.attn_size;
> - memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
> + memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
> valid_bytes);
> - rmi_dev->xport->attn_data += f11->sensor.attn_size;
> - rmi_dev->xport->attn_size -= f11->sensor.attn_size;
> + drvdata->attn_data.data += f11->sensor.attn_size;
> + drvdata->attn_data.size -= f11->sensor.attn_size;
> } else {
> error = rmi_read_block(rmi_dev,
> data_base_addr, f11->sensor.data_pkt,
> diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
> index 82a4964..8c5360c 100644
> --- a/drivers/input/rmi4/rmi_f12.c
> +++ b/drivers/input/rmi4/rmi_f12.c
> @@ -208,19 +208,20 @@ static int rmi_f12_attention(struct rmi_function *fn,
> {
> int retval;
> struct rmi_device *rmi_dev = fn->rmi_dev;
> + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> struct f12_data *f12 = dev_get_drvdata(&fn->dev);
> struct rmi_2d_sensor *sensor = &f12->sensor;
> int valid_bytes = sensor->pkt_size;
>
> - if (rmi_dev->xport->attn_data) {
> - if (sensor->attn_size > rmi_dev->xport->attn_size)
> - valid_bytes = rmi_dev->xport->attn_size;
> + if (drvdata->attn_data.data) {
> + if (sensor->attn_size > drvdata->attn_data.size)
> + valid_bytes = drvdata->attn_data.size;
> else
> valid_bytes = sensor->attn_size;
> - memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
> + memcpy(sensor->data_pkt, drvdata->attn_data.data,
> valid_bytes);
> - rmi_dev->xport->attn_data += sensor->attn_size;
> - rmi_dev->xport->attn_size -= sensor->attn_size;
> + drvdata->attn_data.data += sensor->attn_size;
> + drvdata->attn_data.size -= sensor->attn_size;
> } else {
> retval = rmi_read_block(rmi_dev, f12->data_addr,
> sensor->data_pkt, sensor->pkt_size);
> @@ -323,7 +324,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
> const struct rmi_register_desc_item *item;
> struct rmi_2d_sensor *sensor;
> struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
> - struct rmi_transport_dev *xport = rmi_dev->xport;
> + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> u16 data_offset = 0;
>
> rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
> @@ -422,7 +423,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
> * HID attention reports.
> */
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
> @@ -436,15 +437,15 @@ static int rmi_f12_probe(struct rmi_function *fn)
> }
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
> @@ -456,22 +457,22 @@ static int rmi_f12_probe(struct rmi_function *fn)
> }
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
> - if (item && !xport->attn_data) {
> + if (item && !drvdata->attn_data.data) {
> f12->data6 = item;
> f12->data6_offset = data_offset;
> data_offset += item->reg_size;
> }
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
> - if (item && !xport->attn_data) {
> + if (item && !drvdata->attn_data.data) {
> f12->data9 = item;
> f12->data9_offset = data_offset;
> data_offset += item->reg_size;
> @@ -480,27 +481,27 @@ static int rmi_f12_probe(struct rmi_function *fn)
> }
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
> - if (item && !xport->attn_data)
> + if (item && !drvdata->attn_data.data)
> data_offset += item->reg_size;
>
> item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
> - if (item && !xport->attn_data) {
> + if (item && !drvdata->attn_data.data) {
> f12->data15 = item;
> f12->data15_offset = data_offset;
> data_offset += item->reg_size;
> diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
> index f696137..f4b491e 100644
> --- a/drivers/input/rmi4/rmi_f30.c
> +++ b/drivers/input/rmi4/rmi_f30.c
> @@ -99,6 +99,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
> {
> struct f30_data *f30 = dev_get_drvdata(&fn->dev);
> struct rmi_device *rmi_dev = fn->rmi_dev;
> + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> int retval;
> int gpiled = 0;
> int value = 0;
> @@ -109,15 +110,15 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
> return 0;
>
> /* Read the gpi led data. */
> - if (rmi_dev->xport->attn_data) {
> - if (rmi_dev->xport->attn_size < f30->register_count) {
> + if (drvdata->attn_data.data) {
> + if (drvdata->attn_data.size < f30->register_count) {
> dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
> return 0;
> }
> - memcpy(f30->data_regs, rmi_dev->xport->attn_data,
> + memcpy(f30->data_regs, drvdata->attn_data.data,
> f30->register_count);
> - rmi_dev->xport->attn_data += f30->register_count;
> - rmi_dev->xport->attn_size -= f30->register_count;
> + drvdata->attn_data.data += f30->register_count;
> + drvdata->attn_data.size -= f30->register_count;
> } else {
> retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
> f30->data_regs, f30->register_count);
> diff --git a/include/linux/rmi.h b/include/linux/rmi.h
> index 1d48656..ac910f7 100644
> --- a/include/linux/rmi.h
> +++ b/include/linux/rmi.h
> @@ -272,9 +272,6 @@ struct rmi_transport_dev {
> struct rmi_device_platform_data pdata;
>
> struct input_dev *input;
> -
> - void *attn_data;
> - int attn_size;
> };
>
> /**
> @@ -364,6 +361,8 @@ struct rmi_driver_data {
>
> bool enabled;
> struct mutex enabled_mutex;
> +
> + struct rmi4_attn_data attn_data;
> DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
> };
>
next prev parent reply other threads:[~2016-12-03 0:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 11:41 [PATCH v2 0/7] RMI4 cleanups and switch hid-rmi to rmi_core Benjamin Tissoires
2016-12-02 11:41 ` [PATCH v2 1/7] Input: synaptics-rmi4 - add support for F03 Benjamin Tissoires
2016-12-03 18:29 ` Dmitry Torokhov
2016-12-02 11:41 ` [PATCH v2 2/7] Input: synaptics-rmi4 - F03: grab data passed by transport device Benjamin Tissoires
2016-12-02 11:41 ` [PATCH v2 3/7] Input: synaptics-rmi4 - allow to add attention data Benjamin Tissoires
2016-12-03 0:33 ` Andrew Duggan
2016-12-03 18:29 ` Dmitry Torokhov
2016-12-02 11:41 ` [PATCH v2 4/7] Input: synaptics-rmi4 - store the attn data in the driver Benjamin Tissoires
2016-12-03 0:34 ` Andrew Duggan [this message]
2016-12-03 18:29 ` Dmitry Torokhov
2016-12-02 11:41 ` [PATCH v2 5/7] HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4 Benjamin Tissoires
2016-12-02 11:41 ` [PATCH v2 6/7] HID: rmi: Handle all Synaptics touchpads using hid-rmi Benjamin Tissoires
2016-12-02 11:41 ` [PATCH v2 7/7] HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock " Benjamin Tissoires
2016-12-03 0:33 ` [PATCH v2 0/7] RMI4 cleanups and switch hid-rmi to rmi_core Andrew Duggan
2016-12-03 18:32 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bbf10707-4be9-1b87-8c75-a3e930146c58@synaptics.com \
--to=aduggan@synaptics.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dennis.wassenberg@secunet.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=thatslyude@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®