mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Jonathan McDowell <noodles@earth.li>
Cc: Jarkko Sakkinen <jarkko@kernel.org>,
	Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
	James Bottomley <James.Bottomley@hansenpartnership.com>,
	Stefan Berger <stefanb@linux.ibm.com>,
	linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] tpm, tpm_tis: Workaround failed command reception on Infineon devices
Date: Mon, 10 Mar 2025 15:12:18 +0100	[thread overview]
Message-ID: <bc28fec8-6ab3-4633-86ea-fd1b35ca91c8@molgen.mpg.de> (raw)
In-Reply-To: <Z87Y69l5_GbzlLfp@earth.li>

Dear Jonathan,


Some nits, should you resend. Feel free to ignore. The verb *work 
around* is spelled with a space.

Am 10.03.25 um 13:19 schrieb Jonathan McDowell:
> From: Jonathan McDowell <noodles@meta.com>
> 
> Some Infineon devices have a issue where the status register will get
> stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
> simply a matter of requiring a longer timeout; the work around is to

The noun without. ;-)

> retry the command submission. Add appropriate logic to do this in the
> send path.

Does the workaround have downsides?

> This is fixed in later firmware revisions, but those are not always
> available, and cannot generally be easily updated from outside a
> firmware environment.

Please mention the affected revisions. Is there an errata for tis.

> Testing has been performed with a simple repeated loop of doing a
> TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
> at:
> 
>   https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go

Awesome. Thank you for sharing.

> It can take several hours to reproduce, and several million operations.
> 
> Signed-off-by: Jonathan McDowell <noodles@meta.com>
> ---
> v2: Rename flag to TPM_TIS_STATUS_VALID_RETRY
> 
>   drivers/char/tpm/tpm_tis_core.c | 17 ++++++++++++++---
>   drivers/char/tpm/tpm_tis_core.h |  1 +
>   include/linux/tpm.h             |  1 +
>   3 files changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/ 
> tpm_tis_core.c
> index c969a1793184..4ab69c3e103c 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -463,7 +463,10 @@ static int tpm_tis_send_data(struct tpm_chip *chip, 
> const u8 *buf, size_t len)
> 
>           if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
>                       &priv->int_queue, false) < 0) {
> -            rc = -ETIME;
> +            if (test_bit(TPM_TIS_STATUS_VALID_RETRY, &priv->flags))
> +                rc = -EAGAIN;
> +            else
> +                rc = -ETIME;

I’d use a ternary operator as the same variable is assigned to.

>               goto out_err;
>           }
>           status = tpm_tis_status(chip);
> @@ -480,7 +483,10 @@ static int tpm_tis_send_data(struct tpm_chip *chip, 
> const u8 *buf, size_t len)
> 
>       if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
>                   &priv->int_queue, false) < 0) {
> -        rc = -ETIME;
> +        if (test_bit(TPM_TIS_STATUS_VALID_RETRY, &priv->flags))
> +            rc = -EAGAIN;
> +        else
> +            rc = -ETIME;
>           goto out_err;
>       }
>       status = tpm_tis_status(chip);
> @@ -545,9 +551,11 @@ static int tpm_tis_send_main(struct tpm_chip *chip, 
> const u8 *buf, size_t len)
>           if (rc >= 0)
>               /* Data transfer done successfully */
>               break;
> -        else if (rc != -EIO)
> +        else if (rc != EAGAIN && rc != -EIO)
>               /* Data transfer failed, not recoverable */
>               return rc;
> +
> +        usleep_range(priv->timeout_min, priv->timeout_max);
>       }
> 
>       /* go and do it */
> @@ -1143,6 +1151,9 @@ int tpm_tis_core_init(struct device *dev, struct 
> tpm_tis_data *priv, int irq,
>           priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
>       }
> 
> +    if (priv->manufacturer_id == TPM_VID_IFX)
> +        set_bit(TPM_TIS_STATUS_VALID_RETRY, &priv->flags);
> +
>       if (is_bsw()) {
>           priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
>                       ILB_REMAP_SIZE);
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/ 
> tpm_tis_core.h
> index 690ad8e9b731..970d02c337c7 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -89,6 +89,7 @@ enum tpm_tis_flags {
>       TPM_TIS_INVALID_STATUS        = 1,
>       TPM_TIS_DEFAULT_CANCELLATION    = 2,
>       TPM_TIS_IRQ_TESTED        = 3,
> +    TPM_TIS_STATUS_VALID_RETRY    = 4,
>   };
> 
>   struct tpm_tis_data {
> diff --git a/include/linux/tpm.h b/include/linux/tpm.h
> index 20a40ade8030..6c3125300c00 100644
> --- a/include/linux/tpm.h
> +++ b/include/linux/tpm.h
> @@ -335,6 +335,7 @@ enum tpm2_cc_attrs {
>   #define TPM_VID_WINBOND  0x1050
>   #define TPM_VID_STM      0x104A
>   #define TPM_VID_ATML     0x1114
> +#define TPM_VID_IFX      0x15D1
> 
>   enum tpm_chip_flags {
>       TPM_CHIP_FLAG_BOOTSTRAPPED        = BIT(0),


  reply	other threads:[~2025-03-10 14:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-06  9:00 [PATCH] " Jonathan McDowell
2025-03-06 22:23 ` Jarkko Sakkinen
2025-03-07 16:36   ` Jonathan McDowell
2025-03-07 16:45     ` Jarkko Sakkinen
2025-03-10 12:19       ` [PATCH v2] " Jonathan McDowell
2025-03-10 14:12         ` Paul Menzel [this message]
2025-03-11  9:46         ` Jarkko Sakkinen
2025-03-21 16:49         ` Jonathan McDowell
2025-03-22 21:10           ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bc28fec8-6ab3-4633-86ea-fd1b35ca91c8@molgen.mpg.de \
    --to=pmenzel@molgen.mpg.de \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=noodles@earth.li \
    --cc=peterhuewe@gmx.de \
    --cc=stefanb@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®